User's Manual

Handling rolls
Loading Rolls in the Roll Holder Slot
Once a roll is in the Roll Holder , follow these steps to load the roll in the Roll Holder Slot .
Holding the Roll Holder so that the side with the white gear faces the side of the Roll Holder Slot with a white
gear , load the Roll Holder shaft (a) into the grooves (b) on both ends of the Roll Holder Slot .
Caution
• Be careful not to drop the roll and hurt yourself when loading it.
• Be careful not to pinch your ngers between the Roll Holder shaft (a) and the guide grooves (b) when
loading rolls.
At this point, to advance the roll, see “Loading the Roll in the Printer”. (→P .1 10)
Handling Paper 109