Basic Guide

l Output Tray
All printed documents are ejected from this slot.
m Ejection Guide
Supports output paper.
n
Top Cover
Open this cover to install the Printhead and remove any jammed paper from inside the printer, as needed.
(See "Top Cover (Inside).") ➔P.56
o
Width Guide
When loading the sheets , move the guide to match the paper size.
p
Stand
A stand that holds the printer. Equipped with casters to facilitate moving it. (See "Stand.") ➔User's Guide
Note
• The Stand that can be used with this printer is Printer Stand ST-34 and Printer Stand ST-33. Either one or the
other of these Stand is included with the printer depending on the region and time when you purchased the printer.
• The output stacker of the Printer Stand ST-33 has a regular position and an Extended position A.
For details on the extended position, see "Using the Output Stacker." ➔ User's Guide
• The Stand is described in the illustration of Printer Stand ST-34. Note that the illustrations may look different from
the appearance of your printer in some cases.
Side
Side
e
d
d
d
c
b
a
iPF770 Series
Side
Basic Guide
Printer Parts Printer parts
55