imagePROGRAF PRO-6000S series (PDF) User Manual (Mac)

1 second / 3 seconds / 5 sec-
onds / 7 seconds / 9 seconds
After one line has been printed, the next one will be printed after the set time
has elapsed.
* Increase the interval depending on the occurrence of bleeding and uneven col-
oring.
Roll Paper Safety Margin
Allows you to specify the length of the white margins on the edges of the paper in order to make even
significantly curled paper adsorb to the platen.
Settings Details
Printer Default Applies the settings configured in the control panel of the printer unit.
3mm
Prints in standard-size.
* Choose this setting if there are no particular problems when printing.
20mm
Choose this setting in case of chafing against the print head, for example when using significant-
ly curled paper.
Cut Speed
Allows you to select the speed of automatic cutting. Use it to adjust the automatic cutting function when
clean cutting is not possible.
Settings Details
Printer Default Applies the settings configured in the control panel of the printer unit.
Fast Choose this if clean cut surfaces are not possible with the Standard setting.
Standard Choose this if there are no particular problems with automatic cutting.
Slow
Choose it when using adhesive paper in order to prevent the glue from sticking to the cutter and
to avoid a drop in cutting performance.
Unidirectional Printing
Suppresses uneven coloring and line shifts during printing.
To perform unidirectional printing, check this check box.
Calibration Value
Allows you to apply the results of calibration performed on the printer. To apply the calibration values,
select Use Value.
520