User's Manual
Printing procedure
Loading and Printing on Rolls
These are the basic steps for loading and printing on rolls.
Follow the steps below to switch to a new roll or a roll of a dif ferent type or width before printing.
Note
• Before printing banners or other long documents, spread a clean cloth or paper on the oor . Otherwise
use the optional Output Stacker .
Otherwise, long sheets that touch the oor after printing may become dirty .
• If you prefer to wait for the ink to dry after printing and simply eject the document, you can deactivate
automatic cutting and cut the paper manually . ( → P .124)
1. T urn the printer on. ( → P .22)
2. Select a roll as the paper source. ( → P .104)
3. Set a roll on the Roll Holder . ( → P .107)
Basic Printing W orkow 77