User's Manual

Handling rolls
2. With the edge of the roll paper facing back as shown, set the roll with the Roll Holder from the
right. Insert the roll rmly until it touches the ange (a) of the Roll Holder .
Important
• When loading a roll, be careful to avoid hitting the printer hard with the roll. This may damage
the Roll Holder .
3. Insert the Holder Stopper from the right in the Roll Holder as shown. Holding it at the position
indicated (b), push it rmly in until the ange (a) of the Holder Stopper touches the roll. Lock the
Holder Stopper lever (c) by pushing it down toward the shaft side.
108 Handling Paper