User's Manual
Control Panel
GL2 Settings
Setting Item Description, Instructions
GL2 Replot Print the last printed job (still stored in the printer memory)
again.
GL2 BufferClear Delete the last job printed using HP-GL/2, still stored in the
printer memory .
Color Mode Monochrome Print in monochrome.
Color (CAD) 1 Print in standard colors.
Color (CAD) 2 Print in brighter colors.
Print Quality Choose the print quality .
Input Resolution Choose the printer input resolution, 600dpi or 300dpi .
Media Source Choose the media source for HP-GL/2 printing.
Conserve Paper Conserves paper when printing.
Line Cap Choose the shape of the end point, determined by
Software or Rounded .
• If you choose Software
Operation is determined by the application. If nothing
is specied by the application, the result is as shown
in the gure.
• If you choose Rounded
Smoothing Choose whether to print arcs as smooth curved lines or as
multiple connected line segments.
• If you choose Software
Operation is determined by the application. If nothing
is specied by the application, the result is as shown
in the gure.
Note: By default, this is a 72-sided gure
• If you choose Smooth
Line W idth Choose the width for printing lines if no width is specied in
the data. Dots in the line width are 300 dpi each.
52 Printer Parts