Manualshelf

User's Manual

ManualsBrandsCanon ManualsComputer equipmentimagePROGRAF iPF710 with Colortrac Scanning System
611612613614615616617618619620
Problems Regarding Paper
7. Pull the roll edge gently and align it with the Paper Alignment Line (a). Lower the Release
Lever toward the front.
Important
• Do not force the roll paper into alignment with the Paper Alignment Line (a). This may prevent the
paper from being advanced straight.
• The amount of paper pulled from the roll corresponds to the margin of the leading edge.
8. Close the T op Cover .
9. T urn the printer on. ( → P .22)
The roll is now advanced. After it is nished being advanced, you can resume printing.
Note
• Y ou can ensure that the edge is cut neatly by following the steps below .
1. Press the Online button to bring the printer of ine.
2. Hold down the ▼ button to advance the paper .
3. Set Paper Cutting to Y es in the printer menu, and the edge will be cut.
T roubleshooting 603