Basic Guide

Important

•

Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect the

printing quality. We recommend wearing clean cloth gloves when handling rolls to protect the printing

surface.

•

If the paper is wrinkled or warped, straighten it out before loading it.

•

Load paper straight so it is not fed askew.

Once paper feeding starts, you will need to do the following, based on the ManageRemainRoll setting and

the barcode printed on rolls. (See "Keeping Track of the Amount of Roll Paper Left.")

➔User's Guide

ManageR-

emainRoll

Barcodes Printer Operation After the Paper is Fed

Off Printed A menu for selection of the type of paper is automatically shown on the Display Screen.

Press ▲ or ▼ to select the type of paper, and then press the OK button.

Not prin-

ted

On Printed The type and amount of paper left is automatically detected based on the barcode printed on the roll.

There is no need to specify the type and length of the paper.

Not prin-

ted

A menu for selection of the paper type and length is automatically shown on the Display Screen.

Press ▲ or ▼ to select the type and length of paper loaded, and then press the OK button.

Note

•

For details on types of paper to select, see the Paper Reference Guide. (See "Displaying the Paper

Reference Guide.") ➔User's Guide

Holding it at the positions indicated, close the Roll

Cover.

Note

•

Cut the edge of the roll after the paper is advanced if it is soiled or if there are cuts from scissors or the

blade after removing creased edges. (See "Specifying the Cutting Method for Rolls.") ➔ User's Guide

Removing the Roll from the Printer

Remove rolls from the printer as follows.

Note

•

If you need to cut the roll, see "Specifying the Cutting Method for Rolls." ➔User's Guide

iPF770 Series

Removing the Roll from the Printer

Basic Guide

Handling Paper Handling rolls