User`s guide

Memory Keys
3-34
3
Special Copying Features
NOTE
• For instructions on entering characters, see Chapter 2, “Basic Operations,” in the
Reference Guide.
• If you press [OK] without entering any characters, the key name reverts to its
current name (default M1 to M4).
6 Press [Cancel] ➞ [Done].
The display returns to the Copy Basic Features screen.
NOTE
Pressing [Cancel] ➞ [Done] only names the selected key ([M1] to [M4]), but does
not recall the stored settings. If you press [OK]
➞ [Done], the name is stored in the
selected key ([M1] to [M4]), and the settings are recalled at the same time.
Recalling Copy Settings
1 Press [Special Features] ➞ [Mode Memory].
If necessary, see the screen shot in step 2 of “Storing Copy Settings,” on p. 3-28.
2 Select the key containing the copy settings that you want to
recall.
3 Verify the settings ➞ press [OK] ➞ [Done].
If you select a key that does not have copy settings stored in it, [OK] is grayed
out and cannot be pressed. Select another key that has copy settings stored in it,
or press [Cancel].