User`s guide

Frame Erase
3-21
3
Special Copying Features
NOTE
• To enter values in millimeters, press [mm].
• When entering the value in millimeters, you can also use - (numeric keys),
and (Clear) to clear your entry.
• You can change the value by pressing [-] or [+], even if you have entered the value
using - (numeric keys).
• If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
• The default setting is ‘3/4" (18 mm)’. The maximum binding erase width that you
can set is ‘13/16" (20 mm)’.
5 Press (Start).
Copying starts.
NOTE
• To cancel this setting, press [Special Features] ➞ [Frame Erase] ➞ [Cancel].
• To cancel all settings and return the machine to the Standard mode, press
(Reset).