User`s guide

Frame Erase
3-17
3
Special Copying Features
3 Select the size of the bound original when it is open ➞ press
[Next].
IMPORTANT
You can set the Book Frame Erase mode only for the original paper sizes shown on
the touch panel display.
NOTE
To select an A or B series paper size, press [A/B-size].
4 Press [-] or [+] to set the frame erase widths.
NOTE
• To enter values in millimeters, press [mm].
• When entering values in millimeters, you can also use - (numeric keys), and
(Clear) to clear your entries.
• You can change the values by pressing [-] or [+], even if you have entered the
values using - (numeric keys).
• If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
• The default settings are ‘3/8" (10 mm)’ for [Center] and ‘1/8" (4 mm)’ for [Top],
[Left], [Right], and [Bottom]. The maximum book frame erase width that you can set
is ‘1 15/16" (50 mm)’.