Utility Guide

Usage Cautions
Take note of the following cautions when using the Canon imagePROGRAF Print Utility.
- If you change the HP-GL/2 setting on the printer control panel, problems such as the
position of the image being shifted or part of the image not being printed may occur.
Always set the following items in GL2 Settings on the control panel to the printer default
values.
Setting Item Default value
Margin 3mm(Standard)
Auto Rotate Off
Oversize* On
On-the-Fly Off
PageSizeProcess1* Off
Detect img size* Off
* indicates items that are only able to be set for certain models.
- If the Color Mode is set to Monochrome in Print Settings in the Canon imagePROGRAF
Print Utility, printing is performed in monochrome even if the Color Mode is set to color in
GL2 Settings on the printer control panel.
- If the print data cannot be correctly sent to the printer for some reason, a solid black image
may be printed. If this happens, you should update the printer firmware to the latest
version to ensure that a solid black image is not printed.
7