iPF840 User's Guide Ver.1.00

*3:Even if Show Job Log is Off in System Setup, it is displayed if a password is configured in Change Password in the
Admin. Menu and the password has been authenticated.
Set./Adj. Menu
Limited items are displayed during printing. The displayed items are indicated by annotations.
Setting Item Description, Instructions
Test
Print
Nozzle Check Print a test pattern to check the nozzles.
Status Print Print information about the setting values and condition of
the printer.
Interface Print Print interface settings information.
GL2 Set Print Print the settings as specified in GL2 Settings.
Paper Details Print the paper settings as specified in Paper Details.
Print Job Log Print information to match the Job Log display state.
This is not printed when the Job Log is configured to not
display.
The maximum number of history records in models fitted
with a hard disk is 32.
The maximum number of history records in models not fit-
ted with a hard disk is 10.
Menu Map Print the menu structure.
Color Palette Print the GL2 color palette.
Adjust
Printer
Head
Posi.
Adj.
Standard An adjustment pattern is printed and the print position is
automatically adjusted to fix misaligned printing. Select
Standard if vertical lines in printed material are warped or
colors are out of alignment. Select Standard also if the
printing results are not improved by executing Simple.
(See "Automatic Adjustment to Straighten Lines and Col-
ors.") ➔P.550
Simple An adjustment pattern is printed and the print position is
automatically adjusted to fix misaligned printing. Simple
executes a simple adjustment in a short time. Select Sim-
ple when frequently adjusting the printhead, such as dur-
ing daily maintenance. (See "Automatic Adjustment to
Straighten Lines and Colors.") ➔P.550
Other Initial adjustmt Printhead position adjustment is executed during the initial
setup. If adjusting the printhead position has not been per-
formed such as due to an error during initial setup or the
state of the operating settings when replacing the print-
head, select Initial adjustmt. (See "Adjustment When In-
stalling the Printhead.") ➔P.553
Manual Input the setting values from the adjustment pattern print-
ing results and adjust the printing position to fix mis-
aligned printing. Normally, select Standard. However,
when printing on special paper, or if printing is not im-
proved after Standard, try Manual. (See "Manual Adjust-
ment to Straighten Lines and Colors.") ➔P.552
Head Inc. Adj. Print a test pattern for adjustment of the Printhead orienta-
tion. (See "Adjusting Line Misalignment.") ➔P.554
Feed
Priority
Adj. Pri-
ority
Automatic Specify exact paper feeding, if desired. Normally, select
Automatic. Choose Print Quality for attractive printing.
Choosing Print Quality also makes banding less noticea-
ble. Choose Print Length if you prefer to feed the paper
an exact amount.
Print Quality
Print Length
Adj.
Quality
Auto(GenuinePpr) Specify this mode with paper identified in the Paper Ref-
erence Guide. (See "Displaying the Paper Reference
Guide.") ➔P.335
Menu Settings iPF840
User's Guide
Control Panel Printer Menu
448