User manual

41
Error Messages
Error Message Cause Corrective Action
Mail box full. Now printing
without saving data.
No more space is available on the
printer's hard disk, so jobs are now
printed without saving them. (Print
jobs can no longer be saved on the
hard disk.)
After printing, this message is cleared.
Maximum jobs stored. 100 jobs are stored in the personal
box.
Delete unneeded jobs stored in personal boxes.
(→"Deleting Saved Jobs," User Manual)
Execute printhead cleaning. The Printhead nozzles are
clogged.
Follow these steps to clean the Printhead .
If this message is still displayed, replace the
Printhead .
Cannot adjust printhead. The Printhead nozzles are
clogged.
Execute Head Posi. Adj. again, as follows.
Press the OK button to clear the error.1.
Print a test pattern to check the nozzles.2.
Clean the Printhead if the nozzles are clogged.3.
Execute Head Posi. Adj. again.4.
The Printhead cannot be aligned;
highly transparent film is loaded.
Press the OK button to clear the error.
(→"Checking for Nozzle Clogging," User Manual)
(→
, If Vertical Lines are Warped or Colors are
Misaligned)
(→ , If Printing is Faint)
(→
, If Vertical Lines are Warped or Colors are
Misaligned)
We recommend using a type of paper that you often
use, other than film, for Printhead adjustment.
Stop printing by pressing ▲ or ▼ to select Stop
Printing .
Clean the Printhead .2.
1.
(→
, If Printing is Faint)
(→
, Replacing the Printhead)
Press ▲ or ▼ to select Print , and then press the OK
button to resume printing. However, note that this
error may affect the printing quality.
If OK is shown on the Display Screen , clean the
Printhead .
If this message is still displayed, replace the
Printhead .
Clean the Printhead .2.
(→
, If Printing is Faint)
(→
, Replacing the Printhead)
Press the OK button on the Control Panel to stop
printing.
1.
Delete unneeded jobs stored in personal boxes (box
numbers in the range 01–29).
(→"Deleting Saved Jobs," User Manual)