iPF840 User's Guide Ver.1.00

Condition Status Judgment result
Condition 6 Does the width of roll paper loaded in the printer
accommodate the width of the paper size specified
in the print job?
Neither roll paper 1 nor roll paper 2
accommodates the paper size width
specified in the print job
Go to Condition 7
Both roll paper 1 and roll paper 2 ac-
commodate the paper size width
specified in the print job
Condition 7 Are the widths of roll paper 1 and roll paper 2 dif-
ferent?
The roll paper widths are different The roll paper with the
smaller difference be-
tween the paper size
width and the width
specified in the print job
is selected
The roll paper width is the same The roll paper currently
fed to the platen is se-
lected (*1)
*1:In the following case, neither roll paper 1 nor roll paper 2 is fed to the platen. In this case, roll paper 1 is selected.
• When the printer enters sleep mode and then resumes
• When the printer is turned on
• When cut sheet is supplied and ejected
Roll Paper Switching Method iPF840
User's Guide
Enhanced Printing Options Using double-roll printing
42