iPF840 User's Guide Ver.1.00

Hard disk capacity
Personal mail boxes (Permanent storage
area)
180 GB
Print job storage capacity Common Box 100 jobs
Personal Boxes 100 jobs
Interface
USB Format Internal port
Mode Full-speed (12 Mbps), high-speed (480 Mbps), bulk transfer
Connector Series B (4-pin)
Ethernet Format Internal port
Specification IEEE 802.3 10Base-T,
IEEE 802.3u 100Base-TX/Auto-Negotiation,
IEEE 802.3ab 1000Base-T/Auto-Negotiation,
IEEE 802.3x Full Duplex
IEEE 802.3az EEE
Protocols SNMP (supports Canon-MIB), HTTP, TCP/IP (IPv4/IPv6)
Ink
For information on the ink the printer supports, see "Ink Tanks." ➔P.566
Paper
For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See "Displaying
the Paper Reference Guide.") ➔P.335
Paper width For information on the paper widths the printer supports, see "Paper Sizes." ➔P.332
Minimum paper length Rolls 203 mm (8.0 in)
Sheets
Maximum printable length (*1) Rolls 18 m (19.7 yd)
Sheets 1,600 mm (63.0 in)
Thickness Rolls 0.07–0.8 mm (0.0028–0.031 in)
Sheets 0.07–0.8 mm (0.0028–0.031 in)
Roll maximum outer diameter 150 mm (6 in) or shorter
Supported paper core inner diameter 2 inches / 3 inches
Print area For details, see "Print Area." ➔P.659
*1:Varies depending on the operating system or application.
Optional
Roll Holder Set Roll Holder Set RH2-44
Print Area
Print Area
A margin required by the printer is added with respect to the size of paper loaded in the printer. Except in border-
less printing, the actual printing area corresponds to the paper size minus the space for this margin.
Note
•
Printable Area: The area that can be printed.
• There is no margin (that is, a margin of 0 mm) during borderless printing on rolls.
• Recommended Print Area: We recommend printing within this area.
• To print so that your original matches the print area exactly, use an oversized paper size that includes the required
margin. (See "Printing on Oversize Paper.") ➔P.83
iPF840 Print Area
User's Guide
Specifications Printer Specifications
659