User's Manual
Responding to Messages
Error Messages
W arning messages
W arning messages are shown on lines 2-4 of the Display Screen .
Although warning messages do not prevent printer operation, you should check the message and take
the appropriate action.
• GARO Wxxxx (x represents a number) (→P .645)
• GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904) (→P .644)
• GL2: W0502 The parameter is out of range. (→P .644)
• GL2: W0504 This command is not supported. (→P .644)
• Ink Level: Check (→P .639)
• End of paper feed. (→P .636)
• This type of paper is not compatible with HP-GL/2. (→P .644)
• Prepare for parts replacement. (→P .646)
• Parts replacement time has passed. (→P .646)
• Problem with Printhead (→P .641)
• Prepare for maint cart replacement. (→P .643)
• Paper Mismatch (→P .631)
• Papr Size Mismatch (→P .631)
• Papr T ype Mismatch (→P .631)
Error messages (if action can be taken)
Check the message and take the appropriate action.
• No ink left. (→P .638)
• Ink insuf cient. (→P .638)
• No ink tank loaded. (→P .639)
• Ink tank error . (→P .639)
• T op cover is open. (→P .645)
• Sheet printing is selected. (→P .634)
• Regular printing is selected, but a roll is loaded. (→P .634)
• No sheets. (→P .634)
• Carriage Cover is open. (→P .646)
• Cannot feed paper . (→P .634)
• Insuf cient paper for job (→P .632)
• This type of paper is not compatible with HP-GL/2. (→P .644)
• Use another paper . (→P .640)
• This paper cannot be used. (→P .632)
• Cannot print as specied. (→P .640)
• Cannot adjust band. (→P .640)
• Unknown le. (→P .646)
• Borderless printng not possible. (→P .637)
• Printhead error (→P .642)
• PHead needs cleaning. (→P .641)
• Cannot adjust printhead. (→P .640)
• Multi-sensor error (→P .646)
• Maintenance cartridge problem. (→P .643)
• Maintenance cartridge full. (→P .643)
• No maintenance cartridge. (→P .643)
Error Message 629