User Manual for Windows
Color adjustment
• Default settings will be restored if you select MAIN MENU > System Setup > Reset PaprSetngs > Y es .
Because information added or updated using the Media Conguration T ool is also deleted, if paper of
which information was added using the Media Conguration T ool was used for color calibration and is
now deleted, such color calibration can no longer be applied to any type of paper . T o apply the results
of color calibration, perform color calibration again using a paper included originally in the default
settings that is compatible with color calibration. See the Media Conguration T ool Guide (Windows)
or Media Conguration T ool Guide (Macintosh).
Note
• W e recommend using only one type of paper for color calibration. Using the same type of paper for
color calibration can improve color consistency .
• For better color consistency , we recommend performing color calibration under the same conditions of
temperature and humidity each time.
• For further adjustment of the color of documents as printed applying color calibration, adjust the color in
the printer driver . ( → P .254)
• Y ou can check when color calibration was executed and what paper was used from Status Print ,
imagePROGRAF Status Monitor (in Windows) or imagePROGRAF Printmonitor (on a Macintosh
computer) in the MAIN MENU on the Control Panel .
For menu details, see “Main Menu Settings”. (→P .49)
For details on imagePROGRAF Status Monitor , refer to the imagePROGRAF Status Monitor help.
For details on imagePROGRAF Printmonitor , refer to the imagePROGRAF Printmonitor help.
666 Maintenance