iPF840 User's Guide Ver.1.00
4
Close the Top Cover.
5
Tape down printer covers to secure them, in the reverse or-
der of tape removal during installation.
6
Remove and package the Stand by reversing the installation procedure, when it was attached to the printer.
7
Disassemble and repackage the Stand by following the installation procedure in reverse.
8
Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package them in a
shipping box.
Reinstalling the Printer
Reinstalling the Printer
The basic workflow for reinstalling the printer is as follows.
For detailed instructions, see the Setup Guide.
Assemble the stand
1
Referring to the Printer Stand Setup Guide, assemble the Stand.
Caution
•
The Stand must be assembled by at least two people on a flat surface. Attempting assembly by yourself
poses a risk of injury or bending the Stand.
•
When assembling the Stand, lock the casters. In addition, always unlock the casters before moving the
assembled Stand. Attempting to move the stand when the casters are locked poses a risk of injury or
damage to the location site.
2
Attach the Roll Unit to the Stand.
iPF840
Reinstalling the Printer
User's Guide
Maintenance and Consumables Other Maintenance
599