User Manual for Windows

Handling rolls
Removing the Roll from the Printer
Caution
• If you have activated automatic detection of the remaining roll paper , always follow the steps below to
remove rolls. Y ou will be unable to manage the amount of roll paper left if you move the Release Lever
and remove the roll before the barcode is printed.
1. Press the Load/Eject button.
A conrmation message is displayed regarding removal of the roll.
2. Press the OK button.
The roll can now be removed.
Note
• If you need to cut the roll, execute Paper Cutting on the Control Panel . ( → P .193)
• If you have selected Media Menu > Chk Remain.Roll > On in the printer menu and the printed
document has been ejected, a barcode and brief text message are printed on the leading edge of
rolls.
If the document is not cut but kept in the printer , only the text message is printed. In this case,
cut the roll with scissors and remove the sheet.
3. Open the T op Cover and lift the Ejection Guide .
186 Handling Paper