User's Manual

Setting Details
ColorSync ➔P.311 Enables color matching by using the ColorSync function of OS X. Select this if you want to
perform soft proofing using ColorSync before printing.
Note
• You need to set each correction on the printer driver.
• ColorSync needs to be selected in the Color Matching panel of the driver in order to select ColorSync.
• Matching Method
You can select a matching method to suit the print job.
•
Gamma
You can adjust the gradation of intermediate tones in an image.
2.2 is normally selected. If you want a softer im-
pression than 2.2, select 1.8.
Note
• You can select only after Driver Matching Mode has been selected in Matching Mode.
• Input Profile
Select the input profile.
Note
• You can select only after ICC Matching Mode has been selected in Matching Mode.
•
Printer Profile
Select the printer profile.
Note
• You can select only after ICC Matching Mode has been selected in Matching Mode.
• Soft Proof
When you place a checkmark here, ColorSync applies to the preview area.
Note
• You can select only after ColorSync has been selected in Matching Mode.
Matching
iPF780
User's Guide
Mac OS Software Preview
308