User`s guide

Placing Originals
1-22
1
Introduction to Copying
For instructions on cleaning the original scanning area, see Chapter 7, “Routine
Maintenance,” in the Reference Guide.
IMPORTANT
• Do not add or remove originals while they are being scanned.
• When scanning is complete, remove the originals from the original output area to
avoid paper jams.
NOTE
• When you are enlarging an LTR or STMT original onto 11" x 17" or LGL paper,
place the original horizontally.
• The scanned originals are output to the original output area in the order that they
are fed into the feeder.
• You can place different size originals together into the feeder if you set the Different
Size Originals mode. (See “Different Size Originals,” on p. 3-22.)
Original Output Area