User`s guide

Basic Copying

2-12

Basic Operations

Basic Copying

This section describes the flow of basic copy operations.

NOTE

•

For instructions on turning ON the machine, see “Main Power and Control Panel Power,”

on p. 1-15.

•

For instructions on routine maintenance, see Chapter 6, “Routine Maintenance,” in the

Reference Guide.

•

The output quality may deteriorate if the platen glass is dirty. Always keep the platen

glass clean.

•

Do not touch the optional feeder or platen cover while copying. Rocking the feeder or

platen cover may distort the image being copied.

Press the appropriate keys in accordance with the messages

displayed on the LCD display.

If there are no messages displayed, proceed to step 2.

● If the message <Dept. ID/Pass Input> appears:

NOTE

For instructions on using Department ID Management, see Chapter 4, “System Manager Settings,”

in the

Reference Guide

❑ Enter your Department ID (up to seven

digits) using - (numeric keys).

❑ Use [ ] or [ ] to select <Password:> ➞

enter the password (up to seven digits)

using - (numeric keys).

❑ Press (ID).

ID Key after Input

When done press ID key

Dept. ID:0000001

Password:

Dept. ID/Pass Input

Password:*******

ID Key after Input

When done press ID key

Dept. ID:0000001

Downloaded from ManualsPrinter.com Manuals