User`s guide

List of Error Messages

4-9

Troubleshooting

Staple jam

Cause A staple jam may have occurred in the Finisher-U2.

Remedy Check if a staple jam has occurred. (See Chapter 7, “Troubleshooting,” in the

Reference Guide.)

This func. requires Optional equipment.

Cause The key has been pressed when the machine is not equipped with the

optional network kit.

Remedy To make the scanning function available, the optional network kit is required.

This size cannot be stapled

Cause The machine cannot staple the printouts because the selected paper size is

unavailable for stapling.

Remedy Use the suitable paper size for stapling. (See Chapter 2, “Advanced

Operations,” in the Copying Guide.)

This size cannot be offset

Cause The machine cannot offset the printouts because the selected paper size is

unavailable for offset copying.

Remedy Use the suitable paper size for offset copying. (See Chapter 2, “Advanced

Operations,” in the Copying Guide.)

Toner low/Prepare new toner

Cause Toner is running out.

Remedy Rock the toner cartridge to redistribute the toner evenly inside the cartridge. If

the message persists, install a new cartridge.

Tray A full/Remove paper

Cause Tray A is full of paper.

Remedy Remove the prints from Tray A. (See Chapter 5, “Optional Equipment,” in the

Reference Guide.)

Downloaded from ManualsPrinter.com Manuals