Basic Guide

Assemble the stand

Referring to the Printer Stand Setup Guide, assemble

the Stand.

Caution

•

The Stand must be assembled by at least two people on a flat surface. Attempting assembly by yourself

poses a risk of injury or bending the Stand.

•

When assembling the Stand, lock all four of the casters. Attempting to move the stand when the casters

are not locked poses a risk of injury or damage to the location site.

•

Before moving the assembled stand, lift the sup-

port rod to the position shown (a) and unlock all

four casters. Moving the stand with the support

rod lowered or the casters locked may cause in-

jury or damage the area of installation or basket

cloth.

OFF

Note

•

The Stand that can be used with this printer is Printer Stand ST-34 and Printer Stand ST-33.

•

The Stand is described in the illustration of Printer Stand ST-34. Note that the illustrations may look differ-

ent from the appearance of your printer in some cases.

Reinstalling the Printer

iPF770 Series

Basic Guide

Printer Relocation Preparing to Transfer the Printer