User`s guide

Canceling a Job

2-21

Basic Operations

Canceling a Job

There are several ways to cancel a job. This section describes how to cancel a job

using the Stop key and using the System Monitor screen.

NOTE

Several copies/prints may be output even after you canceled a job.

Using the Stop Key

You can cancel a copy, print, or remote scan job using the Stop key.

Press (Stop).

● If the machine is handling only one job:

❑ Proceed to step 4.

● If the machine has multiple copy or print jobs:

❑

Proceed to step 2.

NOTE

•

The current job is listed first on the Status screen.

•

The LCD display can display characters in ASCII code. Using other character codes may

cause characters garbled on the LCD display.

•

The messages displayed on the Status screen are as follows:

- <Printing> = Current job

- <Paused> = Current job that has been temporarily stopped by pressing (Stop).

- <Waiting> = Reserved jobs

Use [ ] or [ ] to select the job

you want to cancel ➞ press [OK].

Copy Paused

Printer Waiting

Report Waiting

Copy Waiting

Status

Downloaded from ManualsPrinter.com Manuals