User's Manual

Handling rolls
5. Holding the paper on both sides, pull the jammed portion out toward the front. Use a scissors
to cut away the printed or wrinkled portion.
Caution
• When cutting paper , be careful to avoid injury and damaging the printer .
6. If the Carriage is on the left, move the Carriage to the right until it stops.
Important
• Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may
occur when you turn on the printer .
7. Pull the roll edge gently and align it with the Paper Alignment Line (a). Lower the Release
Lever toward the front.
Important
• Do not force the roll paper into alignment with the Paper Alignment Line (a). This may prevent the
paper from being advanced straight.
• The amount of paper pulled from the roll corresponds to the margin of the leading edge.
Handling Paper 1 17