Lar g e F o r m a t P r i n t e r User Manual ENG
Contents Contents Introduction 1 How to use this manual.....................................................................................1 About This User Manual...............................................................................................................1 Searching Topics..........................................................................................................................3 HTML Version of the Manual for Printing.....................................................
Contents Printing from Mac OS 9..............................................................................................................87 Canceling print jobs.........................................................................................89 Canceling Print Jobs from the Control Panel.............................................................................89 Canceling Print Jobs from Windows...........................................................................................
Contents Printing Photos and Images (Mac OS X).................................................................................150 Printing Photos and Images (Mac OS 9)..................................................................................153 Printing CAD Drawings..................................................................................156 Printing CAD Drawings.............................................................................................................
Contents Resizing Originals to Fit the Roll Width (Mac OS 9).................................................................226 Resizing Originals by Entering a Scaling Value.......................................................................229 Resizing Originals by Entering a Scaling Value (Windows).....................................................230 Resizing Originals by Entering a Scaling Value (Mac OS X)....................................................
Contents Printing Multiple Pages Continuously (Mac OS 9)...................................................................326 Printing Multiple Pages Per Sheet............................................................................................328 Printing Multiple Pages Per Sheet (Windows)..........................................................................329 Printing Multiple Pages Per Sheet (Mac OS X)........................................................................
Contents Windows Software 407 Printer Driver..................................................................................................407 Printer Driver Settings (Windows)............................................................................................407 Specifying Paper in the Printer Driver (Windows)....................................................................409 Confirming Print Settings (Windows)...............................................................................
Contents Accessing the Printer Driver Dialog Box from Applications (Mac OS X)..................................460 Main Pane (Mac OS X)............................................................................................................461 Paper Information on Printer Dialog Box (Mac OS X)..............................................................463 Media Detailed Settings Dialog Box (Mac OS X).....................................................................
Contents Specifying Printer-Related Information.....................................................................................513 Configuring the Communication Mode Manually......................................................................514 Email Notification When Printing is Finished or Errors Occur..................................................515 Initializing the Network Settings...............................................................................................
Contents Replacing the Printhead...........................................................................................................569 Cutter Unit......................................................................................................576 Cutter Unit................................................................................................................................576 Replacing the Cutter Unit...................................................................................
Contents Printed colors are inaccurate....................................................................................................612 Banding in different colors occurs............................................................................................613 Colors in printed images are uneven........................................................................................614 Image Edges are Blurred or White Banding Occurs................................................................
Contents This paper cannot be used.......................................................................................................632 Roll printing is selected............................................................................................................633 Roll printing is selected, but sheets are loaded........................................................................633 The roll is empty.............................................................................................
Contents GL2: W0504 This command is not supported..........................................................................644 Other Messages............................................................................................645 GARO Wxxxx (x represents a number)....................................................................................645 ERROR Exxx-xxxx (x represents a letter or number)...............................................................645 Hardware error.
How to use this manual Introduction How to use this manual About This User Manual • Symbols The following symbols are used in this User Manual to indicate safety information and explanations on restrictions or precautions in use. Important Indicates important information that must be followed when using the printer. Be sure to read this information to prevent printer damage or operating errors.
How to use this manual • Figures and software screens • Figures in this User Manual may be different from the actual appearance of the printer in some cases. • Screens depicted in this User Manual for the printer driver or other software may be different from the actual screens because of subsequent updates. • Windows XP screens are used in explanations of Windows operations in this User Manual. • Trademarks • Canon, the Canon logo, and imagePROGRAF are trademarks or registered trademarks of Canon Inc.
How to use this manual Searching Topics You can nd information in topics of this User Manual by searching for relevant terms. 1. Enter a term and click the Search button. Note • To search for multiple terms at once, enter a space between each term. Search results are listed at left.
How to use this manual 2. Click a topic you want to read. The terms you searched for will be highlighted in the topic. To review multiple topics at once, select the check box of desired topics and click the Apply button.
How to use this manual HTML Version of the Manual for Printing You can select a group of topics in the table of contents or individual topics in this manual for printing. The following procedure describes how to do this, using the information in Basic Printing Workow as an example. Printing a group of topics in the manual When you access printable HTML versions of the content from section titles in the table of contents, you can specify a group of topics to print. 1.
How to use this manual 2. Click Access to the HTML for printing in the title area. The topics in Basic Printing Workow are displayed together in HTML format, ready for printing.
How to use this manual 3. Clear the sections you will not print and click the Apply button. Printing a group of individual topics in the manual When you access printable HTML versions from subtitles in the table of contents, you can specify a group of topics to print. 1. Click a section title in the table of contents. Here, Basic Printing Workow is used as an example.
How to use this manual 2. Under Basic Printing Workow, click Printing Procedure. 3. Click Access to the HTML for printing in the title area.
How to use this manual The topics in Printing Procedure are displayed together in HTML format, ready for printing. 4. Clear the topics you will not print and click the Apply button.
How to use this manual Printing selected topics Print selected topics as follows. 1. Access the printing dialog box as follows, depending on your computer’s operating system. • Windows In Windows, right-click anywhere in the explanation area except on a gure or a link.In the shortcut menu, click Print to display the Print dialog box.
How to use this manual • Macintosh On a Macintosh computer, click anywhere in the explanation area except on a gure or a link while holding the Ctrl key. In the shortcut menu, click Print Frame to display the Print dialog box. 2. Specify conditions as needed, and then click Print (Windows) or Print (Macintosh).
How to use this manual • Macintosh Note • To print only individual topics that are displayed, use this method.
Printer parts Printer Parts Printer parts Front a. Top Cover Open this cover to install the Printhead, load paper, and remove any jammed paper from inside the printer as needed. (→P.15) b. Ejection Guide Supports paper as it is ejected to prevent it from rising. c. Maintenance Cartridge Ink used for maintenance purposes such as head cleaning is absorbed. (Replace the cartridge when it is full.) d. Maintenance Cartridge Cover Open this cover to replace the Maintenance Cartridge. e.
Printer parts Back a. Release Lever Releases the Paper Retainer. Push this release lever back before loading paper or cleaning inside the printer. b. Carrying Handles (Four Positions) When carrying the printer, hold it by these handles under both sides. c. Power Supply Connector Connect the power cord to this connector. d. Roll Holder Slot Slide the Roll Holder into this guide slot. e. Holder Stopper Secure the roll on the Roll Holder with this part. f. Roll Holder Load the roll on this holder. g.
Printer parts Top Cover (Inside) a. Top Cover Roller Prevents paper from rising when ejected. b. Paper Alignment Line Align paper with this line when loading it. c. Carriage Moves the Printhead. The carriage serves a key role in printing. (→P.16) d. Carriage Shaft The Carriage slides along this shaft. e. Paper Retainer Important in supplying the paper. This retainer holds paper as it is fed. f. Platen The Printhead moves across the platen to print. The Vacuum holes on the platen hold paper in place.
Printer parts Carriage a. Carriage Cover Protects the Carriage. b. Printhead Fixer Cover Holds the Printhead in place. c. Printhead The printhead is equipped with ink nozzles. It is a key part of the printer. d. Printhead Fixer Lever Locks the Printhead Fixer Cover. e. Shaft Cleaner Prevents the Carriage Shaft from becoming dirty. f. Angle Adjustment Lever Use this lever to ne-tune the printer to correct misalignment of printed lines. g.
Printer parts Ink Tank Cover (Inside) a. Ink Tank Cartridges of ink in various colors. b. Ink Tank Lock Lever A lever that locks the Ink Tank in place and protects it. Open or close the lever when replacing an Ink Tank. c. Ink Lamp (Red) Indicates the state of the Ink Tank as follows when the Ink Tank Cover is opened. • On On: The Ink Tank is installed correctly. • Off Off: No Ink Tank is installed, or the ink level detection function is disabled. • Flashing Slowly Not much ink is left.
Printer parts Control Panel a. Online Button (Green) Switches the printer online and ofine. (→P.29) • On The printer is online. • Flashing The printer is switching modes. • Off The printer is ofine. b. Menu Button Displays the main menu of the printer. (→P.48) c. Data lamp (Green) • Flashing During printing, the Data lamp ashes when the printer is receiving or processing print jobs. This lamp ashes when the print job is paused or the printer is updating the rmware.
Printer parts g. Display Screen Shows the printer menu, as well as the printer status and messages. h. Color Labels These labels indicate the Ink Tank colors. The labels correspond to the ink levels on the Display Screen. i. ◄ Button Menu mode: Press this button to display the menu one level higher. j. ▲ Button Ofine mode: Press this button to rewind the roll manually. (→P.119) Menu mode: Press this button to display the previous menu item or setting value. k.
Control Panel Control Panel Control Panel a. Online Button (Green) Switches the printer online and ofine. (→P.29) • On The printer is online. • Flashing The printer is switching modes. • Off The printer is ofine. b. Menu Button Displays the main menu of the printer. (→P.48) c. Data lamp (Green) • Flashing During printing, the Data lamp ashes when the printer is receiving or processing print jobs. This lamp ashes when the print job is paused or the printer is updating the rmware.
Control Panel f. Feeder Selection Button Switches the paper source. Each time you press this button, the paper source switches between the roll and the sheet, and the corresponding lamp on the Paper Source Section is lit. g. Display Screen Shows the printer menu, as well as the printer status and messages. h. Color Labels These labels indicate the Ink Tank colors. The labels correspond to the ink levels on the Display Screen. i. ◄ Button Menu mode: Press this button to display the menu one level higher.
Control Panel Turning the Printer On and Off Turning the printer on 1. Press the Power button to turn on the printer. The printer will now start up. After the Display Screen shows the Canon logo, Starting up... Please wait. is displayed. 2. The printer goes online in preparation for printing after startup, and the Online lamp and paper source section lamp remain lit. The printer will not go online in the following situations. Take action as needed. • The Top Cover is open Close the Top Cover.
Control Panel Turning the printer off Important • Never turn the printer off or unplug it during a print job. This could damage the printer. 1. Make sure no print jobs are in progress. If the Message lamp is ashing, check the message on the Display Screen and take action as necessary. (→P.629) If the Data lamp is ashing, the printer is receiving a print job. Turn off the printer only after printing is nished. 2. Hold down the Power button for more than a second. After Shut Down.. Please Wait..
Control Panel Printer Modes Printer modes are classied as follows and described in this topic. • • • • • • Modes (→P.24) Mode transition (→P.25) Online, and state of the Control Panel (→P.26) Ofine, and state of the Control Panel (→P.27) Menu mode, and state of the Control Panel (→P.28) Submenu mode, and state of the Control Panel (→P.28) Modes The printer has ve modes as follows: • Online The printer is ready to receive jobs sent from the computer.
Control Panel Mode transition The printer mode transitions are as follows: *1: When submenus are displayed, you can press any button other than the Information button to return to the previous mode. *2: The printer automatically enters Sleep mode if it is idle for a specic period (by factory default, ve minutes), that is, if no print jobs are received or buttons are pressed while all covers are closed. However, it does not enter Sleep mode while error messages are displayed.
Control Panel Online, and state of the Control Panel Not printing Printing in progress (receiving or processing print jobs) Display Screen • Top Level of the Display Screen The printer status is displayed here. The selected paper source is indicated by an icon in the upper-right corner. Any warning messages are displayed here on lines 2-4. Take action as needed. (→P.629) • Middle Level of the Display Screen The rst and second lines display the paper type and size.
Control Panel Ofine, and state of the Control Panel Ofine Not printing Printing is paused Display Screen • Top Level of the Display Screen The printer status is displayed here. The selected paper source is indicated by an icon in the upper-right corner. Any warning messages are displayed here on lines 2-4. Take action as needed. (→P.629) • Middle Level of the Display Screen The rst and second lines display the paper type and size.
Control Panel Menu mode, and state of the Control Panel Main menu • Display Screen Menu items and settings • Display Screen Pressing the Menu button when printing is not in progress displays the main menu. The title of the selected menu is displayed on the rst line, and menus immediately under the current menu are displayed on the second and subsequent lines. The lower level menus are available if “►” is displayed at right. (→P.
Control Panel Switching Modes Switching the printer online/ofine Press the Online button to switch the printer online or ofine. The Online lamp is lit in Online mode. Printing is possible in this mode. The Online lamp is off in Ofine mode. Depending on the status, the printer switches online and ofine as follows. Printer Status When the Online Button is Pressed Online The printer switches ofine and the Online lamp goes off. Online, printing Switches ofine and printing is paused.
Control Panel Switching to Menu mode Press the Menu button to display the main menu. Depending on the status, the printer switches to Menu mode as follows. Printer Status When the Menu Button is Pressed Online Switches to Menu mode. Online, printing The printer stays online. It does not switch to Menu mode. Ofine Switches to Menu mode. Ofine, printing Menus available during printing are displayed.
Control Panel Printer Menu Operations The printer menu includes a main menu and submenus. • Main menu operations when no print job is in progress (→P.31) • Main menu operations during printing (→P.31) • Submenu operations (→P.32) Main menu operations when no print job is in progress Access the main menu by pressing the Menu button on the Control Panel. Note • The main menu will not be displayed in the following case even if you press the Menu button.
Control Panel Submenu operations Access submenus by pressing the Information button on the Control Panel. You can check the following information in submenus. • • • • Remaining Maintenance Cartridge capacity Ink levels Information on the loaded paper Printer information For a description of specic items displayed in submenus, see “Submenu Display”. (→P.
Control Panel Main Menu Operations Press the Menu button to display the main menu. For details, see “Main Menu Settings”. (→P.48) • Main menu when no print job is in progress • Main menu during printing Note • The main menu will not be displayed in the following cases even if you press the Menu button. • An error message is displayed You can access the Menu mode after you have solved the problem.
Control Panel Accessing Menus Printer menus are grouped by function. Menus are displayed with the upper line selected. Use the buttons on the Control Panel to access each menu. • Press ▲ to access a higher menu in the menu list, and press ▼ to access a lower one. If items of the menu list are more than the lines of the screen, press ▲ and ▼ to scroll the menu. If you navigate to the lowest-level menu and press the ▼ button again, the display switches to the top-level menu screen.
Control Panel Specifying menu items Follow the steps below to specify menu items. 1. Press ▲ or ▼ to select a menu, and then press the ► button. Repeat these steps until the desired menu options are displayed. 2. Press ▲ or ▼ to select the desired setting, and then press the OK button. The check box at left is selected, and the setting is conrmed. After two seconds, the display reverts to the upper level menu. 3. Press the Online button to bring the printer online.
Control Panel Specifying numerical values Follow the steps below to enter numbers for items such as network settings. 1. 2. 3. 4. 5. Press ▲ or ▼ to select Interface Setup, and then press the ► button. 6. Press ▲ or ▼ to select the number, and then press the OK button. Press ▲ or ▼ to select TCP/IP, and then press the ► button. Press ▲ or ▼ to select IP Setting, and then press the ► button. Press ▲ or ▼ to select IP Address, and then press the ► button.
Control Panel Menu Structure Main Menu The structure of the main menu is as follows. Values at right indicated by an asterisk “*” are the defaults. For instructions on menu operations, see “Main Menu Operations”. (→P.33) For details on menu items, see “Main Menu Settings”. (→P.48) First Level Paper Cutting Third Level Second Level Fourth Level Fifth Level No * Yes Rep. Ink Tank No * Yes Head Cleaning Head Cleaning A * Head Cleaning B Media Menu Cut Sheet Type (The paper type is displayed here.
Control Panel First Level Second Level Third Level Feed Priority Fourth Level Automatic * Band Joint Print Length Adjust Length From -0.70% to 0.70% Head Height Automatic * Highest High Standard Low Lowest Skew Check Lv.
Control Panel First Level Third Level Second Level Fourth Level Fifth Level On NearEnd Sht Mrgn 3mm 20mm Return Defaults No Yes GL2 Settings GL2 Replot No Yes GL2 BufferClear No Yes Color Mode Monochrome Color (CAD) 1 * Color (CAD) 2 Print Quality Fast Standard * High Input Resolution 600dpi * 300dpi Media Source Automatic * Roll Paper Cut Sheet Conserve Paper Off * On Line Cap Software * Rounded Smoothing Software * Smooth Line Width 1 dot 2 dots 3 dots 4 dots * 5 dots 6 dots 7 d
Control Panel First Level Third Level Second Level AdjustFaintLines Fourth Level Fifth Level Off On * Auto Rotate Off * On Adjust Printer Auto Head Adj. Standard Adj. No Yes Advanced Adj. No Yes Auto Print Off On * Manual Head Adj No Yes Auto Band Adj. Standard Adj. No Yes Advanced Adj. No Yes Manual Band Adj No Yes Adjust Length (*3) No Yes Head Inc. Adj. No Yes Interface Setup EOP Timer 10 sec. 30 sec. 1 min. 2 min. 5 min. 10 min. * 30 min. 60 min.
Control Panel First Level Third Level Second Level Fourth Level Fifth Level Off * RARP On Off * IP Setting NetWare NetWare IP Address 0. 0. 0. 0 - 255. 255. 255. 255 Subnet Mask 0. 0. 0. 0 - 255. 255. 255. 255 Default G/W 0. 0. 0. 0 - 255. 255. 255. 255 On Off * Frame Type (*6) Auto Detect Ethernet 2 Ethernet 802.2 * Ethernet 802.3 Ethernet SNAP Print Service (*6) BinderyPServer RPrinter NDSPServer * NPrinter AppleTalk On Off * Ethernet Driver Auto Detect On * Off Comm.
Control Panel First Level Third Level Second Level Fourth Level Yes Replace P.head No Yes Repl. S. Cleaner No * Yes Change Cutter No * Yes Move Printer No * Yes System Setup Warning Buzzer Off On * Detect Mismatch Pause Warning None * Keep Media Size Off * On Paper Size Basis Sht Selection 1 ISO A3+ * 13"x19"(Super B) Sht Selection 2 ISO B1 28"x40" (ANSI F) Noz. Check Freq. Off 1 page 10 pages Automatic * Sleep Timer 5 min. * 10 min. 15 min. 20 min. 30 min. 40 min. 50 min.
Control Panel First Level Third Level Second Level Time Zone Fourth Level Fifth Level 0:London (GMT) +1:Paris,Rome +2:Athens,Cairo +3:Moscow +4:Eerevan,Baku +5:Islamabad +6:Dacca +7:Bangkok +8:Hong Kong +9:Tokyo,Seoul +10:Canberra +11NewCaledonia +12:Wellington -12:Eniwetok -11:Midway is.
Control Panel First Level Third Level Second Level Contrast Adj. Fourth Level -4, -3, -2, -1, 0*, +1, +2, +3, +4 Reset PaprSetngs No Yes Test Print Status Print No Yes Media Details No Yes Print Job Log No Yes Menu Map No Yes Nozzle Check No Yes Information System Info Error Log ########-#### Job Log (Choose from Document Name information about the latest three print jobs.
Control Panel First Level Second Level Third Level Fourth Level Fifth Level Media Type Interface Ink Consumed *1: *2: *3: *4: *5: Available only if a roll is loaded. Available only if Chk Remain.Roll is On. Available only if Feed Priority is Print Length. Available only if IP Mode is Automatic. For information on the types of paper the printer supports, refer to the Paper Reference Guide. (→P.
Control Panel Submenus Each time you press the Information button on the Control Panel, printer information is displayed in the following order. ■The remaining Maintenance Cartridge capacity and ink levels ■Information of the loaded paper ■Printer information ■HP-GL/2 settings information For details on submenu screens, see “Submenu Display”. (→P.
Control Panel Main menu during printing The structure of the main menu during printing is as follows. For instructions on menu operations, see “Main Menu Operations”. (→P.33) For details on menu items, see “Main Menu Settings (During Printing)”. (→P.59) First Level Second Level Menu Durng Prtng Head Cleaning Third Level Fourth Level Fifth Level Head Cleaning A * Head Cleaning B Fine Band Adj.
Control Panel Main Menu Settings Main menu items are described in the following tables. For instructions on selecting or setting menu items, see “Main Menu Operations”.. (→P.33) For details on menu levels and values, see “Menu Structure”. (→P.37) Setting Item Description, Instructions Paper Cutting This command is available only if a roll is loaded. Choose Yes to cut the roll at the current position. However, if paper cannot be advanced to the cut position, it will not be cut.
Control Panel Media Menu Setting Item Description, Instructions Cut Sheet Type (*1) Choose the type of sheets. (→P.134) Roll Media Type (*1) Choose the type of roll. (→P.105) Chk Remain.Roll Choose On to print a barcode at the end of a roll before you remove it. The printed barcode can be used in managing the amount of roll paper left. Choose Off if you prefer not to print the barcode. Roll Length Set Displayed if Chk Remain.Roll is On.
Control Panel Paper Details Setting Item (The paper type is displayed here.)(*1) 50 Printer Parts Description, Instructions Roll DryingTime Specify the time to wait for the ink to dry for each sheet. Scan Wait Time Specify the time to wait for the ink to dry between each scan in bidirectional printing, in consideration of how quickly the ink dries. Note that printing will take longer if you specify a wait time. Feed Priority Specify exact paper feeding, if desired. Normally, select Automatic.
Control Panel Setting Item (The paper type is displayed here.)(*1) Description, Instructions Cutting Mode Specify whether or not to cut with the standard round-bladed cutter. Choose Automatic to have the roll cut automatically after printing. If you choose Manual, the paper will not be cut after printing. Instead, a line will be printed at the cut position. Choose Eject if you prefer not to have documents dropped immediately after printing, as when waiting for ink to dry.
Control Panel GL2 Settings Setting Item Description, Instructions GL2 Replot Print the last printed job (still stored in the printer memory) again. GL2 BufferClear Delete the last job printed using HP-GL/2, still stored in the printer memory. Color Mode Monochrome Print in monochrome. Color (CAD) 1 Print in standard colors. Color (CAD) 2 Print in brighter colors. Print Quality Choose the print quality. Input Resolution Choose the printer input resolution, 600dpi or 300dpi.
Control Panel Setting Item Description, Instructions ThickenFineLines Select On to print ne lines more distinctly. AdjustFaintLines If ne lines are printed in colors that do not match the colors of other shapes, selecting Off may help produce the expected results. However, lines in some colors may appear broken. Auto Rotate If the long side of an original is shorter than the roll width, the original is automatically rotated 90 degrees to conserve paper.
Control Panel Adjust Printer Setting Item Auto Head Adj. Standard Adj. Choose Yes to have the printer print and read a test pattern for the automatic adjustment of Printhead alignment relative to the printing direction. (→P.542) Advanced Adj. Choose Yes to have the printer print and read a test pattern for the automatic adjustment of Printhead alignment relative to the nozzle, ink tank, and printing direction. (→P.542) Auto Print Choose On to have the printer automatically execute the Advanced Adj.
Control Panel Interface Setup Setting Item Description, Instructions EOP Timer TCP/IP Specify the timeout period before cancellation of print jobs that cannot be received by the printer. IP Mode Protocol Choose whether the printer IP address is congured automatically or a static IP address is entered manually. DHCP BOOTP Specify the protocol used to congure the IP address automatically.
Control Panel Maintenance Setting Item Description, Instructions Repl. maint cart When replacing the Maintenance Cartridge, choose Yes and follow the instructions on the screen. (→P.579) Replace P.head Not displayed during a warning message that the remaining Maintenance Cartridge capacity is low. When replacing the Printhead, choose Yes and follow the instructions on the screen. (→P.569) Repl. S. Cleaner When replacing the Shaft Cleaner, choose Yes and follow the instructions on the screen. (→P.
Control Panel Setting Item Sht Selection 2 Description, Instructions If sheet size detection is activated, choose whether ISO B1 or 28"x40" (ANSI F) is applied when an intermediate size is detected. Noz. Check Freq. Specify the timing for automatic checks of nozzle clogging. Choose 1 page to check once per printed page. Choose 10 pages to check once per ten printed pages. Choose Automatic to have the printer automatically adjust the timing for checks based on the frequency of nozzle use.
Control Panel Information Setting Item System Info Version Firm Description, Instructions Displays the printer rmware version. Boot Displays the version of the boot ROM. MIT Displays the version of the MIT database format. s/n Displays the printer’s serial number. MAC Displays the MAC address of the printer. IP Displays the printer’s IP address. Error Log ########-#### Displays the most recent error messages (up to two).
Control Panel Main Menu Settings (During Printing) Main menu items during printing are described in the following tables. For instructions on menu operations, see “Main Menu Operations”. (→P.33) For details on menu levels and values, see “Menu Structure”. (→P.37) Setting Item Description, Instructions Head Cleaning Specify Printhead cleaning options. (→P.568) Choose Head Cleaning A if printing is faint, oddly colored, or contains foreign substances.
Control Panel Submenu Display Press the Information button to display this information, one after another: the Maintenance Cartridge capacity and remaining ink levels, paper information, and printer information. Each time you press the Information button, the following submenus are displayed. Note • Press any button other than the Information button to restore the previous mode.
Control Panel GL2 Settings The following settings information is displayed on two screens: HP-GL/2 Color Mode, Print Quality, Input Resolution, Media Source, Conserve Paper, Line Cap, Smoothing, and Line Width.
Control Panel Status Print You can print a Status Print report indicating the current status of the printer. With Status Print, information is printed regarding the printer rmware version, various settings, and the utilization level of consumables. Printing Status Print Reports 1. Load paper. If using sheets, load paper A4/Letter-sized. You will need at least four sheets. 2. Press the Menu button to display MAIN MENU. 3. 4. 5. Press ▲ or ▼ to select Test Print, and then press the ► button.
Control Panel HP-GL/2 Settings HP-GL/2 setting values. Color Mode Print Quality Input Resolution Media Source Conserve Paper Line Cap Smoothing Line Width ThickenFineLines AdjustFaintLines Auto Rotate Interface Setup Current network settings. EOP Timer Sets the elapsed time between receiving last data and canceling printing. TCP/IP Settings related to TCP/IP. IP Mode Protocol DHCP BOOTP RARP IP Setting IP Setting values. IP Address Subnet Mask Default G/W NetWare NetWare settings.
Control Panel System Setup Warning Current warning and error settings. Buzzer Detect mismatch Keep Media Size Current paper-related settings. Sheet Selection 1 Sheet Selection 2 Noz. Check Freq. Nozzle-check settings. Sleep Timer General printer settings. Length Unit Time Zone Date Format Language Contrast Adj. Information RAM Error Log 64 Printer Parts System information and an error log.
Control Panel Network (RemoteUI) Current network settings used by RemoteUI.
Control Panel Bindery PServer File Server Name* Values set when NetWare > Print Service > Bindery PServer is selected. Print Server Name* Print Server Password* Polling Interval RPrinter Values set when NetWare > Print Service > RPrinter is selected. Print Server Name* Printer Number* NDS PServer Values set when NetWare > Print Service > NDS PServer is selected. Tree Name* Context name* Print Server Name* Print Server Password* NPrinter Values set when NetWare > Print Service > NPrinter is selected.
Control Panel COUNTER Utilization status of the cutter, media, and other items (indicating how much they have been used).
Optional accessories Optional accessories Roll Holder Set A set of parts comprising the Roll Holder, Holder Stopper, 2-Inch Paper Core Attachment, and 3-Inch Paper Core Attachment. To load a roll with a 3-inch paper core, remove the 2-Inch Paper Core Attachment from the Holder Stopper and then attach the 3-Inch Paper Core Attachment on both the Roll Holder and Holder Stopper.
Optional accessories IEEE 1394 (FireWire) Expansion Board An interface board to add an IEEE 1394 (also called "FireWire") port. • IEEE1394 Expansion Board EB-05 Caution • Note that EB-04 is incompatible. For instructions on installing the IEEE 1394 expansion board, refer to the documentation provided with the optional IEEE 1394 expansion board.
Printer Specications Printer Specications Specications Important • This information is subject to change as the printer is updated. • The following values may vary depending on the operating environment. Printer Power supply Power consumption Operating noise 100-120 V AC (50/60 Hz), 220-240 V AC (50/60 Hz) During operation 140 W max. Sleep mode 100-120 V: 5 W max. (10 W max. when an IEEE 1394 (FireWire) expansion board is installed.) 220-240 V: 6 W max. (11 W max.
Printer Specications Interface Expansion Board Slots USB 2.0(*1) Ethernet IEEE 1394 1 Format Internal port Mode Full-speed (12 Mbps), high-speed (480 Mbps) Connector Series B (4-pin) Format Internal port Specication IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX /Auto-Negotiation, IEEE 802.3x Full Duplex Protocols IPX/SPX (Netware 4.2, 5.1, 6.
Printer Specications Paper (*1) Paper width 203-917 mm (8-36.1 in) Maximum length per page Rolls 18 m (19.9 yd) Sheets 1.6 m (1.7 yd) Thickness Rolls 0.07-0.8 mm (8-36.1 in) Sheets 0.07-0.8 mm (0.0028-0.
Printer Specications Basic Environmental Performance Printer Power consumption Resource efciency Product safety Sleep mode 100-120 V: 5 W max. (10 W max. when an IEEE 1394 (FireWire) expansion board is installed.) 220-240 V: 6 W max. (11 W max. when an IEEE 1394 (FireWire) expansion board is installed.) Off 1 W max. Weight Printer and Stand : 62.4kg (136.7 lb) Dimensions (W × D × H) Printer and Stand : 1,507 × 871 × 1,094 mm (59.3 × 34.3 × 43.
Printer Specications Print Area A margin required by the printer is added with respect to the size of paper loaded in the printer. Except in borderless printing, the actual printing area corresponds to the paper size minus the space for this margin. Top Edge Printable Area Bottom Edge Sides Recommended Print Area Top Edge Bottom Edge Sides Sheets 3 mm (0.12 in) 23 mm (0.91 in) 3 mm (0.12 in) 20 mm (0.79 in) 23 mm (0.91 5 mm (0.20 in) in) Rolls 0/3 mm (0/0.12 in) 0/3 mm (0/0.
Printing procedure Basic Printing Workow Printing procedure Printing Options Using Rolls and Sheets The printer supports both rolls and sheets. This section introduces the main features of each, as well as the main printing methods available. Select rolls or sheets to suit your particular printing application. Note • For information on the types of paper the printer supports, refer to the Paper Reference Guide. (→P.95) • A variety of other ways to print are available besides those introduced here.
Printing procedure Sheet printing Sheets refers to individual sheets of paper in regular sizes. Insert the sheet between the Platen and the Paper Retainer. • Enlarged/reduced printing You can freely adjust the size of originals by enlarging or reducing originals before printing. (→P.211) (→P.220) (→P.229) • Free Layout function Print multiple documents from multiple applications (such as word-processing programs, spreadsheet programs, and so on) next to each other. (→P.
Printing procedure Loading and Printing on Rolls These are the basic steps for loading and printing on rolls. Follow the steps below to switch to a new roll or a roll of a different type or width before printing. Note • Before printing banners or other long documents, spread a clean cloth or paper on the oor. Otherwise use the optional Output Stacker. Otherwise, long sheets that touch the oor after printing may become dirty.
Printing procedure 4. Set a roll on the Roll Holder Slot. (→P.109) 5. Load the roll in the printer. (→P.110) 6. Select the paper type. (→P.105) 7. Specify the paper length. (→P.
Printing procedure 8. Complete settings in the printer driver for the type of paper and other details. • Specifying Paper in the Printer Driver (Windows) (→P.205) • Specifying Paper in the Printer Driver (Mac OS X) (→P.207) • Specifying Paper in the Printer Driver (Mac OS 9) (→P.209) Important • Always specify the same type and size of paper in the printer menu and printer driver. If the type and size do not match, an error message may be displayed and printing may not be possible.
Printing procedure 9. Send the print job. • Printing from Windows (→P.84) • Printing from Mac OS X (→P.85) • Printing from Mac OS 9 (→P.87) Start printing. Note • You can skip steps 6 and 7 if a barcode has been printed on the roll paper and you have activated automatic detection of the remaining roll. The paper type and amount of paper left are automatically detected. The barcode will automatically be cut off after it has been read.
Printing procedure Loading and Printing on Sheets These are the basic steps for loading sheets and then printing. Follow the steps below to load and print on sheets. 1. Turn the printer on. (→P.22) 2. Remove any loaded paper that will not be used. • Roll (→P.113) (→P.114) • Sheet (→P.
Printing procedure 3. Complete settings in the printer driver for the type and size of paper and other details. • Specifying Paper in the Printer Driver (Windows) (→P.205) • Specifying Paper in the Printer Driver (Mac OS X) (→P.207) • Specifying Paper in the Printer Driver (Mac OS 9) (→P.209) 4. Send the print job. • Printing from Windows (→P.84) • Printing from Mac OS X (→P.85) • Printing from Mac OS 9 (→P.
Printing procedure 5. Load the sheet. (→P.135) Note • If you will load a sheet before sending a print job, after you load the sheet, the printer automatically shows a menu for selection of the paper type on the Display Screen. Follow these steps. • Selecting the Paper Type (Sheet) (→P.134) Start printing. Note • If you select a type of paper for which Media Width Detection is deactivated ( Off is selected), you must advance the paper manually to the position for printing. (→P.
Printing procedure Printing from Windows Print from the application software menu. Important • The Windows printer driver can be used in the following versions of Windows: • Windows 2000 (Professional or Server) • Windows XP (Home Edition or Professional) • Windows Server 2003 (Standard Edition) • Windows Vista • We recommend exiting unnecessary applications before printing. Running several applications while printing may interrupt the transfer of print data and affect printing quality. 1.
Printing procedure Printing from Mac OS X Print from the application menu after registering the printer. Important • We recommend exiting unnecessary applications before printing. Running several applications while printing may interrupt the transfer of print data and affect printing quality. Registering the printer Before printing, you must register the printer in Printer Setup Utility (or Print Center ).
Printing procedure 3. Click Print to start printing. As shown in the following illustration, you can switch to other panes in this dialog box to complete settings for various methods of printing, including enlarged and reduced printing, borderless printing, and so on.
Printing procedure Printing from Mac OS 9 After selecting the printer in Chooser from the Apple menu, print by using menus in the application software. Important • We recommend exiting unnecessary applications before printing. Running several applications while printing may interrupt the transfer of print data and affect printing quality. Selecting the printer Before printing, you must conrm that the printer is selected in Chooser.
Printing procedure 2. Make sure the printer is selected in the Printer list. 3. Click Print to start printing.
Canceling print jobs Canceling print jobs Canceling Print Jobs from the Control Panel Hold down the Stop button for a second or more to cancel print jobs or ink drying in progress when the printer is online, ofine, or in Menu mode. Printer operation varies depending on the status when you hold down the Stop button for a second or more during printing.
Canceling print jobs Canceling Print Jobs from Windows You can cancel print jobs in the printer window. 1. Click the printer icon in the taskbar to display the printer window. Note • You can also display this window by double-clicking the printer icon in the Printers and Faxes (or Printers ) folder, accessible through the Windows start menu. 2. Right-click the job to cancel and select Cancel.
Canceling print jobs Canceling Print Jobs from Mac OS X You can cancel print jobs in imagePROGRAF Printmonitor. 1. 2. Click the printer icon in the Dock to display the printer window. Click Stop Jobs to stop printing. In this window, you can cancel jobs sent to the printer. Note • The print job is displayed on the printer’s screen during the transmission of print data from the computer. When the transmission is completed, the job is not displayed even during printing.
Canceling print jobs 2. Select the print job to cancel and click the Cancel Job button to remove the print job. The job sent to the printer is canceled. Note • The print job is displayed on the imagePROGRAF Printmonitor window while the printer receives the print data from the computer. It is not displayed before transmission of print data to the printer, even if the computer has started the process of the data. 3. Exit imagePROGRAF Printmonitor. In the printer window, click Start Jobs.
Canceling print jobs Canceling Print Jobs from Mac OS 9 How to cancel print jobs varies depending on whether you are printing in the foreground or background. Canceling background print jobs 1. Open the GARO Printer Extra folder, which was installed on the hard disk at the same time as the printer driver. 2. 3. Open imagePROGRAF Printmonitor. Choose Pause Printing in the File menu to stop print processing. The job status changes from Sending to Send. 4.
Canceling print jobs Canceling foreground print jobs 1. When the progress indicator is displayed, hold down the Command key and press the period (.) key to cancel print jobs. 2. If the Display Screen of the Control Panel still indicates that the job is in progress and the Data lamp continues ashing, hold down the Stop button for a second or more to stop printing.
Paper Handling Paper Paper Types of Paper For information on the types of paper the printer supports, refer to the Paper Reference Guide . This guide identies supported plain paper, coated paper, photo paper (such as glossy photo paper), proong paper, CAD paper, and other types of paper. The Paper Reference Guide identies types and specications of paper, as well as information on printer driver settings and tips on handling paper.
Paper Viewing the Paper Reference Guide You can access the Paper Reference Guide as follows. Follow the steps for your particular operating system. • Windows 1. Double-click the iPFxxxx Support icon on the desktop. (Here, iPFxxxx represents the printer model.) The online support window is displayed. 2. Select Paper Reference Guide. The Paper Reference Guide is displayed.
Paper • Mac OS X 1. Click the iPF Support icon in the Dock. The online support window is displayed. 2. Select Paper Reference Guide. The Paper Reference Guide is displayed.
Paper • Mac OS 9 1. Double-click the iPFxxxx Paper Reference Guide icon on the desktop. (Here, iPFxxxx represents the printer model.) The Paper Reference Guide is displayed.
Paper Updating paper information You can update paper information in the Paper Reference Guide and on the printer by downloading the latest version of the Media Conguration Tool from the imagePROGRAF website. For information about the Media Conguration Tool, see the Media Conguration Tool Guide (Windows) or Media Conguration Tool Guide (Macintosh). Follow these steps to access the imagePROGRAF website.
Paper • Mac OS X 1. Click the iPF Support icon in the Dock. The online support window is displayed. 2. Select Stay Informed. The default browser is started, and the imagePROGRAF webpage is displayed. Note • In Windows, you can also access the imagePROGRAF webpage by clicking the start menu, selecting Programs > iPFxxxx Media Conguration Tool (here, iPFxxxx represents the printer model) > iPFxxxx Media Conguration Tool to start the Media Conguration Tool, and clicking Extra Information.
Paper Paper Sizes Rolls Rolls that meet the following conditions are supported. • Outer diameter: up to 150 mm (6.0 in) • Inner diameter of paper core: 2 or 3 inches • Printing side out Roll width Roll Paper Width Settings in Printer Driver Borderless Printing (*1) 914.4 mm (36.00 in) 36-in. Roll (914.4mm) Yes 841.0 mm (33.11 in) ISO A0/A1 Roll (841.0mm) Yes 762.0 mm (30.00 in) 30-in. Roll (762.0mm) No 728.0 mm (28.66 in) JIS B1/B2 Roll (728.0mm) Yes 609.6 mm (24.00 in) 24-in. Roll (609.
Paper Paper Size Dimensions JIS B2 515.0 × 728.0 mm (20.28 × 28.66 in) JIS B3 364.0 × 515.0 mm (14.33 × 20.28 in) JIS B4 257.0 × 364.0 mm (10.12 × 14.33 in) 34"x44"(ANSI E) 863.6 × 1117.6 mm (34.00 × 44.00 in) 28"x40"(ANSI F) 711.2 × 1016.0 mm (28.00 × 40.00 in) 22"x34"(ANSI D) 558.8 × 863.6 mm (22.00 × 34.00 in) 17"x22"(ANSI C) 431.8 × 558.8 mm (17.00 × 22.00 in) 11"x17"(Ledger) 279.4 × 431.8 mm (11.00 × 17.00 in) 13"x19"(Super B) 330.2 × 482.6 mm (13.00 × 19.00 in) Letter(8.
Paper Paper Size Dimensions Poster 300x900mm 300.0 × 900.0 mm (11.81 × 35.43 in) Custom Paper Size 203.2 × 203.2 mm (8.00 × 8.00 in) - 917.0 × 1600.0 mm (36.10 × 62.99 in) Note • In the printer driver, paper sizes are categorized into groups based on the “size system” such as ISO A or ANSI. In Windows and Mac OS 9, some size systems are not available by default. Follow the steps below to make them available. Windows: 1. Display the printer driver dialog box. 2.
Handling rolls Handling rolls Selecting the Paper Source When advancing paper, press the Feeder Selection button and select the source. You can determine the selected source by checking which lamp is lit-either the Roll Media lamp (a) or the Cut Sheet lamp (b). • Roll Media lamp : Selected when printing on Roll Media. • Cut Sheet lamp : Selected when printing on Sheets.
Handling rolls Selecting the Paper Type (Roll) When changing the type of paper after the paper has been advanced, specify the type of paper as follows. Important • For best printing results, the printer ne-tunes the feed amount for each type of paper. Be sure to select the type of paper to use correctly before printing. • Because the printer ne-tunes the feed amount for each type of paper, the margins and the size of printed images may vary depending on the type of paper used.
Handling rolls Specifying the Paper Length (Roll) When changing the length of paper after the paper has been advanced, specify the length as follows. Note • When you specify the roll length in the printer menu, Chk Remain.Roll must be set to On. If it is Off, the Roll Length Set menu is not shown.
Handling rolls Loading Rolls on the Roll Holder When printing on rolls, attach the Roll Holder to the roll. Attach the 2-inch or 3-inch paper core attachment to the roll holder, depending on the size of the paper core of the roll you will use. The printer is delivered with the 2-inch paper core attachment installed. (→P.131) Important • Cut the edge of the roll paper if it is uneven, dirty, or has tape residue. Otherwise, it may cause feeding problems and affect the printing quality.
Handling rolls 2. With the edge of the roll paper facing back as shown, set the roll with the Roll Holder from the right. Insert the roll rmly until it touches the ange (a) of the Roll Holder. Important • When loading a roll, be careful to avoid hitting the printer hard with the roll. This may damage the Roll Holder. 3. Insert the Holder Stopper from the right in the Roll Holder as shown.
Handling rolls Loading Rolls in the Roll Holder Slot Once a roll is in the Roll Holder, follow these steps to load the roll in the Roll Holder Slot. Holding the Roll Holder so that the side with the white gear faces the side of the Roll Holder Slot with a white gear, load the Roll Holder shaft (a) into the grooves (b) on both ends of the Roll Holder Slot. Caution • Be careful not to drop the roll and hurt yourself when loading it.
Handling rolls Loading the Roll in the Printer Follow these steps to load rolls in the printer. Note • Remove any loaded paper that will not be used. • Roll (→P.113) (→P.114) • Sheet (→P.139) • If the Platen is dirty, clean inside the Top Cover. (→P.589) 1. Push the Release Lever back and pull out the roll paper evenly on both ends. Insert the edge in the Paper Feed Slot (a) and advance the paper until vacuuming paper starts.
Handling rolls 2. Open the Top Cover. Important • Do not touch the Linear Scale (a) or Carriage Shaft (b). 3. Pull the roll edge gently and align it with the Paper Alignment Line (a). Lower the Release Lever toward the front. Important • Do not force the roll paper into alignment with the Paper Alignment Line (a). This may prevent the paper from being advanced straight.
Handling rolls 4. Close the Top Cover. After you load a roll, the printer automatically shows a menu for selection of the paper type on the Display Screen. At this point, specify the paper type. (→P.
Handling rolls Removing the Roll from the Printer Remove rolls from the printer as follows. Note • If you need to cut a printed roll, select Paper Cutting in the printer menu and cut the roll at the desired position. (→P.124) • If you have selected Media Menu > Chk Remain.Roll > On in the printer menu, a barcode indicating the amount of paper left is printed on the leading edge of the roll.
Handling rolls Removing Rolls From the Roll Holder Slot Remove rolls from the Roll Holder Slot as follows. Make sure the roll is away from the Paper Feed Slot, and then remove the Roll Holder from the Roll Holder Slot.
Handling rolls Removing a Roll from the Roll Holder 1. Lift the Holder Stopper lever (a) from the shaft side to unlock it. Holding the Holder Stopper at the position indicated (b), remove it from the Roll Holder. 2. Remove the roll from the Roll Holder. Important • After removal, store the roll in the original bag or box, away from high temperature, humidity, and direct sunlight.
Handling rolls Clearing Jammed Roll Paper If roll paper jams, follow the steps below to remove jams. 1. 2. Turn the printer off. (→P.22) 3. If the Carriage is out, move the Carriage to separate it from the paper. Open the Top Cover. Important • If you push the Carriage to the left edge, the blade of the Cutter Unit will be lowered in preparation to cut the paper.
Handling rolls 5. Holding the paper on both sides, pull the jammed portion out toward the front. Use a scissors to cut away the printed or wrinkled portion. Caution • When cutting paper, be careful to avoid injury and damaging the printer. 6. If the Carriage is on the left, move the Carriage to the right until it stops. Important • Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may occur when you turn on the printer. 7.
Handling rolls 8. Close the Top Cover. 9. Turn the printer on. (→P.22) The roll is now advanced. After it is nished being advanced, you can resume printing. Note • You can ensure that the edge is cut neatly by following the steps below. 1. Press the Online button to bring the printer ofine. 2. Hold down the ▼ button to advance the paper. 3. Set Paper Cutting to Yes in the printer menu, and the edge will be cut.
Handling rolls Feeding Roll Paper Manually You can bring the printer ofine by pressing the Online button. When the printer is ofine and roll paper is selected as the paper source, you can feed or retract the roll paper by pressing ▲ or ▼. Press ▲ to retract the roll paper manually. Press ▼ to feed the roll paper manually. If you hold down ▲ or ▼ for less than a second, the roll paper will move about 1 mm (0.04 in).
Handling rolls Detection of the Remaining Roll Paper If you have activated automatic detection of the remaining roll paper, when the roll is ejected, a barcode with text is printed on the roll paper that identies the type of paper and amount left. If this function is activated and barcodes are printed on the roll paper, the type of paper and amount left are automatically detected when you load a roll. The barcode will be cut off after it has been read.
Handling rolls Specifying the Ink Drying Time for Rolls When you are using paper that takes longer for ink to adhere, if the Cutter touches printed surfaces that are still wet, it may damage the paper or cause rough cut edges. Also, ink may be transferred onto the paper surface during ejection, soiling it. You can prevent problems by adjusting the drying time after printing before the paper is cut. Windows 1. Display the printer driver dialog box. (→P.419) 2.
Handling rolls Mac OS X 1. 2. Choose Print in the application menu. 3. In the Paper Detailed Settings dialog box displayed next, select C Between Pages and D Select the Main pane and click C Settings in A Media Type. Between Scans in B Drying Time, and then click OK. (→P.
Handling rolls Mac OS 9 1. 2. Choose Print in the application menu. 3. In the Paper Detailed Settings dialog box displayed next, select C Between Pages and D Select the Main pane and click D Settings in A Media Type. Between Scans in B Drying Time, and then click OK. (→P.497) Note • By factory default, Drying Time is deactivated ( Off ) for all paper types. • To have the printer wait for ink to dry immediately after printing without releasing paper, set Cutting Mode to Eject in the printer menu. (→P.
Handling rolls Specifying the Cutting Method for Rolls How a roll is cut after ejection varies depending on the printer settings. Cutting Method Automatic The roll is automatically cut by the Cutter Unit following printer driver settings. Eject (→P.125) Menu Settings Cutting Mode Driver Setting Automatic Auto Cut Yes Choose this setting if you prefer not to have documents dropped immediately after printing, as when waiting for ink to dry.
Handling rolls Eject (waiting for ink to dry after printing) 1. Press the Menu button to display MAIN MENU. 2. 3. 4. 5. 6. Press ▲ or ▼ to select Paper Details, and then press the ► button. Press ▲ or ▼ to select the type of paper, and then press the ► button. Press ▲ or ▼ to select Cutting Mode, and then press the ► button. Press ▲ or ▼ to select Eject, and then press the OK button. Start printing. Roll paper is fed to the specied cut position and then automatically stopped. 7.
Handling rolls Manual (when using media that cannot be cut using the Cutter Unit ) 1. Press the Menu button to display MAIN MENU. 2. 3. 4. 5. 6. Press ▲ or ▼ to select Paper Details, and then press the ► button. Press ▲ or ▼ to select the type of paper, and then press the ► button. Press ▲ or ▼ to select Cutting Mode, and then press the ► button. Press ▲ or ▼ to select Manual, and then press the OK button. Start printing. The printer stops advancing the paper after printing. 7.
Handling rolls 10. Press the Online button. The roll is rewound, and rewinding stops automatically. Paper Cutting (to have the roll cut at your specied position) 1. If the printer stops operating after printing, press the Online button. The printer goes ofine. 2. Press ▲ or ▼ to feed the roll paper to the position for cutting. 3. Press the Menu button to display MAIN MENU. 4. 5. Press ▲ or ▼ to select Paper Cutting, and then press the ► button.
Handling rolls Cutting the Leading Edge of Roll Paper Automatically If the leading edge of a roll is crooked or warped, it may cause an error message or printing problems. In this case, set Trim Edge First to Automatic or On on the Control Panel to have the printer cut the leading edge to make the edge straight after you load a roll. Trim Edge First offers the following options. • Automatic If the left and right side of the leading edge of the roll ((a) and (b)) are uneven by 3 mm (0.
Handling rolls Reducing Dust from Cutting Rolls The printer is equipped with a function to reduce cutting dust for media such as Backlit Film that are more likely to generate debris when cut. This may improve printing quality and help prevent Printhead damage. You can set up this function to be activated for some types of paper. When this function is activated, black lines are printed at the leading and trailing edges of documents.
Handling rolls Roll Holder Set A set of parts comprising the Roll Holder, Holder Stopper, 2-Inch Paper Core Attachment, and 3-Inch Paper Core Attachment. To load a roll with a 3-inch paper core, remove the 2-Inch Paper Core Attachment from the Holder Stopper and then attach the 3-Inch Paper Core Attachment on both the Roll Holder and Holder Stopper.
Handling rolls Attaching Accessories to the Roll Holder The following attachments are provided with the Roll Holder. Use the attachment that matches the size of the paper core of the roll you will use. The printer is delivered with the 2-Inch Paper Core Attachment on the Roll Holder.
Handling rolls Installing the 2-Inch Paper Core Attachment When loading a roll with a 2-inch paper core, remove the 3-Inch Paper Core Attachment from both the Roll Holder and Holder Stopper and then attach the 2-Inch Paper Core Attachment on the Holder Stopper. 1. Push the tips (a) of 3-Inch Paper Core Attachment #1 in and remove the 3-Inch Paper Core Attachment from the Roll Holder. 2.
Handling sheets Handling sheets Selecting the Paper Source When advancing paper, press the Feeder Selection button and select the source. You can determine the selected source by checking which lamp is lit-either the Roll Media lamp (a) or the Cut Sheet lamp (b). • Roll Media lamp : Selected when printing on Roll Media. • Cut Sheet lamp : Selected when printing on Sheets.
Handling sheets Selecting the Paper Type (Sheet) When changing the type of paper after the paper has been advanced, specify the type of paper as follows. Note • After you load the sheet, the printer automatically shows a menu for selection of the paper type on the Display Screen. In this case, select the paper type, and then press the OK button. The printer will automatically go online. 1. Press the Menu button to display MAIN MENU. 2. 3. 4.
Handling sheets Loading the Sheet in the Printer Note • For details on supported types and sizes of the paper, see “Paper Sizes” or the Paper Reference Guide. (→P.101) (→P.95) • Remove any loaded paper that will not be used. • Roll (→P.113) (→P.114) • Sheet (→P.139) • If the Platen is dirty, clean inside the Top Cover. (→P.589) • After pressing the Load/Eject button, you can refer to instructions on the Display Screen as you load the paper. 1.
Handling sheets 2. Open the Top Cover and push the Release Lever back. Important • Do not touch the Linear Scale (a) or Carriage Shaft (b). 3. With a sheet lengthwise and printing-side up, insert it between the Platen (a) and the Paper Retainer (b). Align the edges of the sheet as follows. 1. Align the sheet with the Paper Alignment Line (c) at right. 2. Align the inserted edge of the sheet with the leading edge of the Paper Alignment Line (d), as shown.
Handling sheets Important • Load a sheet so that it is parallel to the Paper Alignment Line (d). Loading paper askew will cause an error. • Warped paper may rub against the Printhead. Straighten paper if it is warped before loading it. • If the sides of the sheet are not perpendicular at the corners, the sheet may not be advanced straight. Note • You can adjust the strength of vacuum holding paper against the Platen when the Release Lever is open.
Handling sheets Manually Loading Paper to the Position for Printing You will need to advance the paper manually to the starting position for printing after selecting the type of paper in the Control Panel menu when rolls or sheets are loaded in the following cases, which require a different paper feeding method than usual. • Rolls If you select a type of paper for which Width Detection is Off when Chk Remain.
Handling sheets Removing the Sheet 1. Press the Load/Eject button. Note • Paper cannot be ejected by using the Load/Eject button when print jobs are in progress or during the ink drying period. Before ejecting paper, press the Stop button to cancel printing, print job processing, or ink drying. 2. Press the OK button to eject the paper. The paper is ejected from the front of the printer. 3. Holding the paper, push the Release Lever back and remove the sheet. 4. Pull the Release Lever forward.
Handling sheets Clearing a Jammed Sheet If a sheet jams, follow the steps below to remove it. 1. 2. Turn the printer off. (→P.22) 3. If the Carriage is out, move the Carriage to separate it from the paper. Open the Top Cover. Important • Do not touch the Linear Scale (a) or Carriage Shaft (b). 4. Push the Release Lever back.
Handling sheets 5. If the paper is visible, grasp the paper and pull it forward. 6. If you cannot see the paper, remove the scrap from behind the printer. After removing the paper, make sure there are no other scraps of paper in the printer. 7. If the Carriage is on the left, move the Carriage to the right until it stops. Important • Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may occur when you turn on the printer. 8. Turn the printer on. (→P.
Output Stacker Output Stacker Using the Output Stacker The Output Stacker can be held at two positions, as shown. • When storing printed documents on the Output Stacker Use position (1). • When the Output Stacker is not used Use position (2). Important • When storing printed documents on the Output Stacker, always use it in position (1). If you do not, printed documents may not be dropped into the Output Stacker, and the printed surface may become soiled. • The Output Stacker can hold one sheet.
Output Stacker Use the Output Stacker in the normal position (a). However, for some types of media, you can use the stacker in the position for easy removal (b). To switch the stacker to the position for easy removal, move the Support Rod to the position of (b). This position enables printed documents to be removed more easily. For information on the position for easy removal, refer to the Paper Reference Guide. (→P.
Printing Photos and Images Working With Various Print Jobs Printing Photos and Images Printing Photos and Images (Windows, Mac OS X) Printing is easy when you simply choose the print target. Easy Settings Simply choose the printing application in the list for optimal printing results. Print Target Choose presets that match the type of document to be printed. Print targets for photos and images Print Target Description Highest Quality Setting optimized for printing at the highest level of quality.
Printing Photos and Images Caution • Depending on the Media Type setting, some Print Target options may not be available. Note • You can check the settings values for each print target by clicking View Settings. • You can also ne-tune these values as needed. ( Advanced Settings ) For details on Advanced Settings, see “Giving Priority to Particular Graphic Elements and Colors for Printing”. (→P.
Printing Photos and Images Printing Photos and Images (Mac OS 9) Printing is easy when you simply choose the print target. Easy Settings Simply choose the printing application in the list for optimal printing results. Print Target Choose presets that match the type of document to be printed. Print targets for photos and images Print Target Description Highest Quality Setting optimized for printing at the highest level of quality.
Printing Photos and Images Caution • Depending on the Media Type setting, some Print Target options may not be available. Note • You can check the settings values for each print target by clicking View Settings. • You can also ne-tune these values as needed. ( Advanced Settings ) For details on Advanced Settings, see “Giving Priority to Particular Graphic Elements and Colors for Printing”. (→P.
Printing Photos and Images Printing Photos and Images (Windows) This topic describes how to print photos based on the following example. • • • • • Document: Photo image from a digital camera Page size: 10×12 inches (254.0×304.8 mm) Paper: Roll Paper type: Glossy Photo Paper Roll paper width: 10 inches (254.0 mm) 1. 2. 3. Choose Print in the application menu. 4. In the A Media Type list, select the type of paper that is loaded.
Printing Photos and Images 6. Click the Page Setup tab to display the Page Setup sheet. 7. In the A Page Size list, click the size of the original as specied in the application. In this case, click 10"x12". 8. 9. Click Roll Paper in the L Paper Source list. Select the width of the loaded roll in the M Roll Paper Width list. In this case, click 10-in. Roll (254.0mm), and then click OK. 10. Specify additional printing conditions.
Printing Photos and Images Printing Photos and Images (Mac OS X) This topic describes how to print photos based on the following example. • • • • • Document: Photo image from a digital camera Page Size: 10×12 inches (254.0×304.8 mm) Paper: Roll Paper Type: Glossy Photo Paper Roll paper Width: 10 inches (254 mm) 1. Choose Page Setup in the application menu to display the Page Attributes dialog box. 2. 3. 4. 5. 6. Select the printer in the B Format for list.
Printing Photos and Images 7. In the A Media Type list, select the type of paper that is loaded. In this case, click Glossy Photo Paper. Make sure the paper you select is loaded in the printer. Note • The paper type setting in the printer driver and related software (as well as on the Control Panel ) is updated when you install the Media Conguration Tool from the User Software CD-ROM or if you change paper information by using the Media Conguration Tool.
Printing Photos and Images 11. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list in this case, 10 in. (254.0mm). Note • If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on the Main pane and update the printer information. 12. Make sure C Page Size on the Page Setup pane shows the original size as specied in C Paper Size in the Page Attributes dialog box-in this case, 10"x12". 13.
Printing Photos and Images Printing Photos and Images (Mac OS 9) This topic describes how to print photos based on the following example. • • • • • Document: Photo image from a digital camera Page size: 10×12 inches (254.0×304.8 mm) Paper: Roll Paper type: Glossy Photo Paper Roll paper width: 10 inches (254.0mm) 1. 2. Select the printer in Chooser. 3. 4. 5. 6. In the A Page Size list, click the size of the original. In this case, click 10"x12".
Printing Photos and Images 7. In the C Media Type list, select the type of paper that is loaded. In this case, click Glossy Photo Paper. In the C Media Type setting, choose the type of paper for printing, such as Glossy Paper, Coated Paper, and so on. Make sure the paper you select is loaded in the printer.
Printing Photos and Images 11. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 10 in. (254.0mm). Note • If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer on the Main pane and update the printer information. 12. Specify additional printing conditions. For details on available printing conditions, see “Printer Driver Settings (Mac OS 9)”. (→P.475) 13.
Printing CAD Drawings Printing CAD Drawings Printing CAD Drawings Using this printer, you can print ne lines and text clearly and sharply. It’s easy to produce highly precise drawings from CAD applications. Note • In Windows, you can print highly precise drawings using the provided imagePROGRAF HDI Driver for AutoCAD/AutoCAD LT. For details on the HDI driver, see the HDI Driver Guide . For instructions on CAD printing, refer to the following topics, as appropriate for your computer and operating system.
Printing CAD Drawings Printing Line Drawings and Text (Windows, Mac OS X) Printing is easy when you simply choose the type of original to print. Easy Settings Simply choose the printing application in the list for optimal printing results. Print Target Choose presets that match the type of document to be printed. Print targets for line drawings and text Print Target Description CAD (Line Drawing) Settings optimized to print intricate lines in CAD drawings clearly.
Printing CAD Drawings Printing Line Drawings and Text (Mac OS 9) Printing is easy when you simply choose the type of original to print. Easy Settings Simply choose the printing application in the list for optimal printing results. Print Target Choose presets that match the type of document to be printed. Print targets for line drawings and text Print Target Description CAD (Line Drawing) Settings optimized to print intricate lines in CAD drawings clearly.
Printing CAD Drawings Printing Line Drawings and Text (Windows) This topic describes how to print line drawings based on the following example. • • • • • Document: CAD drawing Page size: A3 (297.0 × 420.0 mm [11.7 × 16.5 in]) Paper: Roll Paper type: Plain Paper Roll paper width: A2/A3 roll (420.0 mm [16.5 in]) 1. 2. 3. Choose Print in the application menu. 4. 5. In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
Printing CAD Drawings 7. In A Page Size, click the size of the original as specied in the application software. In this case, click ISO A3. 8. 9. Click Roll Paper in the L Paper Source list. Select the width of the loaded roll in the M Roll Paper Width list-in this case, ISO A2/A3 Roll (420.0mm). 10. Specify additional printing conditions. For details on available printing conditions, see “Printer Driver Settings (Windows)”. (→P.407) 11. Conrm the print settings and print as desired.
Printing CAD Drawings Printing Line Drawings and Text (Mac OS X) This topic describes how to print line drawings based on the following example. • • • • • Document: CAD drawing Page size: A3 (297.0 × 420.0 mm [11.7 × 16.5 in]) Paper: Roll Paper type: Plain Paper Roll paper width: A2/A3 roll (420.0 mm [16.5 in]) 1. Choose Page Setup in the application menu to display the Page Attributes dialog box. 2. 3. 4. 5. 6. Select the printer in the B Format for list. 7. 8.
Printing CAD Drawings 9. 10. 11. Access the Page Setup pane. Click Roll Paper in the A Media Source list. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, ISO A2/A3 (420.0mm). Note • If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on the Main pane and update the printer information.
Printing CAD Drawings 12. Make sure C Page Size on the Page Setup pane shows the original size as specied in C Paper Size in the Page Attributes dialog box-in this case, ISO A3. 13. Specify additional printing conditions. For details on available printing conditions, see “Printer Driver Settings (Mac OS X)”. (→P.453) 14. Conrm the print settings, and then click M Print to start printing. Note • For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.
Printing CAD Drawings Printing Line Drawings and Text (Mac OS 9) This topic describes how to print line drawings based on the following example. • • • • • Document: CAD drawing Page size: A3 (297.0 × 420.0 mm [11.7 × 16.5 in]) Paper: Roll Paper type: Plain Paper Roll paper width: A2/A3 roll (420.0 mm [16.5 in]) 1. 2. Select the printer in Chooser. 3. 4. 5. 6. In the A Page Size list, click the size of the original. In this case, click ISO A3. 7. 8.
Printing CAD Drawings 9. 10. 11. Access the Finishing pane. Click Roll Paper in the A Media Source list. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, ISO A2/A3 (420.0mm). Note • If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer on the Main pane and update the printer information. 12. Specify additional printing conditions. For details on available printing conditions, see “Printer Driver Settings (Mac OS 9)”.
Printing CAD Drawings HP-GL/2 Printing This printer supports the original Canon GARO printer control language as well as HP-GL/2 and HP RTL(*1) emulation.(*2) When printing from applications that support HP-GL/2 output, specify HP-GL/2 in the application’s plotter output settings. Note • For instructions on conguring these settings, refer to the software documentation. The printer automatically switches to the corresponding processing depending on whether a GARO, HP-GL/2, or HP RTL job is received.
Printing Ofce Documents Printing Ofce Documents Printing Ofce Documents Printing is easy when you simply choose the type of original to print. Easy Settings Simply choose the printing application in the list for optimal printing results. Print Target Choose presets that match the type of document to be printed. Print targets for ofce documents Print Target Ofce Document Description Settings optimized for clear printing of ofce documents such as handouts.
Printing Ofce Documents Printing Ofce Documents (Windows) This topic describes how to print ofce documents based on the following example. • • • • • Document: Ofce document created using word-processing software or spreadsheet programs Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in) Paper: Sheets Paper type: Plain Paper Paper size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in) 1. 2. 3. Choose Print in the application menu. 4. 5.
Printing Ofce Documents 7. In the A Page Size list, click the size of the original as specied in the application. In this case, click ISO A4 or Letter (8.5"x11"). 8. 9. Select sheets in the L Paper Source list. Specify additional printing conditions. For details on available printing conditions, see “Printer Driver Settings (Windows)”. (→P.407) 10. Conrm the print settings and print as desired. Caution • Depending on the Media Type setting, some Print Target options may not be available.
Printing Ofce Documents Printing Ofce Documents (Mac OS X) This topic describes how to print ofce documents based on the following example. • • • • • Document: Ofce document created using word-processing or spreadsheet programs Page size: A4 (210.0×297.0 mm [8.3×11.7 in])/Letter Paper: Sheets Paper type: Plain Paper Paper size: A4 (210.0×297.0 mm [8.3×11.7 in.])/Letter 1. Choose Page Setup in the application menu to display the Page Attributes dialog box. 2. 3. 4. 5. 6.
Printing Ofce Documents 9. 10. 11. Access the Page Setup pane. Select sheets in the A Media Source list. Make sure the C Page Size setting matches the original size as selected in C Paper Size in the Page Attributes dialog box-in this case, ISO A4. 12. Specify additional printing conditions. For details on available printing conditions, see “Printer Driver Settings (Mac OS X)”. (→P.453) 13. Conrm the print settings, and then click M Print to start printing.
Printing Ofce Documents Printing Ofce Documents (Mac OS 9) This topic describes how to print ofce documents based on the following example. • • • • • Document: Ofce document created using word-processing or spreadsheet programs Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in) Paper: Sheets Paper type: Plain Paper Paper size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in) 1. 2. Select the printer in Chooser. 3. 4. 5. 6. In the A Page Size list, click the size of the original.
Printing Ofce Documents 9. 10. 11. Access the Finishing pane. Click Cut Sheet in the A Media Source list. Specify additional printing conditions. For details on available printing conditions, see “Printer Driver Settings (Mac OS 9)”. (→P.475) 12. Conrm the print settings, and then click N Print to start printing. Note • For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.
Using the Printer With a Color imageRUNNER Using the Printer With a Color imageRUNNER Printing Enlargements of Scanned Originals from a Color imageRUNNER Scanned originals from a Color imageRUNNER can be enlarged and printed automatically. For instructions on printing enlargements of scanned originals from a Color imageRUNNER, refer to the following topic. • Printing Enlargements of Scanned Originals from a Color imageRUNNER (Windows) (→P.
Using the Printer With a Color imageRUNNER 2. Click the Utility tab to display the Utility sheet. 3. Click B Color imageRUNNER Enlargement Copy to start the Color imageRUNNER Enlargement Copy utility. 4. Use the Color imageRUNNER Enlargement Copy utility to register or modify hot folders. For instructions on registering and modifying hot folders, refer to the help le for the Color imageRUNNER Enlargement Copy utility. Completing the scanning settings on the Color imageRUNNER.
Using the Printer With a Color imageRUNNER Printing Enlargements of Scanned Originals from a Color imageRUNNER (Mac OS X) Scanned originals from a Color imageRUNNER can be enlarged and printed automatically. Originals you create by scanning with a Color imageRUNNER are transferred to a "hot folder" and printed automatically after enlargement according to printing conditions you specify for that folder. This processing sequence is called the Color imageRUNNER Enlargement Copy function.
Using the Printer With a Color imageRUNNER Scanning the original and print an enlargement Follow the steps below to scan an original on the Color imageRUNNER for enlarged printing on the printer. For detailed instructions, refer to the Color imageRUNNER manual. 1. 2. 3. 4. Load the original on the platen glass or document feeder of the Color imageRUNNER. Press Send to display the screen for transmission. Press Favorites, and then press the Favorites button assigned to the hot folder.
Adjusting Images Enhanced Printing Options Adjusting Images Adjusting the Color in the Printer Driver Color settings specied in the application for your documents are essentially given priority over other settings for each print job, but further color adjustment is possible in the printer driver. Color Mode Choose how the printer driver processes color, as desired. The available options vary depending on the color mode. Description Color Mode Color Adjustment Color Print in color.
Adjusting Images Matching You can choose the color-matching mode and method. By adjusting the color-matching mode and method, you can make printed colors match the colors of on-screen images more closely. Matching Mode Description Notes Driver Matching Mode Color adjustment based on the original color prole of the printer driver ICC Matching Mode Color adjustment based on ICC color You can select the printer prole in the proles (an international standard) using Printer Prole Settings list.
Adjusting Images Note • Be sure to calibrate your monitor colors correctly if you adjust the colors for printing. If monitor colors are not calibrated correctly, you may not obtain the desired printing results. For instructions on monitor calibration, refer to the documentation for your monitor and operating system. For instructions on color adjustment, refer to the following topics, as appropriate for your computer and operating system. • Fine-Tuning Colors of Photos and Images (Windows) (→P.
Adjusting Images Fine-Tuning Colors of Photos and Images (Windows) You can specify your own print settings instead of using the Print Target presets. This topic describes how to ne-tune the color tone of photos before printing. 1. 2. 3. Choose Print in the application menu. 4. 5. In the A Media Type list, select the type of paper that is loaded. 6. Click Color in the G Color Mode list. Select the printer in the dialog box, and then display the printer driver dialog box. (→P.
Adjusting Images 7. Click H Color Settings to display the Color Settings dialog box. 8. On the Color Adjustment sheet, adjust the color tones, brightness, and so on as desired. Adjustment Item D Cyan Description Fine-tune color tones by adjusting the levels of Cyan, Magenta, and Yellow. E Magenta F Yellow 9. 10. G Gray Tone Adjust the gray tone to suit the images of monochrome photos. Choose cool black (tinged with blue), pure black (neutral), warm black (tinged with red), and so on.
Adjusting Images 11. 12. Conrm the settings of A Page Size, L Paper Source, and so on. Conrm the print settings and print as desired. Note • For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.
Adjusting Images Fine-Tuning Colors of Photos and Images (Mac OS X) You can specify your own print settings instead of using the Print Target presets. This topic describes how to ne-tune the color tone of photos before printing. 1. Choose Page Setup in the application menu to display the Page Attributes dialog box. 2. 3. 4. 5. 6. Select the printer in the B Format for list. 7. In the A Media Type list, select the type of paper that is loaded. Choose the original size in the C Paper Size list.
Adjusting Images 8. 9. 10. Click D Advanced Settings to switch the print mode. Click Color in the H Color Mode list. Click I Set to display the Color Settings dialog box.
Adjusting Images 11. On the Color Adjustment pane, adjust the color tones, brightness, and so on as desired. Adjustment Item D Cyan Description Fine-tune color tones by adjusting the levels of Cyan, Magenta, and Yellow. E Magenta F Yellow G Gray Tone Adjust the gray tone to suit the images of monochrome photos. Choose cool black (tinged with blue), pure black (neutral), warm black (tinged with red), and so on. Select the color tone in the color region or from the list.
Adjusting Images Fine-Tuning Colors of Photos and Images (Mac OS 9) You can specify your own print settings instead of using the Print Target presets. This topic describes how to ne-tune the color tone of photos before printing. 1. 2. Select the printer in Chooser. 3. 4. 5. 6. Choose the original size in the A Page Size list. 7. In the C Media Type list, select the type of paper that is loaded. Choose Page Setup from the application menu to display the Page Attribute dialog box.
Adjusting Images 8. 9. 10. Click E Advanced Settings to switch the print mode. Click Color in the H Color Mode list. Click I Set to display the Color Settingsdialog box.
Adjusting Images 11. On the Color Adjustment pane, adjust the color tones, brightness, and so on as desired. Adjustment Item C Cyan Description Correct color tones by adjusting the levels of Cyan, Magenta, and Yellow. D Magenta E Yellow F Brightness Adjust the brightness of printed images while keeping the darkest and lightest portions intact. G Contrast Adjust the contrast of the darkest and lightest portions relative to each other. For soft gradation, decrease the contrast.
Adjusting Images Giving Priority to Particular Graphic Elements and Colors for Printing You can specify detailed print settings as desired for the quality level, colors, and other criteria. Advanced Settings For printing results that appear just as expected for your original, you can specify which graphic elements and colors to prioritize for printing. Note • Easy Settings are also available, providing convenient presets. To use the presets, simply choose the printing application.
Adjusting Images Print Quality Choose the print quality. The printing mode is determined by a combination of the print quality and resolution. Print Quality (*1) Print Priority Description Highest A setting for printing at the highest resolution when quality is most important. Printing takes longer and consumes more ink than in other modes, but this mode offers superior printing quality. Image High Choose this setting to print at high resolution when quality is most important.
Adjusting Images Enhancing printing quality Setting Item Description Unidirectional Printing Choosing unidirectional printing can improve printing results if lines are printed crooked or images are uneven. However, this takes more time than regular printing. Thicken Fine Lines (Windows) Thicken Fine Lines (Mac OS X) Choose this option to make ne lines clearer in CAD drawings or similar documents. Sharpen Text (*1) Choose this option to print intricate text more distinctly.
Adjusting Images Choosing the Document Type and Printing Conditions (Windows) You can specify your own print settings instead of using the Print Target presets. As an example, this topic describes how to print CAD drawings as clearly as possible, with sharp lines and text. 1. 2. 3. Choose Print in the application menu. 4. 5. In the A Media Type list, select the type of paper that is loaded. 6. 7. Click Line Drawing/Text in the E Print Priority list.
Adjusting Images 8. 9. Click Color (CAD) in the G Color Mode list. To adjust the color, click H Color Settings. Note • For instructions on adjusting color, see “Adjusting the Color in the Printer Driver”. (→P.178) 10. 11. Select the K Sharpen Text check box. 12. 13. Conrm the settings of A Page Size, L Paper Source, and so on. Click the Page Setup tab to display the Page Setup sheet. Conrm the print settings and print as desired.
Adjusting Images Choosing the Document Type and Printing Conditions (Mac OS X) You can specify your own print settings instead of using the Print Target presets. As an example, this topic describes how to print CAD drawings as clearly as possible, with sharp lines and text. 1. Choose Page Setup from the application menu to display the Page Attributes dialog box. 2. 3. 4. 5. 6. Select the printer in the B Format for list. 7. In the A Media Type list, select the type of paper that is loaded.
Adjusting Images 8. 9. 10. Click D Advanced Settings to switch the print mode. Click Line Drawing in the E Print Priority list. Click High(1200dpi) in the F Print Quality list. Note • Options displayed in the F Print Quality list vary depending on the paper type. 11. 12. Click Color (CAD) in the H Color Mode list. To adjust the color, click I Set. Note • For instructions on adjusting color, see “Adjusting the Color in the Printer Driver”. (→P.178) 13. Access the Page Setup pane.
Adjusting Images 14. 15. Conrm the settings of A Media Source and C Page Size. Conrm the print settings, and then click M Print to start printing. Note • For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.
Adjusting Images Choosing the Document Type and Printing Conditions (Mac OS 9) You can specify your own print settings instead of using the Print Target presets. As an example, this topic describes how to print CAD drawings as clearly as possible, with sharp lines and text. 1. 2. Select the printer in Chooser. 3. 4. 5. 6. Choose the original size in the A Page Size list. 7. In the C Media Type list, select the type of paper that is loaded.
Adjusting Images 8. 9. 10. Click E Advanced Settings to switch the print mode. Click Line Drawing in the F Print Priority list. Click High(1200dpi) in the G Print Quality list. Note • Options displayed in the G Print Quality list vary depending on the paper type. 11. 12. Click Color (CAD) in the H Color Mode list. To adjust the color, click I Set. Note • For instructions on adjusting color, see “Adjusting the Color in the Printer Driver”. (→P.178) 13. 14. Select the O Sharpen Text check box.
Adjusting Images 15. 16. Conrm the selection in A Media Source. Conrm the print settings, and then click N Print to start printing. Note • For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.
Choosing Paper for Printing Choosing Paper for Printing Choosing a Paper for Printing Choosing the right paper for your particular printing application will give you the best printing results. Media type The printer and printer driver offer print settings optimized for various paper characteristics. Note • For information on the types of paper the printer supports, refer to the Paper Reference Guide. (→P.
Choosing Paper for Printing Selecting the Paper Type (Roll) When changing the type of paper after the paper has been advanced, specify the type of paper as follows. Important • For best printing results, the printer ne-tunes the feed amount for each type of paper. Be sure to select the type of paper to use correctly before printing. • Because the printer ne-tunes the feed amount for each type of paper, the margins and the size of printed images may vary depending on the type of paper used.
Choosing Paper for Printing Selecting the Paper Type (Sheet) When changing the type of paper after the paper has been advanced, specify the type of paper as follows. Note • After you load the sheet, the printer automatically shows a menu for selection of the paper type on the Display Screen. In this case, select the paper type, and then press the OK button. The printer will automatically go online. 1. Press the Menu button to display MAIN MENU. 2. 3. 4.
Choosing Paper for Printing Specifying Paper in the Printer Driver If you replace the paper, complete the printer driver settings for the paper type and size. For instructions on conguring paper settings in the printer driver, refer to the following topics, as appropriate for your computer and operating system. • Specifying Paper in the Printer Driver (Windows) (→P.205) • Specifying Paper in the Printer Driver (Mac OS X) (→P.207) • Specifying Paper in the Printer Driver (Mac OS 9) (→P.
Choosing Paper for Printing Specifying Paper in the Printer Driver (Windows) If you have replaced the paper, you must complete the following settings in the printer driver. Important • Always specify the same type and size of paper in the printer menu and printer driver. If the type and size do not match, an error message will be displayed and printing is not possible. 1. 2. 3. Choose Print in the application menu. 4. 5. In the A Media Type list, select the type of paper that is loaded. 6. 7.
Choosing Paper for Printing 8. If you have selected Roll Paper in L Paper Source, select the width of the loaded roll in M Roll Paper Width. Note • A variety of settings are available in the printer driver to suit different printing applications. For details on available printing conditions, see “Printer Driver Settings (Windows)”. (→P.
Choosing Paper for Printing Specifying Paper in the Printer Driver (Mac OS X) If you have replaced the paper, you must complete the following settings in the printer driver. 1. Choose Page Setup from the application menu to display the Page Attributes dialog box. 2. 3. 4. 5. 6. Select the printer in the B Format for list. 7. In the A Media Type list, select the type of paper that is loaded. Choose the original size in the C Paper Size list. Click F OK to close the dialog box.
Choosing Paper for Printing 8. 9. 10. Access the Page Setup pane. In the A Media Source list, select how paper is supplied. If you have selected Cut Sheet or Manual in A Media Source, make sure the size as selected in Page Setup is displayed in C Page Size. If you have selected Roll Paper in A Media Source, make sure the width of the loaded roll is displayed in B Roll Paper Width.
Choosing Paper for Printing Specifying Paper in the Printer Driver (Mac OS 9) If you have replaced the paper, you must complete the following settings in the printer driver. 1. 2. Select the printer in Chooser. 3. 4. 5. 6. Choose the original size in the A Page Size list. 7. In the C Media Type list, select the type of paper that is loaded. Choose Page Setup from the application menu to display the Page Attribute dialog box. Click I OK to close the dialog box. Choose Print in the application menu.
Choosing Paper for Printing 8. 9. 10. Access the Finishing pane. In the A Media Source list, select how paper is supplied. If you have selected Roll Paper in A Media Source, make sure the width of the loaded roll is displayed in B Roll Paper Width. Note • If the width of the roll loaded in the printer is not shown in B Roll Paper Width, click L Printer Information on the Main pane to update the printer information.
Printing enlargements or reductions Printing enlargements or reductions Resizing Originals to Match the Paper Size You can freely adjust the size of originals by enlarging or reducing them as desired. Enlarged/Reduced Printing Enlarge or reduce the original in the printer driver, as desired. Fit Paper Size Enlarge or reduce the original to match the size of the paper you are using.
Printing enlargements or reductions Resizing Originals to Match the Paper Size (Windows) This topic describes how to enlarge originals before printing to match the paper size, based on the following example. • • • • • Document: Any Type Page size: A4 (210.0×297.0mm)/Letter (8.3 × 11.7 in) Paper: Roll Paper type: Plain Paper Roll paper width: A2/A3 roll (420.0 mm [16.5 in]) 1. 2. 3. Choose Print in the application menu. 4. 5. 6. In the A Media Type list, select the type of paper that is loaded.
Printing enlargements or reductions 8. Select the width of the loaded roll in the M Roll Paper Width list-in this case, ISO A2/A3 Roll (420.0mm). 9. In the A Page Size list, click the size of the original as specied in the application. In this case, click ISO A4. 10. 11. 12. 13. Select the C Enlarged/Reduced Printing check box. Select the D Fit Paper Size check box. Click ISO A3 in the G Paper Size list. Conrm the print settings and print as desired.
Printing enlargements or reductions Resizing Originals to Match the Paper Size (Mac OS X) This topic describes how to enlarge originals before printing to match the paper size, based on the following example. • • • • • Document: Any Type Page size: A4 (210.0 × 297.0 mm)/Letter (8.3 × 11.7 in) Paper: Roll Paper type: Plain Paper Roll paper width: A2/A3 roll (420.0 mm [16.5 in]) 1. Choose Page Setup in the application menu to display the Page Attributes dialog box. 2. 3. 4. 5. 6.
Printing enlargements or reductions 9. 10. 11. Access the Page Setup pane. Click Roll Paper in the A Media Source list. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, ISO A2/A3 (420.0mm). Note • If the width of the roll loaded in the printer is not shown in B Roll Paper Width, click L Printer Information on the Main pane to update the printer information.
Printing enlargements or reductions 12. Make sure C Page Size on the Page Setup pane shows the original size as specied in C Paper Size in the Page Attributes dialog box-in this case, ISO A4. 13. 14. 15. 16. Select the D Enlarged/Reduced Printing check box. Make sure E Fit Media Size is selected. Click ISO A3 in the I Media Size list. Conrm the print settings, and then click M Print to start printing. Note • For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.
Printing enlargements or reductions Resizing Originals to Match the Paper Size (Mac OS 9) This topic describes how to enlarge originals before printing to match the paper size, based on the following example. • • • • • Document: Any Type Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in) Paper: Roll Paper type: Plain Paper Roll paper width: A2/A3 roll (420.0 mm [16.5 in]) 1. 2. Select the printer in Chooser. 3. 4. 5. 6. In A Page Size, click the size of the original. In this case, click ISO A4.
Printing enlargements or reductions 9. 10. 11. Access the Finishing pane. Click Roll Paper in the A Media Source list. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, ISO A2/A3 (420.0mm). Note • If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer on the Main pane and update the printer information.
Printing enlargements or reductions 12. Access the Page Setup pane. 13. Make sure the B Page Size setting matches the original size as selected in A Page Size in the Page Attribute dialog box-in this case, ISO A4. 14. 15. 16. 17. Select the C Enlarged/Reduced Printing check box. Make sure D Fit Media Size is selected. Click ISO A3 in the H Media Size list. Conrm the print settings, and then click N Print to start printing.
Printing enlargements or reductions Resizing Originals to Fit the Roll Width You can freely adjust the size of originals by enlarging or reducing them as desired. Enlarged/Reduced Printing Enlarge or reduce the original in the printer driver, as desired. Fit Roll Paper Width Enlarge or reduce the original as a whole to match the roll paper width, as desired.
Printing enlargements or reductions Resizing Originals to Fit the Roll Width (Windows) This topic describes how to enlarge originals before printing to match the roll width, based on the following example. • • • • • Document: Any type Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in) Paper: Roll Paper type: Plain Paper Roll paper width: 16 inches (406.4 mm) 1. 2. 3. Choose Print in the application menu. 4. 5. 6. In the A Media Type list, select the type of paper that is loaded.
Printing enlargements or reductions 9. Select the C Enlarged/Reduced Printing check box. Note • If the Enlarged/Reduced Printing check box is not displayed on the Page Setup sheet, clear the B Borderless Printing check box. 10. Click E Fit Roll Paper Width. Note • After you click E Fit Roll Paper Width, the Information dialog box is displayed. Select the width of the loaded roll in the Roll Paper Width list and click OK.
Printing enlargements or reductions Resizing Originals to Fit the Roll Width (Mac OS X) This topic describes how to enlarge originals before printing to match the roll width, based on the following example. • • • • • Document: Any type Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in) Paper: Roll Paper type: Plain Paper Roll paper width: 16 inches (406.4 mm) 1. Choose Page Setup from the application menu to display the Page Attributes dialog box. 2. 3. 4. 5. 6.
Printing enlargements or reductions 9. 10. 11. Access the Page Setup pane. Click Roll Paper in the A Media Source list. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 16 in. (406.4mm). Note • If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on the Main pane and update the printer information.
Printing enlargements or reductions 12. Make sure the C Page Size setting matches the original size as selected in C Paper Size in the Page Attributes dialog box-in this case, ISO A4. 13. 14. 15. Select the D Enlarged/Reduced Printing check box. Click F Fit Roll Paper Width. Conrm the print settings, and then click M Print to start printing. Note • For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.
Printing enlargements or reductions Resizing Originals to Fit the Roll Width (Mac OS 9) This topic describes how to enlarge originals before printing to match the roll paper width, based on the following example. • • • • • Document: Any type Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in) Paper: Roll Paper type: Plain Paper Roll paper width: 16 inches (406.4 mm) 1. 2. Select the printer in Chooser. 3. 4. 5. 6. In A Page Size, click the size of the original. In this case, click ISO A4. 7. 8.
Printing enlargements or reductions 9. 10. 11. Access the Finishing pane. Click Roll Paper in the A Media Source list. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 16 in. (406.4mm). Note • If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer on the Main pane and update the printer information.
Printing enlargements or reductions 12. Access the Page Setup pane. 13. Make sure the B Page Size setting matches the original size as selected in A Page Size in the Page Attribute dialog box-in this case, ISO A4. 14. 15. 16. Select the C Enlarged/Reduced Printing check box. Click E Fit Roll Paper Width. Conrm the print settings, and click N Print to start printing. Note • For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.
Printing enlargements or reductions Resizing Originals by Entering a Scaling Value You can freely adjust the size of originals by enlarging or reducing them as desired. Enlarged/Reduced Printing Enlarge or reduce the original in the printer driver, as desired. Scaling Enlarge or reduce originals by a particular amount, as desired. For instructions on entering a scaling value to resize originals, refer to the following topics, as appropriate for your computer and operating system.
Printing enlargements or reductions Resizing Originals by Entering a Scaling Value (Windows) This topic describes how to enlarge originals before printing by entering a scaling value, based on the following example. • • • • • Document: Any type Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in) Paper: Roll Paper type: Plain Paper Roll paperr width: A2/A3 roll (420.0 mm [16.5 in]) Important • In borderless printing, you cannot resize originals by entering a scaling value. 1. 2. 3.
Printing enlargements or reductions 7. 8. Click Roll Paper in the L Paper Source list. Select the width of the loaded roll in the M Roll Paper Width list-in this case, ISO A2/A3 Roll (420.0mm). 9. In the A Page Size list, click the size of the original as specied in the application. In this case, click ISO A4 or Letter (8.5"x11"). 10. 11. 12. Select the C Enlarged/Reduced Printing check box. Click ISO A4 in the G Paper Size list. Click F Scaling and enter “120.
Printing enlargements or reductions Resizing Originals by Entering a Scaling Value (Mac OS X) This topic describes how to enlarge originals before printing by entering a scaling value, based on the following example. • • • • • Document: Any type Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in) Paper: Roll Paper type: Plain Paper Roll paper width: A2/A3 roll (420.0 mm [16.5 in]) Important • In borderless printing, you cannot resize originals by entering a scaling value. 1.
Printing enlargements or reductions 9. 10. 11. Access the Page Setup pane. Click Roll Paper in the A Media Source list. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, ISO A2/A3 (420.0mm). Note • If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on the Main pane and update the printer information.
Printing enlargements or reductions 12. Make sure the C Page Size setting matches the original size as selected in C Paper Size in the Page Attributes dialog box-in this case, ISO A4. 13. 14. Select the D Enlarged/Reduced Printing check box. Click G Scaling and enter “120.” Note • You can specify enlargement that exceeds the paper size, but in this case, the portion off the edge of the paper will not be printed.
Printing enlargements or reductions Resizing Originals by Entering a Scaling Value (Mac OS 9) This topic describes how to enlarge originals before printing by entering a scaling value, based on the following example. • • • • • Document: Any type Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in) Paper: Roll Paper type: Plain Paper Roll paper width: A2/A3 roll (420.0 mm [16.5 in]) Important • In borderless printing, you cannot resize originals by entering a scaling value. 1. 2.
Printing enlargements or reductions 9. 10. 11. Access the Finishing pane. Click Roll Paper in the A Media Source list. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-here, ISO A2/A3 (420.0mm). Note • If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer on the Main pane and update the printer information.
Printing enlargements or reductions 12. Access the Page Setup pane. 13. Make sure the B Page Size setting matches the original size as selected in A Page Size in the Page Attribute dialog box-in this case, ISO A4. 14. Select the C Enlarged/Reduced Printing check box.
Printing enlargements or reductions 15. Click F Scaling and enter “120.” Note • You can specify enlargement that exceeds the paper size, but in this case, the portion off the edge of the paper will not be printed. • If the original size after enlargement or reduction is smaller than the paper size, the original is printed in the upper-left corner. In this case, you can center originals by selecting F Print Centered on the Finishing pane. 16.
Printing enlargements or reductions Printing Enlargements of Scanned Originals from a Color imageRUNNER Scanned originals from a Color imageRUNNER can be enlarged and printed automatically. For instructions on printing enlargements of scanned originals from a Color imageRUNNER, refer to the following topic. • Printing Enlargements of Scanned Originals from a Color imageRUNNER (Windows) (→P.240) • Printing Enlargements of Scanned Originals from a Color imageRUNNER (Mac OS X) (→P.
Printing enlargements or reductions Printing Enlargements of Scanned Originals from a Color imageRUNNER (Windows) Scanned originals from a Color imageRUNNER can be enlarged and printed automatically. Originals you create by scanning with a Color imageRUNNER are transferred to a "hot folder" and printed automatically after enlargement according to printing conditions you specify for that folder. This processing sequence is called the Color imageRUNNER Enlargement Copy function.
Printing enlargements or reductions Completing the scanning settings on the Color imageRUNNER. Congure the Color imageRUNNER to send scanned originals to the hot folder. It is easy to send scanned originals to the hot folder if you assign the scanning settings and destination to a Favorites button on the Color imageRUNNER.
Printing enlargements or reductions Printing Enlargements of Scanned Originals from a Color imageRUNNER (Mac OS X) Scanned originals from a Color imageRUNNER can be enlarged and printed automatically. Originals you create by scanning with a Color imageRUNNER are transferred to a "hot folder" and printed automatically after enlargement according to printing conditions you specify for that folder. This processing sequence is called the Color imageRUNNER Enlargement Copy function.
Printing enlargements or reductions Scanning the original and print an enlargement Follow the steps below to scan an original on the Color imageRUNNER for enlarged printing on the printer. For detailed instructions, refer to the Color imageRUNNER manual. 1. 2. 3. 4. Load the original on the platen glass or document feeder of the Color imageRUNNER. Press Send to display the screen for transmission. Press Favorites, and then press the Favorites button assigned to the hot folder.
Printing at full size Printing at full size Printing on Oversized Paper Except in borderless printing, the actual printing area corresponds to your selected paper size minus the space for a margin. (→P.74) To print documents or images you prepare without a margin at actual size, use an oversized paper size. For example, to print a A4-sized original without a margin at A4 size, print it on paper larger than A4 size and cut away the excess margin.
Printing at full size Note • Oversized printing (selecting Oversize in Page Size ) is only available in Windows. For oversized printing on sheets, choose Cut Sheet as the media source. • To perform oversized printing on a Macintosh computer, you must specify a non-standard page size and print on it. • To specify a non-standard paper size in oversized printing, register the paper size as a Custom Paper Size. Oversized printing is not available with “Custom Size.” (→P.
Printing at full size Printing at Full Size (Windows) This topic describes how to print at full size based on the following example. (Oversized Printing) • • • • • Document: Any Type Page Size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in) Paper: Roll Paper type: Plain Paper Roll paper width: A2/A3 roll (420.0 mm [16.5 in]) 1. 2. 3. Choose Print in the application menu. 4. 5. In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper. 6. 7. 8. 9.
Printing at full size 10. 11. Click Roll Paper in the L Paper Source list. Select the width of the loaded roll in the M Roll Paper Width list-in this case, ISO A2/A3 Roll (420.0mm). 12. Conrm the print settings and print as desired. Note • For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.411) Note • You can select Oversize in Display Series to make all oversized versions of paper in the selected Display Series available for printing.
Printing at full size Printing at Full Size (Mac OS X) This topic describes how to print at full size based on the following example. (Oversized Printing) • • • • • Document: Any type Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in) Paper: Roll Paper type: Plain Paper Roll paper width: A2/A3 roll (420.0 mm [16.5 in]) 1. Choose Page Setup from the application menu to display the Page Attributes dialog box. 2. 3. Select the printer in the B Format for list.
Printing at full size 9. 10. 11. Access the Page Setup pane. Click Roll Paper in the A Media Source list. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, ISO A2/A3 (420.0mm). Note • If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on the Main pane and update the printer information.
Printing at full size 12. Make sure C Page Size shows the original size as specied in C Paper Size in the Page Attributes dialog box-in this case, ISO A4 - Oversize. 13. Conrm the print settings, and then click M Print to start printing. Note • For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.
Printing at full size Printing at Full Size (Mac OS 9) This topic describes how to print at full size based on the following example. (Oversized Printing) • • • • • Document: Any type Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in) Paper: Roll Paper type: Plain Paper Roll paper width: A2/A3 roll (420.0 mm [16.5 in]) 1. 2. Select the printer in Chooser. 3. 4. 5. 6. 7. In D Print Area Setting, click G For printing oversizes. 8. 9.
Printing at full size 10. Access the Finishing pane. 11. 12. Click Roll Paper in the A Media Source list. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, ISO A2/A3 (420.0mm). Note • If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer on the Main pane and update the printer information. 13. Conrm the print settings, and then click N Print to start printing.
Printing at full size Borderless Printing at Actual Size Take advantage of borderless printing to print documents such as posters (made up mainly of photos or images) without a surrounding margin, or border. Borderless Printing In regular printing, a margin required by the printer is added around the original. With borderless printing, you can print documents without the margin, so that the printed image covers the entire surface of the paper. Important • Borderless printing is only available with rolls.
Printing at full size Print Image with Actual Size Prints originals at actual size, without enlarging or reducing them. Originals must be prepared in a size that exceeds the dimensions of the paper by 3 mm (0.12 in) on each side. Note • Not all page sizes are available. • Even if you prepare originals of the same size as the paper size, the originals are automatically enlarged when you print borderlessly in combination with resizing originals to match the paper size. This may affect image quality.
Printing at full size Borderless Printing at Actual Size (Windows) This topic describes how to print borderlessly at actual size based on the following example. • • • • • 1. Document: Any type Page size: 10×12 inches (254.0×304.8 mm) Paper: Roll Paper type: Heavyweight Coated Paper Roll paper width: 10 inches (254.0 mm) Create the original in the source application 3 mm (0.12 in) larger on each side than 254.0×304.8 mm (10 × 12 in) -that is, 260.0×310.8 mm (10.2 × 12.
Printing at full size 7. Click the Page Setup tab to display the Page Setup sheet. 8. In the A Page Size list, click the size of the original as specied in the source application. In this case, click 10"x12". 9. 10. Click Roll Paper in the L Paper Source list. 11. Select the width of the loaded roll in the Roll Paper Width list-in this case, click 10-in. Roll Select the B Borderless Printing check box to display the Information dialog box. (254.0mm). 12. 13. 14.
Printing at full size Borderless Printing at Actual Size (Mac OS X) This topic describes how to print borderlessly at actual size based on the following example. • • • • • Document: Any type Page size: 10 × 12 inches (254.0×304.8 mm)-Borderless Paper: Roll Paper type: Heavyweight Coated Paper Roll paper width: 10 inches (254.0 mm) 1. Choose Page Setup from the application menu to display the Page Attributes dialog box. 2. 3. Select the printer in the B Format for list.
Printing at full size 10. Access the Page Setup pane. 11. 12. Click Roll Paper in the A Media Source list. Conrm that the roll paper width matches the paper size. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 10 in. (254.0mm). Note • If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on the Main pane and update the printer information.
Printing at full size 13. Make sure the C Page Size setting matches the original size as selected in C Paper Size in the Page Attributes dialog box-in this case, 10"x12" - Borderless. 14. Conrm the print settings, and then click M Print to start printing. Note • For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.
Printing at full size Borderless Printing at Actual Size (Mac OS 9) This topic describes how to print borderlessly at actual size based on the following example. • • • • • Document: Any type Page size: 10 × 12 inches (254.0×304.8 mm)-Borderless Paper: Roll Paper type: Heavyweight Coated Paper Roll width: 10 inches (254.0 mm) 1. 2. Select the printer in Chooser. 3. 4. In D Print Area Setting, click H For Broderless Printing.
Printing at full size 9. In the C Media Type list, select the type of paper that is loaded. In this case, click Heavyweight Coated Paper. 10. 11. Select the print target in the F Print Target list. 12. 13. Click Roll Paper in the A Media Source list. Access the Finishing pane. Conrm that the roll paper width matches the paper size. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 10 in. (254.0mm).
Printing at full size 14. Access the Page Setup pane. 15. Make sure the B Page Size setting matches the original size as selected in A Page Size in the Page Attribute dialog box-in this case, 10"x12". 16. Conrm the print settings, and click N Print to start printing. Note • For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.
Borderless Printing Borderless Printing Borderless Printing on Paper of Equivalent Size Take advantage of borderless printing to print documents such as posters (made up mainly of photos or images) without a surrounding margin, or border. Borderless Printing In regular printing, a margin required by the printer is added around the original. With borderless printing, you can print documents without the margin, so that the printed image covers the entire surface of the paper.
Borderless Printing Fit Paper Size Enlarge or reduce the original to match the size of the paper you are using. Note • The printer driver automatically enlarges originals 3 mm (0.12 in) past the dimensions of the paper on each side. The 3 mm portion beyond the edge on each side is not printed. For instructions on borderless printing of photos, images, and other documents to match the paper size, refer to the following topics, as appropriate for your computer and operating system.
Borderless Printing Borderless Printing by Resizing Originals to Match the Paper Size (Windows) This topic describes how to enlarge originals before borderless printing to match the paper size, based on the following example. • • • • • 1. Document: Any type Page size: 10×12 inches (254.0×304.8 mm) Paper: Roll Paper type: Heavyweight Coated Paper Roll paper width: 10 inches (254.0 mm) In the application, create an original that takes up the entire space of the paper size.
Borderless Printing 7. Click the Page Setup tab to display the Page Setup sheet. 8. In the A Page Size list, click the size of the original as specied in the application. In this case, click 10"x12". 9. 10. Click Roll Paper in the L Paper Source list. 11. Select the width of the loaded roll in the Roll Paper Width list-in this case, click 10-in. Roll Select the B Borderless Printing check box to display the Information dialog box. (254.0mm). 12. 13. 14. 15.
Borderless Printing Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS X) This topic describes how to enlarge originals before borderless printing to match the paper size, based on the following example. • • • • • Document: Any type Page size: 10×12 inches (254.0×304.8 mm) Paper: Roll Paper type: Heavyweight Coated Paper Roll paper width: 10 inches (254.0 mm) 1. Choose Page Setup from the application menu to display the Page Attributes dialog box. 2. 3.
Borderless Printing 9. 10. Select the print target in the E Print Target list. 11. 12. Click Roll Paper in the A Media Source list. Access the Page Setup pane. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 10 in. (254.0mm). Note • If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on the Main pane and update the printer information.
Borderless Printing 13. Make sure the C Page Size setting matches the original size as selected in C Paper Size in the Page Attributes dialog box-in this case, 10"x12". 14. 15. 16. 17. 18. On the Page Setup pane, select the D Enlarged/Reduced Printing check box. Select the H Borderless Printing check box. Click E Fit Media Size under D Enlarged/Reduced Printing. In I Media Size, click the paper size. In this case, click 10"x12" - Borderless.
Borderless Printing Borderless Printing by Resizing Originals to Match the Paper Size (Mac OS 9) This topic describes how to enlarge originals before borderless printing to match the paper size, based on the following example. • • • • • Document: Any type Page size: 10×12 inches (254.0×304.8 mm) Paper: Roll Paper type: Heavyweight Coated Paper Roll width: 10 inches (254.0 mm) 1. 2. Select the printer in Chooser. 3. In the A Page Size list, click the size of the original. In this case, click 10"x12".
Borderless Printing 8. In the C Media Type list, select the type of paper that is loaded. In this case, click Heavyweight Coated Paper. 9. 10. Select the print target in the F Print Target list. 11. 12. Click Roll Paper in the A Media Source list. Access the Finishing pane. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 10 in. (254.0mm).
Borderless Printing 13. Access the Page Setup pane. 14. Make sure the B Page Size setting matches the original size as selected in A Page Size in the Page Attribute dialog box-in this case, 10"x12". 15. 16. 17. 18. 19. Select the C Enlarged/Reduced Printing check box. Select the G Borderless Printing check box. Click D Fit Media Size under C Enlarged/Reduced Printing. In H Media Size, click the paper size. In this case, click 10"x12" - Borderless.
Borderless Printing Borderless Printing by Resizing Originals to Fit the Roll Width Take advantage of borderless printing to print documents such as posters (made up mainly of photos or images) without a surrounding margin, or border. Borderless Printing In regular printing, a margin required by the printer is added around the original. With borderless printing, you can print documents without the margin, so that the printed image covers the entire surface of the paper.
Borderless Printing Scale to t Roll Paper Width Enlarge or reduce the original as a whole to match the roll paper width. Note • You can combine this function with rotating pages 90 degrees before printing so that the original width (relative to portrait orientation) matches the roll paper width in borderless printing.
Borderless Printing Borderless Printing by Resizing Originals to Fit the Roll Width (Windows) This topic describes how to enlarge originals before borderless printing to match the roll width, based on the following example. • • • • • 1. Document: Any type Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in) Paper: Roll Paper type: Heavyweight Coated Paper Roll paper width: 10 inches (254.0 mm) In the application, create an original that takes up the entire space of the paper size.
Borderless Printing 7. Click the Page Setup tab to display the Page Setup sheet. 8. In the A Page Size list, click the size of the original as specied in the application. In this case, click ISO A4 or Letter (8.5"x11"). 9. 10. Click Roll Paper in the L Paper Source list. 11. Select the width of the loaded roll in the Roll Paper Width list-in this case, click 10-in. Roll Select the B Borderless Printing check box to display the Information dialog box. (254.0mm). 12. 13. 14.
Borderless Printing Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS X) This topic describes how to enlarge originals before printing to match the roll width, based on the following example. • • • • • Document: Any type Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in) Paper: Roll Paper type: Heavyweight Coated Paper Roll paper width: 10 inches (254.0 mm) 1. Choose Page Setup from the application menu to display the Page Attributes dialog box. 2. 3.
Borderless Printing 10. Access the Page Setup pane. 11. 12. Click Roll Paper in the A Media Source list. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-here, 10 in. (254.0mm). Note • If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on the Main pane and update the printer information.
Borderless Printing 13. Make sure the C Page Size setting matches the original size as selected in C Paper Size in the Page Attributes dialog box-in this case, ISO A4. 14. 15. Select the D Enlarged/Reduced Printing check box. Select the H Borderless Printing check box. This ensures that F Fit Roll Paper Width is automatically selected in D Enlarged/Reduced Printing. 16. Conrm the print settings, and then click M Print to start printing.
Borderless Printing Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS 9) This topic describes how to enlarge originals before printing to match the roll width, based on the following example. • • • • • Document: Any type Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in) Paper: Roll Paper type: Heavyweight Coated Paper Roll width: 10 inches (254.0 mm) 1. 2. Select the printer in Chooser. 3. In A Page Size, click the size of the original. In this case, click ISO A4.
Borderless Printing 8. In the C Media Type list, select the type of paper that is loaded. In this case, click Heavyweight Coated Paper. 9. 10. Select the print target in the F Print Target list. 11. 12. Click Roll Paper in the A Media Source list. Access the Finishing pane. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 10 in. (254.0mm).
Borderless Printing 13. Access the Page Setup pane. 14. Make sure the B Page Size setting matches the original size as selected in A Page Size in the Page Attribute dialog box-in this case, ISO A4. 15. 16. Select the C Enlarged/Reduced Printing check box. Select the G Borderless Printing check box. This ensures that E Fit Roll Paper Width is automatically selected in C Enlarged/Reduced Printing. 17. Conrm the print settings, and click N Print to start printing.
Borderless Printing Borderless Printing at Actual Size Take advantage of borderless printing to print documents such as posters (made up mainly of photos or images) without a surrounding margin, or border. Borderless Printing In regular printing, a margin required by the printer is added around the original. With borderless printing, you can print documents without the margin, so that the printed image covers the entire surface of the paper. Important • Borderless printing is only available with rolls.
Borderless Printing Print Image with Actual Size Prints originals at actual size, without enlarging or reducing them. Originals must be prepared in a size that exceeds the dimensions of the paper by 3 mm (0.12 in) on each side. Note • Not all page sizes are available. • Even if you prepare originals of the same size as the paper size, the originals are automatically enlarged when you print borderlessly in combination with resizing originals to match the paper size. This may affect image quality.
Borderless Printing Borderless Printing at Actual Size (Windows) This topic describes how to print borderlessly at actual size based on the following example. • • • • • 1. Document: Any type Page size: 10×12 inches (254.0×304.8 mm) Paper: Roll Paper type: Heavyweight Coated Paper Roll paper width: 10 inches (254.0 mm) Create the original in the source application 3 mm (0.12 in) larger on each side than 254.0×304.8 mm (10 × 12 in) -that is, 260.0×310.8 mm (10.2 × 12.
Borderless Printing 7. Click the Page Setup tab to display the Page Setup sheet. 8. In the A Page Size list, click the size of the original as specied in the source application. In this case, click 10"x12". 9. 10. Click Roll Paper in the L Paper Source list. 11. Select the width of the loaded roll in the Roll Paper Width list-in this case, click 10-in. Roll Select the B Borderless Printing check box to display the Information dialog box. (254.0mm). 12. 13. 14.
Borderless Printing Borderless Printing at Actual Size (Mac OS X) This topic describes how to print borderlessly at actual size based on the following example. • • • • • Document: Any type Page size: 10 × 12 inches (254.0×304.8 mm)-Borderless Paper: Roll Paper type: Heavyweight Coated Paper Roll paper width: 10 inches (254.0 mm) 1. Choose Page Setup from the application menu to display the Page Attributes dialog box. 2. 3. Select the printer in the B Format for list.
Borderless Printing 10. Access the Page Setup pane. 11. 12. Click Roll Paper in the A Media Source list. Conrm that the roll paper width matches the paper size. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 10 in. (254.0mm). Note • If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on the Main pane and update the printer information.
Borderless Printing 13. Make sure the C Page Size setting matches the original size as selected in C Paper Size in the Page Attributes dialog box-in this case, 10"x12" - Borderless. 14. Conrm the print settings, and then click M Print to start printing. Note • For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.
Borderless Printing Borderless Printing at Actual Size (Mac OS 9) This topic describes how to print borderlessly at actual size based on the following example. • • • • • Document: Any type Page size: 10 × 12 inches (254.0×304.8 mm)-Borderless Paper: Roll Paper type: Heavyweight Coated Paper Roll width: 10 inches (254.0 mm) 1. 2. Select the printer in Chooser. 3. 4. In D Print Area Setting, click H For Broderless Printing.
Borderless Printing 9. In the C Media Type list, select the type of paper that is loaded. In this case, click Heavyweight Coated Paper. 10. 11. Select the print target in the F Print Target list. 12. 13. Click Roll Paper in the A Media Source list. Access the Finishing pane. Conrm that the roll paper width matches the paper size. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 10 in. (254.0mm).
Borderless Printing 14. Access the Page Setup pane. 15. Make sure the B Page Size setting matches the original size as selected in A Page Size in the Page Attribute dialog box-in this case, 10"x12". 16. Conrm the print settings, and click N Print to start printing. Note • For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.
Printing banners or at other non-standard sizes Printing banners or at other non-standard sizes Printing Vertical or Horizontal Banners (Large-Format Printing) You can create vertical or horizontal banners by printing originals that are in banner format on rolls. Originals created in Microsoft Word or other applications in your preferred size can be enlarged to ll the width of roll paper by completing simple printer driver settings.
Printing banners or at other non-standard sizes Printing Vertical or Horizontal Banners (Large-Format Printing; Windows) This topic describes how to print a banner about ve times as long as the roll width based on the following example. • • • • • Document: A horizontal banner created in Microsoft Word Page size: Non-standard (100×500 mm [3.9×19.7 in]) Paper: Roll Paper type: Plain Paper Roll paper width: 16 in (406.4 mm) Follow the steps below to print a banner in either horizontal or vertical format.
Printing banners or at other non-standard sizes 10. Close the printer driver dialog box. Note • You can also specify a Custom Size as the paper size. Note that Custom Size settings are not available after you exit the application. For more information, see “Printing on Non-Standard Paper Sizes (Windows)”. (→P.306) Creating the banner in the application Follow the steps below to create the banner in Microsoft Word using the Custom Paper Size you registered. 1. 2. 3. Start Microsoft Word.
Printing banners or at other non-standard sizes 6. Click the Page Setup tab to display the Page Setup sheet. 7. 8. In the A Page Size list, click the size you registered, "My Horizontal Banner." Select the C Enlarged/Reduced Printing check box. Note • If the Enlarged/Reduced Printing check box is not displayed on the Page Setup sheet, clear the B Borderless Printing check box. 9. 10. 11. Click Roll Paper in the L Paper Source list.
Printing banners or at other non-standard sizes 12. Conrm the print settings and print as desired. Note • For instructions on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.411) Note • If printing is unsuccessful, you may be able to print after completing the following setting. 1. On the Layout sheet, click M Special Settings to display the Special Settings dialog box. 2. In the FineZoom Settings list, click Yes.
Printing banners or at other non-standard sizes Printing Vertical or Horizontal Banners (Large-Format Printing; Mac OS X) This topic describes how to print a banner about ve times as long as the roll width based on the following example. • • • • • Document: An original designed for a horizontal banner Page Size: Non-standard (100×500 mm [3.9×19.7 in]) Paper: Roll Paper type: Plain Paper Roll paper width: 16 inches (406.
Printing banners or at other non-standard sizes 9. In the C Paper Size list, click the size of the original. In this case, click "100*500", the size you registered. 10. 11. In D Orientation, click the icon of the document in landscape orientation. Click F OK to close the dialog box. Print the banner Follow the steps below to print the banner using the corresponding banner settings. 1. 2. Choose Print in the application menu. 3. 4. 5.
Printing banners or at other non-standard sizes 7. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 16 in. (406.4mm). Note • If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on the Main pane and update the printer information. 8. 9. 10. 11. In C Page Size, make sure "100*500" is displayed, as registered in Page Setup. Select the D Enlarged/Reduced Printing check box. Click F Fit Roll Paper Width.
Printing banners or at other non-standard sizes Printing Vertical or Horizontal Banners (Large-Format Printing; Mac OS 9) This topic describes how to print a banner about ve times as long as the roll width based on the following example. • • • • • Document: An original designed for a horizontal banner Page size: Non-standard (100×500 mm, [3.9×19.7 in]) Paper: Roll Paper type: Plain Paper Roll paper width: 10 inches (254.0 mm) The steps to print a vertical or horizontal banner are as follows. 1.
Printing banners or at other non-standard sizes 9. 10. 11. 12. Access the Page Attribute dialog box. In the A Page Size list, click the size you added, “My Horizontal Banner.” In B Orientation, click the icon of the document in landscape orientation. Click I OK to close the dialog box. Print the banner Follow these steps to print the banner using the corresponding banner settings. 1. 2. Choose Print in the application menu. 3. 4. In the C Media Type list, select the type of paper that is loaded.
Printing banners or at other non-standard sizes 5. Access the Finishing pane. 6. 7. Click Roll Paper in the A Media Source list. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 10 in. (254.0mm). Note • If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer on the Main pane and update the printer information.
Printing banners or at other non-standard sizes 8. 9. 10. 11. 12. Access the Page Setup pane. In B Page Size, make sure “My Horizontal Banner” is displayed, as registered in Media Design. Select the C Enlarged/Reduced Printing check box. Click E Fit Roll Paper Width. Conrm the print settings, and then click N Print to start printing. Note • For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.
Printing banners or at other non-standard sizes Printing on Non-Standard Paper Sizes By specifying the paper size, you can print on non-standard sizes of paper. There are two ways to print on non-standard paper sizes, as follows. Registering non-standard paper size in the printer driver After you register non-standard paper sizes, they are listed with standard sizes so that you can choose them anytime as needed.
Printing banners or at other non-standard sizes Printing on Non-Standard Paper Sizes (Windows) This topic describes two ways to print on non-standard paper sizes. • Printing by using Custom Size (→P.306) • Printing by using Custom Paper Size (→P.308) Printing by using Custom Size This section describes how to print using Custom Size based on the following example. • • • • • Document: Scanned image Page size: Square of non-standard dimensions (430 × 430 mm [16.9 × 16.
Printing banners or at other non-standard sizes 7. 8. 9. 10. Click the Page Setup tab to display the Page Setup sheet. Click Cut Sheet in the L Paper Source list. Click Custom Size in the A Page Size list to display the Custom Size Settings dialog box. Complete the following settings in the Custom Size Settings dialog box. 1. Select mm or inch in Units. 2. Enter “430” (16.9 in) in both Width and Height. 11. 12. Click OK to close the Custom Size Settings dialog box.
Printing banners or at other non-standard sizes Printing by using Custom Paper Size This section describes how to print using Custom Paper Size based on the following example. First, register a non-standard paper size called “430 mm Square” as a Custom Paper Size. • • • • • Document: Scanned image Page size: A square sheet (430 × 430 mm [16.9 × 16.9 in]) Paper: Sheets Paper type: Plain Paper Paper size: A square sheet (430 × 430 mm [16.9 × 16.9 in]) 1. 2. 3. 4. Load the square paper (430 × 430 mm [16.
Printing banners or at other non-standard sizes 7. Click the Page Setup tab to display the Page Setup sheet. 8. 9. Click O Size Options to display the Paper Size Options dialog box. Complete the following settings in the Paper Size Options dialog box. 1. Enter a desired paper name in Custom Paper Size Name. “430 mm Square” is used in this example. 2. Select mm or inch in Units. 3. Enter “430” (16.9 in) in both Width and Height.
Printing banners or at other non-standard sizes Printing on Non-Standard Paper Sizes (Mac OS X) This topic describes how to print after registering “Custom Media Size” based on the following example. Here, you will register a non-standard paper size named “430*430” in “Custom Media Size”. • • • • • Document: Scanned image Page size: A square sheet (430 × 430 mm [16.9 × 16.9 in]) Paper: Sheets Paper type: Plain Paper Paper size: A square sheet (430 × 430 mm [16.9 × 16.
Printing banners or at other non-standard sizes 13. Access the Main pane. 14. 15. In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper. After conrming that D Easy Settings is selected, click Scanned Image in the E Print Target list. 16. Access the Page Setup pane. 17. 18. 19. Click Cut Sheet in the A Media Source list. In D Easy Settings, make sure “430*430” is displayed, as registered in Page Setup.
Printing banners or at other non-standard sizes Printing on Non-Standard Paper Sizes (Mac OS 9) This section describes how to print using Custom Paper Size based on the following example. Here, you will register a non-standard paper size named “430*430” in Custom Paper Size. Document: • • • • • Document: Scanned image Page size: A square sheet (430 × 430 mm [16.9 × 16.9 in]) Paper: Sheets Paper type: Plain Paper Paper size: A square sheet (430 × 430 mm [16.9 × 16.9 in]) 1. 2. 3. 4.
Printing banners or at other non-standard sizes 9. 10. Access the Page Attribute dialog box. In the A Page Size list, click the size of the original. In this case, click “430*430”, the size you registered. 11. 12. 13. 14. 15. In D Print Area Setting, click E Standard. 16. 17. In the C Media Type list, select the type of paper that is loaded. In this case, click Plain Paper. Click Cut Sheet in the E Standard list. Click I OK to close the dialog box. Choose Print in the application menu.
Printing banners or at other non-standard sizes 18. Access the Finishing pane. 19. 20. Click Cut Sheet in the A Media Source list. Conrm the print settings, and then click N Print to start printing. Note • For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.
Tiling and multiple pages per sheet Tiling and multiple pages per sheet Printing Multiple Originals Next to Each Other By arranging originals from word-processing or spreadsheet programs or web browser screen shots next to each other on single sheets, you can create highly expressive presentation materials, easy-to-understand meeting materials, and a variety of other printed documents.
Tiling and multiple pages per sheet imagePROGRAF Free Layout (Macintosh) Besides combining multiple pages in a single-page layout, you can combine originals from multiple les-even multiple source applications-in a single-page layout. Important • The driver must be installed from the User Software CD-ROM to use this function. For instructions on arranging originals from multiple applications, refer to the following topics. • Printing Multiple Originals Next to Each Other (Windows) (→P.
Tiling and multiple pages per sheet Printing Multiple Originals Next to Each Other (Windows) This topic describes how to arrange multiple originals using the Free Layout function. 1. 2. 3. Choose Print in the application menu. 4. Click the Layout tab to display the Layout sheet. 5. 6. Select the A Page Layout check box. Select the printer in the dialog box, and then open the printer driver dialog box. (→P.417) Make sure the Main sheet is displayed. Click Free Layout in the B Page Layout list.
Tiling and multiple pages per sheet 7. When you attempt to print, the imagePROGRAF Free Layout window is displayed. (At this point, the document will not be printed yet.) 8. Edit and rearrange the image in the imagePROGRAF Free Layout window as desired. Important • Without closing the imagePROGRAF Free Layout window, repeat steps 1-7 to arrange originals from multiple applications on the same page.
Tiling and multiple pages per sheet Printing Multiple Originals Next to Each Other (Mac OS X) This topic describes how to use the Free Layout function to arrange multiple originals next to each other before printing. 1. 2. Choose Print in the application menu. 3. The Canon imagePROGRAF Free Layout window is displayed. 4. Edit and rearrange the image in the Canon imagePROGRAF Free Layout window as desired. Click PDF and select Canon imagePROGRAF Free Layout.
Tiling and multiple pages per sheet 5. Print from the Canon imagePROGRAF Free Layout menu. Note • For details on Canon imagePROGRAF Free Layout functions, refer to Free Layout .
Tiling and multiple pages per sheet Printing Multiple Pages Continuously You can print multiple pages as a single continuous image, without margins between pages. Roll paper (banner) Important • This feature is only available with rolls. It cannot be used when printing on sheets. • During banner printing, settings for conserving paper, number of copies, borderless printing, enlargement or reduction, and other layout-related settings are disregarded.
Tiling and multiple pages per sheet Printing Multiple Pages Continuously (Windows) This topic describes how to print multiple pages as a single continuous image, without margins between pages. Important • This feature is only available with rolls. It cannot be used when printing on sheets. • During banner printing, settings for conserving paper, number of copies, borderless printing, enlargement or reduction, and other layout-related settings are disregarded. 1. 2. 3.
Tiling and multiple pages per sheet 7. 8. 9. 10. Click N Roll Paper Options to display the Roll Paper Options dialog box. Select the B Banner Printing check box. Click OK. Conrm the print settings and print as desired. Note • For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.
Tiling and multiple pages per sheet Printing Multiple Pages Continuously (Mac OS X) This topic describes how to print multiple pages as a single continuous image, without margins between pages. Important • This feature is only available with rolls. It cannot be used when printing on sheets. • During banner printing, settings for conserving paper, number of copies, borderless printing, enlargement or reduction, and other layout-related settings are disregarded. 1.
Tiling and multiple pages per sheet 9. 10. 11. Access the Page Setup pane. Click Roll Paper (Banner) in the A Media Source list. Conrm the print settings, and then click M Print to start printing. Note • For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.
Tiling and multiple pages per sheet Printing Multiple Pages Continuously (Mac OS 9) This topic describes how to print multiple pages as a single continuous image, without margins between pages. Important • This feature is only available with rolls. It cannot be used when printing on sheets. • During banner printing, settings for conserving paper, number of copies, borderless printing, enlargement or reduction, and other layout-related settings are disregarded. 1. 2. Select the printer in Chooser. 3. 4.
Tiling and multiple pages per sheet 9. 10. 11. Access the Finishing pane. Click Roll Paper (Banner) in the A Media Source list. Conrm the print settings, and then click N Print to start printing. Note • For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.
Tiling and multiple pages per sheet Printing Multiple Pages Per Sheet To conserve paper, you can print several pages of the original on a single sheet by reducing the original and dividing the sheet into areas for each page. Page Layout Specify a number of pages of the original to print on a single sheet, in a layout of multiple pages per sheet. Note • You can print up to 16 pages of the original on a single sheet. • You can also change the page layout order and print page boundary lines, as desired.
Tiling and multiple pages per sheet Printing Multiple Pages Per Sheet (Windows) This topic describes how to print four pages of originals together on a single sheet based on the following example. • • • • • Document: Any Type Page size: A3 (297.0×420.0 mm [11.7×16.5 in]) Paper: Roll Paper type: Plain Paper Roll paper width: A2/A3 roll (420.0 mm [16.5 in]) 1. 2. 3. Choose Print in the application menu. 4. 5. 6. In the A Media Type list, select the type of paper that is loaded.
Tiling and multiple pages per sheet 9. Select the width of the loaded roll in the M Roll Paper Width list-in this case, ISO A2/A3 Roll (420.0mm). 10. Click the Layout tab to display the Layout sheet. 11. 12. Select the A Page Layout check box. Click 4 Pages/Sheet in the B Page Layout list. Note • You can select the layout order for placing four pages on a sheet and a frame border in the Page Layout Printing dialog box by clicking C Set. 13. Conrm the print settings and print as desired.
Tiling and multiple pages per sheet Printing Multiple Pages Per Sheet (Mac OS X) This topic describes how to print four pages of originals together on a single sheet based on the following example. • • • • • Document: Any Type Page size: A3 (297.0 × 420.0 mm [11.7 × 16.5 in]) Paper: Roll Paper type: Plain Paper Roll paper width: A2/A3 roll (420.0 mm [16.5 in]) 1. Choose Page Setup in the application menu to display the Page Attributes dialog box. 2. 3. 4. 5. 6.
Tiling and multiple pages per sheet 8. Access the Main pane. 9. 10. 11. In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper. 12. Click Roll Paper in the A Media Source list. Select the printing application in the E Print Target list. Access the Page Setup pane.
Tiling and multiple pages per sheet 13. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, ISO A2/A3 (420.0mm). Note • If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on the Main pane and update the printer information. 14. Make sure C Page Size shows the original size as specied in C Paper Size in the Page Attributes dialog box-in this case, ISO A3. 15.
Tiling and multiple pages per sheet Printing Multiple Pages Per Sheet (Mac OS 9) This topic describes how to print four pages of originals together on a single sheet based on the following example. • • • • • Document: Any Type Page size: A3 (297.0 × 420.0 mm [11.7 × 16.5 in]) Paper: Roll Paper type: Plain Paper Roll paper width: A2/A3 roll (420.0 mm [16.5 in]) 1. 2. Select the printer in Chooser. 3. 4. 5. 6. In the A Page Size list, click the size of the original. In this case, click ISO A3. 7. 8.
Tiling and multiple pages per sheet 9. 10. 11. Access the Page Setup pane. Select the I Page Layout check box. Click 4 Pages/Sheet in the I Page Layout list. Note • You can choose the layout order and specify a boundary line for the four pages in J Layout Direction and K Page Border. 12. Access the Finishing pane. 13. Click Roll Paper in the A Media Source list.
Tiling and multiple pages per sheet 14. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, ISO A2/A3 (420.0mm). Note • If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer on the Main pane and update the printer information. 15. Conrm the print settings, and then click N Print to start printing. Note • For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.
Tiling and multiple pages per sheet Printing Posters in Sections You can enlarge an original to print it in sections on several sheets. By assembling the printed sheets, you can create a poster larger than the maximum supported paper size of the printer. Page Layout Choose poster printing. For instructions on printing large posters, refer to the following topics, as appropriate for your computer and operating system. • Printing Large Posters (Windows) (→P.338) • Printing Large Posters (Mac OS 9) (→P.
Tiling and multiple pages per sheet Printing Large Posters (Windows) You can enlarge an original to print it in sections on several sheets. By assembling the printed sheets, you can create a poster larger than the maximum supported paper size of the printer. This topic describes how to enlarge an A2 original for printing it in sections on four sheets, based on the following example. • • • • • Document: Poster Page size: A2 (420.0×594.0 mm [16.5 × 23.
Tiling and multiple pages per sheet 8. 9. 10. 11. Click Cut Sheet in the L Paper Source list. Click the Layout tab to display the Layout sheet. Select the A Page Layout check box. Click Poster (2 x 2) in the B Page Layout list. Note • Follow the steps below to print only a portion of the poster as divided for printing. 1. Click C Set under B Page Layout to display the Pages to Print dialog box. 2. On the Pages to Print dialog box, clear the check boxes of the portion you do not want to print. 3.
Tiling and multiple pages per sheet Printing Large Posters (Mac OS 9) You can enlarge an original to print it in sections on several sheets. By assembling the printed sheets, you can create a poster larger than the maximum supported paper size of the printer. This topic describes how to enlarge an A2 original for printing it in sections on four sheets, based on the following example. • • • • • Document: Poster Page size: A2 (420.0 × 594.0 mm [16.5 × 23.
Tiling and multiple pages per sheet 11. Access the Page Setup pane. 12. 13. 14. 15. Select the I Page Layout check box. 16. 17. Click Cut Sheet in the A Media Source list. Click Poster (2 x 2) in the I Page Layout list. In the Pages to Print dialog box, clear the check boxes of any portion you do not want to print. Access the Finishing pane. Conrm the print settings, and then click N Print to start printing. Note • For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”.
Centering originals Centering originals Printing Originals Centered on Rolls You can print originals centered on a page-for example, if the paper is larger than the original, or if you are reducing the original. Centering originals relative to roll paper width If you use originals smaller than the roll paper width, you can center them relative to the width when printing. Print Centered Aligns the center of the original with the center of the roll, relative to the width.
Centering originals Printing Originals Centered on Rolls (Windows) This topic describes how to center originals before printing on rolls based on the following example. • • • • • Document: Any type Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in) Paper: Roll Paper type: Plain Paper Roll width: A3/A4 roll (297.0 mm [11.7 in]) 1. 2. 3. Choose Print in the application menu. 4. 5. 6. In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper. 7.
Centering originals 9. Select the width of the loaded roll in the M Roll Paper Width list-in this case, ISO A3/A4 Roll (297.0mm). 10. Click the Layout tab to display the Layout sheet. 11. 12. Select the G Print Centered check box. Conrm the print settings and print as desired. Note • For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.
Centering originals Printing Originals Centered on Rolls (Mac OS X) This topic describes how to center originals before printing on rolls based on the following example. • • • • • Document: Any type Page size: A4 (210.0×297.0mm)/Letter (8.3 × 11.7 in) Paper: Roll Paper type: Plain Paper Roll paper width: A3/A4 roll (297.00 mm [11.7 in]) 1. Choose Page Setup from the application menu to display the Page Attributes dialog box. 2. 3. 4. 5. 6. Select the print target in the B Format for list. 7. 8.
Centering originals 9. 10. 11. Access the Page Setup pane. Click Roll Paper in the A Media Source list. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, 10-in. Roll. Note • If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on the Main pane and update the printer information.
Centering originals 12. Make sure the C Page Size setting matches the original size as selected in C Paper Size in the Page Attributes dialog box-in this case, ISO A4. 13. 14. Select the J Print Centered check box. Conrm the print settings, and click M Print to start printing. Note • For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.
Centering originals Printing Originals Centered on Rolls (Mac OS 9) This topic describes how to center originals before printing on rolls based on the following example. • • • • • Document: Any type Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in) Paper: Roll Paper type: Plain Paper Roll paper width: A3/A4 roll (297.0 mm [11.7 in]) 1. 2. Select the printer in Chooser. 3. 4. 5. 6. In A Page Size, click the size of the original. In this case, click ISO A4. 7. 8.
Centering originals 9. 10. Access the Page Setup pane. Make sure the B Page Size setting matches the original size as selected in A Page Size in the Page Attribute dialog box-in this case, ISO A4. 11. Access the Finishing pane. 12. Click Roll Paper in the A Media Source list.
Centering originals 13. Make sure the width of the loaded roll is displayed in B Roll Paper Width -in this case, ISO A3/A4 (297.0mm). Note • If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer on the Main pane and update the printer information. 14. 15. Select the F Print Centered check box. Conrm the print settings, and click N Print to start printing. Note • For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.
Centering originals Printing Originals Centered on Sheets You can print originals centered on a page-for example, if the paper is larger than the original, or if you are reducing the original. Centering originals on sheets If you use paper larger than the original size or print originals after reduction, the printed images may be aligned in the upper-left corner of the paper. In this case, you can center originals on sheets when printing.
Centering originals Printing Originals Centered on Sheets (Windows) This topic describes how to reduce an original 50 0.000000or printing centered on a sheet. • • • • • Document: Any Type Page size: A4 (210.0 × 297.0 mm)/Letter (8.3 × 11.7 in) Paper: Sheets Paper type: Plain Paper Paper size: A4 (210.0 × 297.0 mm)/Letter (8.3 × 11.7 in) 1. 2. 3. Choose Print in the application menu. 4. 5. 6. In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper. 7.
Centering originals 9. 10. 11. 12. Click Match Page Size in the G Paper Size list. 13. 14. Select the G Print Centered check box. Click F Scaling and enter “50.” Click Cut Sheet in the L Paper Source list. Click the Layout tab to display the Layout sheet. Conrm the print settings and print as desired. Note • For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.
Centering originals Printing Originals Centered on Sheets (Mac OS X) This topic describes how to center originals for printing on sheets, based on the following example. • • • • • Document: Any type Page size: A4/Letter Paper: Sheets Paper type: Plain Paper Paper size: Non-standard 1. Choose Page Setup from the application menu to display the Page Attributes dialog box. 2. 3. 4. 5. In the C Paper Size list, click the size of the original. In this case, click ISO A4. 6. 7.
Centering originals 8. 9. 10. Access the Page Setup pane. Click Cut Sheet in the A Media Source list. Make sure C Page Size shows the original size as specied in C Paper Size in the Page Attributes dialog box-in this case, ISO A4. 11. 12. Select the J Print Centered check box. Conrm the print settings, and then click M Print to start printing. Note • For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.
Centering originals Printing Originals Centered on Sheets (Mac OS 9) This topic describes how to center originals for printing on sheets, based on the following example. • • • • • Document: Any type Page size: A4/Letter Paper: Sheets ( Manual ) Paper type: Plain Paper Paper size: Non-standard 1. Choose Page Setup from the source application menu to display the Page Attribute dialog box. 2. 3. 4. 5. In the A Page Size list, click the size of the original. In this case, click ISO A4. 6. 7.
Centering originals 8. Access the Page Setup pane. 9. Make sure B Page Size shows the original size as specied in Page Setup in the Page Attribute dialog box-in this case, ISO A4. 10. Access the Finishing pane. 11. 12. Click Cut Sheet in the A Media Source list. Select the F Print Centered check box.
Centering originals 13. Conrm the print settings, and then click N Print to start printing. Note • For tips on conrming print settings, see “Conrming Print Settings (Mac OS 9)”. (→P.478) Important • If you have selected Cut Sheet as the media source, follow the instructions on the printer control panel to enter the paper size.
Conserving roll paper Conserving roll paper Conserving Roll Paper by Rotating Originals 90 Degrees You can conserve roll paper by specifying particular settings as suitable for your original. Rotate Page 90 degrees (Conserve Paper) When originals are printed in portrait orientation, the original is rotated 90 degrees before printing if it ts within the roll width. This enables you to conserve paper.
Conserving roll paper Conserving Roll Paper by Rotating Originals 90 Degrees (Windows) This topic describes how to conserve paper by rotating originals 90 degrees before printing, based on the following example. • • • • • Document: Any type Page size: A4 (210.0×297.0 mm)/Letter (8.3×11.7 in) Paper: Roll Paper type: Plain Paper Roll paper width: A3/A4 roll (297.0 mm [11.7 in]) This example illustrates how to rotate an A4 (210.0×297.0 mm)/Letter (8.3×11.
Conserving roll paper 6. In the A Page Size list, click the size of the original as specied in the application. In this case, click ISO A4 or Letter (8.5"x11"). 7. 8. Click Roll Paper in the L Paper Source list. Select the width of the loaded roll in the M Roll Paper Width list-in this case, ISO A3/A4 Roll (297.0mm). 9. 10. Select the K Rotate Page 90 degrees (Conserve Paper) check box. Conrm the print settings and print as desired.
Conserving roll paper Conserving Roll Paper by Rotating Originals 90 Degrees (Mac OS X) This topic describes how to conserve roll paper by rotating originals 90 degrees before printing, based on the following example. • • • • • Document: Any type Page Size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in) Paper: Roll Paper type: Plain Paper Roll paper width: A3/A4 roll (297.0 mm [11.7 in]) This example illustrates how to rotate an A4 (210.0×297.0 mm)/Letter (8.3 × 11.
Conserving roll paper 8. 9. 10. Access the Page Setup pane. Click Roll Paper in the A Media Source list. Make sure the width of the loaded roll is displayed in B Roll Paper Width -in this case, ISO A3/A4 (297.0mm). Note • If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on the Main pane and update the printer information.
Conserving roll paper 11. Make sure the C Page Size setting matches the original size as selected in C Paper Size in the Page Attributes dialog box-in this case, ISO A4. 12. 13. Select the L Rotate Page 90 degrees check box. Conrm the print settings, and then click M Print to start printing. Note • For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.
Conserving roll paper Conserving Roll Paper by Rotating Originals 90 Degrees (Mac OS 9) This topic describes how to conserve roll paper by rotating originals 90 degrees before printing, based on the following example. • • • • • Document: Any type Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in) Paper: Roll Paper type: Plain Paper Roll width: A3/A4 roll (297.0 mm [11.7 in]) This example illustrates how to rotate an A4 (210.0×297.0 mm)/Letter (8.3 × 11.
Conserving roll paper 8. 9. 10. Access the Finishing pane. Click Roll Paper in the A Media Source list. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, ISO A3/A4 (297.0mm). Note • If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer on the Main pane and update the printer information. 11. 12. Select the I Rotate Page 90 degrees check box. Conrm the print settings, and then click N Print to start printing.
Conserving roll paper Conserving Roll Paper by Printing Originals Without Top and Bottom Margins You can conserve roll paper by specifying particular settings as suitable for your original. No Spaces at Top or Bottom (Conserve Paper) You can print without feeding the paper for blank portions of originals if there are top and bottom margins in originals. This enables you to conserve as much paper as the size of the margins.
Conserving roll paper Conserving Roll Paper by Printing Originals Without Top and Bottom Margins (Windows) This topic describes how to conserve roll paper when printing originals that have a top and bottom margin, based on the following example. • • • • • Document: Any type Page size: A4 (210.0×297.0mm)/Letter (8.3 × 11.7 in) Paper: Roll Paper type: Plain Paper Roll paper width: A3/A4 roll (297.0 mm [11.7 in]) 1. 2. 3. Choose Print in the application menu. 4. 5.
Conserving roll paper 8. Select the width of the loaded roll in the M Roll Paper Width list-in this case, ISO A3/A4 Roll (297.0mm). 9. 10. 11. Click the Layout tab to display the Layout sheet. Select the I No Spaces at Top or Bottom (Conserve Paper) check box. Conrm the print settings and print as desired. Note • For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.
Conserving roll paper Conserving Roll Paper by Printing Originals Without Top and Bottom Margins (Mac OS X) This topic describes how to conserve roll paper when printing originals that have a top and bottom margin, based on the following example. • • • • • Document: Any type Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in) Paper: Roll Paper type: Plain Paper Roll paper width: A3/A4 roll (297.0 mm [11.7 in]) 1. Choose Page Setup from the application menu to display the Page Attributes dialog box.
Conserving roll paper 8. 9. 10. Access the Page Setup pane. Click Roll Paper in the A Media Source list. Make sure the width of the loaded roll is displayed in B Roll Paper Width -in this case, ISO A3/A4 (297.0mm). Note • If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on the Main pane and update the printer information.
Conserving roll paper 11. Make sure the C Page Size setting matches the original size as selected in C Paper Size in the Page Attributes dialog box-in this case, ISO A4. 12. 13. Select the K No Spaces at Top or Bottom check box. Conrm the print settings, and click M Print to start printing. Note • For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.
Conserving roll paper Conserving Roll Paper by Printing Originals Without Top and Bottom Margins (Mac OS 9) This topic describes how to conserve roll paper when printing originals that have a top and bottom margin, based on the following example. • • • • • Document: Any type Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in) Paper: Roll Paper type: Plain Paper Roll paper width: A3/A4 roll (297.0 mm [11.7 in]) 1. 2. Select the printer in Chooser. 3. 4. 5. 6.
Conserving roll paper 8. 9. 10. Access the Finishing pane. Click Roll Paper in the A Media Source list. Make sure the width of the loaded roll is displayed in B Roll Paper Width -in this case, ISO A3/A4 (297.0mm). Note • If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer on the Main pane and update the printer information. 11. 12. Select the H No Spaces at Top or Bottom check box. Conrm the print settings, and click N Print to start printing.
Checking Images Before Printing Checking Images Before Printing Checking the Layout in a Preview Before Printing You can check the print layout on the preview screen. Open Preview When Print Job Starts (Windows) While viewing the preview screen, you can also adjust orientation or other settings, and your changes will be instantly applied on the preview screen. Note • Under some settings and in some environments, PageComposer may be started.
Checking Images Before Printing Preview (Macintosh) While viewing the preview screen, you can also adjust layout or size settings, and your changes will be instantly applied on the preview screen. Important • The driver must be installed from the User Software CD-ROM to use this function. For instructions on how to check the layout before printing, refer to the following topics: • Checking the Layout in a Preview Before Printing (Windows) (→P.377) • Checking the Layout Before Printing (Mac OS X) (→P.
Checking Images Before Printing Checking the Layout in a Preview Before Printing (Windows) This topic describes how to preview images of print jobs before actually printing them. 1. 2. 3. Choose Print in the application menu. 4. 5. Select the L Open Preview When Print Job Starts check box. Select the printer in the dialog box, and then display the printer driver dialog box. (→P.417) Make sure the Main sheet is displayed.
Checking Images Before Printing 6. 7. On the main window, you can check the layout and change settings as needed. To print, click Start Printing in the File menu. Note • For details on imagePROGRAF Preview functions, see Preview .
Checking Images Before Printing Checking the Layout Before Printing (Mac OS X) This topic describes how to check the layout before printing using the Preview function. 1. 2. Choose Print in the application menu. 3. The Canon imagePROGRAF Preview window is displayed. 4. 5. Check the layout and adjust settings in the Canon imagePROGRAF Preview window as desired. Click PDF and select Canon imagePROGRAF Preview. Print from the Canon imagePROGRAF Preview menu.
Checking Images Before Printing Previewing Images Before Printing (Mac OS 9) This topic describes how to preview images of print jobs before actually printing them. 1. 2. 3. In the application menu, choose Print. Click Preview to open the preview window. Check the layout and other aspects of the printing image, and then click Print this page to start printing. Note • “Preview” is provided as a standard feature of the operating system. For details, refer to the Mac OS documentation.
Other useful settings Other useful settings Printing With Watermarks You can add watermarks (background images) to documents that require special handling. Watermark Watermarks are applied to all pages of your document. Important • Watermarks are not printed if you select poster as the type of page layout.
Other useful settings Printing with Watermarks-COPY, FILE COPY, and so on (Windows) This topic describes how to print ofce documents with a watermark (in this case, “FILE COPY”) based on the following example. • • • • • Document: CAD drawing Page size: A2 (420.0 × 594.0 mm [16.5 × 23.4 in]) Paper: Roll Paper type: Plain Paper Roll paper width: A2/A3 roll (420.0 mm [16.5 in]) 1. 2. 3. Choose Print in the application menu. 4. 5. In the A Media Type list, select the type of paper that is loaded.
Other useful settings 6. Click the Page Setup tab to display the Page Setup sheet. 7. In A Page Size, click the size of the original as specied in the application software. In this case, click ISO A4 or Letter (8.5"x11"). 8. 9. Click Roll Paper in the L Paper Source list. Select the width of the loaded roll in the M Roll Paper Width list-in this case, ISO A2/A3 Roll (420.0mm). 10. Click the Layout tab to display the Layout sheet. 11. 12. Select the D Watermark check box.
Other useful settings Printing with Watermarks-COPY, FILE COPY, and so on (Mac OS 9) This topic describes how to print ofce documents with a watermark (in this case, “FILE COPY”) based on the following example. • • • • • Document: CAD drawing Page size: A2 (420.0 × 594.0 mm [16.5 × 23.4 in]) Paper: Roll Paper type: Plain Paper Roll paper width: A2/A3 roll (420.0 mm [16.5 in]) 1. 2. Select the printer in Chooser. 3. 4. 5. 6. In the A Page Size list, click the size of the original.
Other useful settings 8. After conrming that E Easy Settings is selected, click CAD (Line Drawing) in the F Print Target list. Note • You can check the settings values selected in the F Print Target list by clicking G View set.. 9. 10. 11. Access the Finishing pane. Click Roll Paper in the A Media Source list. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, ISO A2/A3 (420.0mm).
Other useful settings 12. 13. Select the C Watermark check box. Click FILE COPY in the D Watermarks list. Note • To create your own, original watermark, click E Edit Watermark. Refer to the printer driver help for instructions on modifying watermarks to create your own. 14. Specify additional printing conditions. For details on available printing conditions, see “Printer Driver Settings (Mac OS 9)”. (→P.475) 15. Conrm the print settings, and then click N Print to start printing.
Other useful settings Making the Original Orientation Match the Paper Orientation You can specify the original orientation to match the orientation of the paper for printing. Orientation Paper is usually loaded in the printer in portrait orientation. When you have an original in landscape orientation, you can specify the printing orientation so that the original is printed in landscape orientation. Rotate 180 degrees The original is rotated 180 degrees to print it upside down.
Other useful settings Making the Original Orientation Match the Paper Orientation (Windows) This topic describes how to print an original in landscape orientation after matching the paper orientation, based on the following example. • • • • • Document: An original in landscape orientation Page size: A4 (210.0 × 297.0 mm)/Letter (8.3 × 11.7 in) Paper: Roll Paper type: Plain Paper Roll paper width: A2/A3 roll (420.0 mm [16.5 in]) 1. 2. 3. Choose Print in the application menu. 4. 5. 6.
Other useful settings 8. 9. 10. In H Orientation, click J Landscape. Click Roll Paper in the L Paper Source list. Select the width of the loaded roll in the M Roll Paper Width list-in this case, ISO A2/A3 Roll (420.0mm). 11. Conrm the print settings and print as desired. Note • For tips on conrming print settings, see “Conrming Print Settings (Windows)”. (→P.
Other useful settings Making the Original Orientation Match the Paper Orientation (Mac OS X) This topic describes how to print an original in landscape orientation after matching the paper orientation, based on the following example. • • • • • Document: An original in landscape orientation Page size: A4 (210.0 × 297.0 mm)/Letter (8.3 × 11.7 in) Paper: Roll Paper type: Plain Paper Roll paper width: A2/A3 roll (420.0 mm [16.5 in]) 1.
Other useful settings 10. Access the Page Setup pane. 11. 12. Click Roll Paper in the A Media Source list. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, ISO A2/A3 (420.0mm). Note • If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer Information on the Main pane and update the printer information.
Other useful settings 13. Make sure the C Page Size setting matches the original size as selected in C Paper Size in the Page Attributes dialog box-in this case, ISO A4. 14. Conrm the print settings, and then click M Print to start printing. Note • For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P.
Other useful settings Making the Original Orientation Match the Paper Orientation (Mac OS 9) This topic describes how to print an original in landscape orientation after matching the paper orientation, based on the following example. • • • • • Document: An original in landscape orientation Page size: A4 (210.0 × 297.0 mm)/Letter (8.3 × 11.7 in) Paper: Roll Paper type: Plain Paper Roll paper width: A2/A3 roll (420.0 mm [16.5 in]) 1. 2. Select the printer in Chooser. 3. 4. 5. 6. 7.
Other useful settings 10. Access the Finishing pane. 11. 12. Click Roll Paper in the A Media Source list. Make sure the width of the loaded roll is displayed in the B Roll Paper Width list-in this case, ISO A2/A3 (420.0mm). Note • If the width of the loaded roll is not displayed in B Roll Paper Width, click L Printer on the Main pane and update the printer information. 13. Conrm the print settings, and then click N Print to start printing.
Other useful settings Using Favorites You can register print settings as “favorites” to reuse settings from a particular job that met your expectations, or settings for a particular page size that you will use repeatedly. Favorites Registering a favorite for later use. You can choose the settings you have registered from a list before printing, and you can check the settings details. Note • You can also save the favorite settings as les.
Other useful settings Using Favorites (Windows) This topic describes how to register favorites and print using favorite settings. Registering a favorite Follow the steps below to save the current print settings as a favorite. 1. 2. 3. 4. Choose Print in the application menu. 5. 6. Click H Add to display the Add dialog box. 7. Click OK to close the Add dialog box. Select the printer in the dialog box, and then display the printer driver dialog box. (→P.417) Complete the print settings.
Other useful settings Printing using the favorite Follow the steps below to print using the favorite you have registered. 1. 2. 3. Choose Print in the application menu. 4. In the A Favorites, choose the favorite you registered. Select the printer in the dialog box, and then display the printer driver dialog box. (→P.417) Click the Favorites tab to display the Favorites sheet. Note • To import a favorite, click I Import and specify the favorite le. 5. 6.
Other useful settings Using Favorites (Mac OS X) You can use the Presets function in Mac OS X for favorite-based printing. Note • In the printing dialog box, click Save As in the Presets list to save the current print settings. This is a standard feature of the operating system. For details, refer to the Mac OS documentation.
Other useful settings Using Favorites (Mac OS 9) This topic describes how to register favorites and print using favorite settings. Registering a favorite Follow the steps below to save the current print settings as a favorite. 1. 2. 3. 4. 5. Select the printer in Chooser. 6. Click OK to close the Add Favorite dialog box. Choose Print in the application menu. Complete the print settings. In the Favorites list, click Add Favorite to display the Add Favorite dialog box.
Other useful settings Printing using the favorite Follow the steps below to print using the favorite you have registered. 1. 2. Select the printer in Chooser. 3. 4. 5. 6. Choose the original size in the A Page Size list. Choose Page Setup from the application menu to display the Page Attribute dialog box. Click I OK to close the dialog box. In the application menu, choose Print. In the Favorites list, choose the favorite you registered.
Other useful settings Cutting Roll Paper After Printing Roll paper can be automatically cut after printing. Note • It may not be possible to cut certain types of paper, such as adhesive paper. For details on types of paper that cannot be used with the auto cut feature, see the Paper Reference Guide. (→P.95) Automatic Cutting Roll paper is cut automatically after printing. If you prefer, you can print continuously without cutting the roll, or you can print a cut line.
Other useful settings Cutting Roll Paper After Printing (Windows) This topic describes how to cut roll paper automatically (using the auto cut function) after printing, as well as how to print a cut line to cut the paper manually. Note • Auto cut function is activated on the printer by factory default and when the printer driver is installed. Follow the steps below to reactivate the function after it is disabled, or to change the setting for printing a cut line instead. 1. 2. 3.
Other useful settings Cutting Roll Paper After Printing (Mac OS X) This topic describes how to cut roll paper automatically (using the auto cut function) after printing, as well as how to print a cut line to cut the paper manually. Note • The auto cut function is activated on the printer by factory default and when the printer driver is installed. Follow the steps below to reactivate the function once disabled, or select the setting for printing a cut guideline instead. 1.
Other useful settings 8. Access the Main pane. 9. 10. In the A Media Type list, select the type of paper that is loaded. 11. To enable automatic cutting, click Printer Default in the H Automatic Cutting list. If you prefer Click C Set to display the Media Detailed Settingsdialog box. to cut the paper later yourself, click Print Cut Guideline. Important • If the automatic cut function has been deactivated on the printer, change the auto cut setting on the printer Control Panel. 12. 13.
Other useful settings Cutting Roll Paper After Printing (Mac OS 9) This topic describes how to cut roll paper automatically (using the auto cut function) after printing, as well as how to print a cut line to cut the paper manually. Note • The auto cut function is activated on the printer by factory default and when the printer driver is installed. Follow the steps below to reactivate the function once disabled, or select the setting for printing a cut guideline instead. 1. 2.
Other useful settings 8. Access the Main pane. 9. 10. In the C Media Type list, select the type of paper that is loaded. 11. To enable automatic cutting, click Printer Default in the H Automatic Cutting list. If you prefer Click D Set to display the Media Detailed Settingsdialog box. to cut the paper later yourself, click Print Cut Guideline. Important • If the automatic cut function has been deactivated on the printer, change the auto cut setting on the printer Control Panel. 12. 13.
Printer Driver Windows Software Printer Driver Printer Driver Settings (Windows) For instructions on accessing the Windows printer driver, refer to the following topics. • Accessing the Printer Driver Dialog Box from Applications (Windows) (→P.417) • Accessing the Printer Driver Dialog Box from the Operating System Menu (Windows) (→P.419) For information on the Windows printer driver settings, refer to the following topics. • Main Sheet (Windows) (→P.
Printer Driver • Utility Sheet (Windows) (→P.442) You can specify settings related to maintenance for the Printhead and feed amount, as well as settings for Color imageRUNNER Enlargement Copy. • Support Sheet (Windows) (→P.443) You can view support information and the user manual. • Device Settings Sheet (Windows) (→P.444) You can display settings for optional equipment installed on the printer and see the printer driver version.
Printer Driver Specifying Paper in the Printer Driver (Windows) If you have replaced the paper, you must complete the following settings in the printer driver. Important • Always specify the same type and size of paper in the printer menu and printer driver. If the type and size do not match, an error message will be displayed and printing is not possible. 1. 2. 3. Choose Print in the application menu. 4. 5. In the A Media Type list, select the type of paper that is loaded. 6. 7.
Printer Driver 8. If you have selected Roll Paper in L Paper Source, select the width of the loaded roll in M Roll Paper Width. Note • A variety of settings are available in the printer driver to suit different printing applications. For details on available printing conditions, see “Printer Driver Settings (Windows)”. (→P.
Printer Driver Conrming Print Settings (Windows) There are two ways to conrm the print settings, as follows. • Checking a preview of the settings (→P.411) • Checking a print preview (→P.412) Checking a preview of the settings A preview of the settings is displayed on the left side of the Main, Page Setup, and Layout sheets. By checking illustrations and numerical values in the preview, you can conrm current settings for the page size, orientation, paper source, layout, and so on.
Printer Driver Checking a print preview You can check an image of the original just as it will be printed. When you activate this feature, imagePROGRAF Preview or PageComposer is started before printing. Conrming how documents will be printed this way helps prevent printing errors. For details on print previews, see “Checking the Layout in a Preview Before Printing”. (→P.
Printer Driver Checking the Layout in a Preview Before Printing (Windows) This topic describes how to preview images of print jobs before actually printing them. 1. 2. 3. Choose Print in the application menu. 4. 5. Select the L Open Preview When Print Job Starts check box. Select the printer in the dialog box, and then display the printer driver dialog box. (→P.417) Make sure the Main sheet is displayed. After you click OK, when you print a job, the imagePROGRAF Preview window will be displayed.
Printer Driver 6. 7. On the main window, you can check the layout and change settings as needed. To print, click Start Printing in the File menu. Note • For details on imagePROGRAF Preview functions, see Preview .
Printer Driver Using Favorites (Windows) This topic describes how to register favorites and print using favorite settings. Registering a favorite Follow the steps below to save the current print settings as a favorite. 1. 2. 3. 4. Choose Print in the application menu. 5. 6. Click H Add to display the Add dialog box. 7. Click OK to close the Add dialog box. Select the printer in the dialog box, and then display the printer driver dialog box. (→P.417) Complete the print settings.
Printer Driver Printing using the favorite Follow the steps below to print using the favorite you have registered. 1. 2. 3. Choose Print in the application menu. 4. In the A Favorites, choose the favorite you registered. Select the printer in the dialog box, and then display the printer driver dialog box. (→P.417) Click the Favorites tab to display the Favorites sheet. Note • To import a favorite, click I Import and specify the favorite le. 5. 6.
Printer Driver Accessing the Printer Driver Dialog Box from Applications (Windows) 1. 2. Choose Print from the File menu to display the dialog box for printing conditions. Select the printer, and then display the printer driver dialog box. Note • The dialog box for specifying printing conditions varies depending on the source application. In some cases, when you select the printer, a sheet for conguring the printer driver is added to the dialog box. In the following case, click Preferences.
Printer Driver Important • If you access the printer driver dialog box from the source application, changes you make to the settings will only apply temporarily to that application. Because these are sizes you specify temporarily in the printer driver, the sizes will not be available after you exit the application. • You can also access the printer driver dialog box from the Windows system menu. see “Accessing the Printer Driver Dialog Box from the Operating System Menu (Windows)”. (→P.
Printer Driver Accessing the Printer Driver Dialog Box from the Operating System Menu (Windows) 1. 2. Click start > Printers and Faxes (or Printers ). 3. Click Printing Preferences to display the Printing Preferences dialog box, titled with the Select the printer, and then display the printer properties dialog box. name of this printer. Note • The Device Settings sheet is also an extension of the printer driver. (→P.
Printer Driver Six sheets of print settings are displayed by the printer driver: Main, Page Setup, Layout, Favorites, Utility, and Support. Important • If you access the printer driver dialog box from the operating system menu, changes you make to the settings will apply to all applications you use for printing. • You can also access the printer driver dialog box from applications. see “Accessing the Printer Driver Dialog Box from Applications (Windows)”. (→P.
Printer Driver Main Sheet (Windows) The following settings are available on the Main sheet. For details on settings items, refer to the printer driver help le. Note • On the Main sheet, choose Easy Settings to specify basic print settings based on the particular printing application, or switch to Advanced Settings to complete more detailed settings as desired. Conguration using Easy Settings Setting Item A Media Type Description Select the type of paper.
Printer Driver Setting Item Description M Status Monitor Click to start imagePROGRAF Status Monitor, which enables you to conrm the status of the printer and print jobs. You can also set up email notication if printer errors occur by completing the Email Notice settings. For details, refer to the Status Monitor help le. N About Click to conrm version information for the printer driver. S Defaults Click to restore all settings on the sheet to the default values.
Printer Driver Setting Item Description I Thicken Fine Lines Activate this option to print ne lines more distinctly. J Unidirectional Printing Although unidirectional printing is slower, it can help prevent misaligned lines and ensure better results. K Sharpen Text Activate this option to print text more sharply. T Economy Printing When this mode is selected, less ink is consumed than in regular printing, but the quality is diminished.
Printer Driver Paper Information on Printer Dialog Box (Windows) On the Paper Information on Printer dialog box, you can obtain information on the paper in the printer and congure printer driver settings for the paper source and media type. Note • To display the Paper Information on Printer dialog box, on the Main sheet, click Get Information by Media Type. (→P.
Printer Driver Media Detailed Settings Dialog Box (Windows) The Paper Detailed Settings dialog box offers the following settings. For details on settings items, refer to the printer driver help. Note • To display the Paper Detailed Settings dialog box, on the Main sheet, click Settings by Media Type. (→P.421) Setting Item Description A Media Type Select the paper type. For information on the types of paper the printer supports, refer to the Paper Reference Guide. (→P.
Printer Driver View Settings Dialog Box for the Printing Application (Windows) In the View Settings dialog box, you can check details of the selected printing application. Note • To display the View Settings dialog box, on the Main sheet, click View Settings by Print Target. (→P.421) Setting Item Description A Print Target Shows all Print Target options (settings items for the printing application). B Name Identies the item selected in Print Target by its name and an icon.
Printer Driver Color Adjustment Sheet: Color (Windows) If the color tone as printed is not as you expected, you can adjust it on the Color Adjustment sheet. Note • To display the Color Adjustment sheet, on the Main sheet, click Color Settings by Color Mode in Advanced Settings. (→P.421) Setting Item Description A Sample Type Choose a sample image from Standard, Portrait, Landscape, or Graphics. B View Color Pattern Clicking to select this check box will display the color pattern.
Printer Driver Note • For details on settings items, see “Adjusting the Color in the Printer Driver”. (→P.178) Object Adjustment dialog box In the Object Adjustment dialog box, you can specify what type of print jobs to apply color adjustment to. If an original comprises images, graphics, and text, you can specify which portion to apply color adjustment to. Note • To display the Object Adjustment dialog box, click Object Adjustment on the Color Adjustment sheet.
Printer Driver Matching Sheet (Windows) On the Matching sheet, you can specify color matching to compensate for differences in the appearance of colors on various devices. Driver Matching Mode The following options are available when you select Driver Matching Mode in the Matching Mode list. Note • To display the Matching sheet, on the Main sheet, click Color Settings by Color Mode in Advanced Settings, and then click the Matching sheet. (→P.
Printer Driver ICC Matching Mode, Driver ICM Mode and Host ICM Mode On the Matching sheet, you can specify color matching to compensate for differences in the appearance of colors on various devices. The following options are available when you select ICC Matching Mode, Driver ICM Mode, or Host ICM Mode on the Matching Mode sheet. Note • To display the Matching sheet, on the Main sheet, click Color Settings by Color Mode in Advanced Settings, and then click the Matching sheet. (→P.
Printer Driver Color Adjustment Sheet: Monochrome (Windows) On the Color Adjustment sheet for monochrome printing, you can adjust the brightness and contrast. Note • To display the Color Adjustment sheet, on the Main sheet, click Color Settings by Color Mode in Advanced Settings. (→P.421) Setting Item Description A Sample Type Choose a sample image from Standard, Portrait, Landscape, or Graphics. B View Color Pattern Clicking to select this check box will display the color pattern.
Printer Driver Note • For details on settings items, see “Adjusting the Color in the Printer Driver”. (→P.178) Object Adjustment dialog box In the Object Adjustment dialog box, you can specify what type of print jobs to apply color adjustment to. If an original comprises images, graphics, and text, you can specify which portion to apply color adjustment to. Note • To display the Object Adjustment dialog box, click Object Adjustment on the Color Adjustment sheet.
Printer Driver Page Setup Sheet (Windows) The following settings are available on the Page Setup sheet. For details on settings items, refer to the printer driver help. Setting Item Description A Page Size Select the page size as specied in the source application. For details on available page sizes, see “Paper Sizes”. (→P.101) B Borderless Printing Borderless printing is available if Roll Paper is selected in the L Paper Source list. Choose from the following options when this setting is activated.
Printer Driver Setting Item Description H Orientation Choose the printing orientation. Making the Original Orientation Match the Paper Orientation (→P.387) K Rotate Page 90 degrees Activate this setting to rotate the document image by 90 degrees before printing. Conserving Roll Paper by Rotating Originals 90 Degrees (→P.359) (Conserve Paper) L Paper Source Choose how paper is supplied. Options displayed in the list vary depending on the selection in Media Type in the Main sheet.
Printer Driver Paper Size Options Dialog Box (Windows) In the Paper Size Options dialog box, you can create and register your own Custom Paper Size. The sizes you dene are listed with standard paper sizes for selection later as needed. Note • To display the Paper Size Options dialog box, on the Page Setup sheet, click Paper Size Options. (→P.433) Setting Item Description A Paper Size List Shows the names and sizes of paper that can be used with the printer driver.
Printer Driver Layout Sheet (Windows) The following settings are available on the Layout sheet. For details on settings items, refer to the printer driver help. Setting Item A Page Layout C Set D Watermark Description Activate this setting to select a particular page layout. Printing Multiple Pages Per Sheet (→P.328) Printing Posters in Sections (→P.337) Printing Multiple Originals Next to Each Other (→P.315) Using PosterArtist to Compose Originals (→P.
Printer Driver Setting Item Description K Page Options Click to display the Page Options dialog box, which enables you to complete settings for printing the user name, date, or page number in the header or footer. M Special Settings If the printing results are not as you expected, click this option to change how printing is processed. S Defaults Click to restore all settings on the sheet to the default values.
Printer Driver Page Options Dialog Box (Windows) The Page Options dialog box offers the following settings. Note • To display the Page Options dialog box, on the Layout sheet, click Page Options. (→P.436) Setting Item Description A Print Date Select where the date is printed, as desired. To print the time as well, select B Print Time Also. C Print User Name Select where the user name is printed, as desired. D Print Page Number Select where the page number is printed, as desired.
Printer Driver Special Settings Dialog Box (Windows) If the printing results are not as you expected, you can change how printing is processed in the Special Settings dialog box. Note • To display the Special Settings dialog box, on the Layout sheet, click Special Settings. (→P.436) Setting Item A FineZoom Settings Description This function is used in large-format printing. Normally, choose Auto.
Printer Driver Favorites Sheet (Windows) The following settings are available on the Favorites sheet. For details on settings items, refer to the printer driver help. Setting Item Description A Favorites Printing favorites you have created are listed with Default Settings favorites. Using Favorites (→P.395) B Settings Details Displays details of the favorite selected in the A Favorites. C Comment Displays notes registered in the favorite.
Printer Driver Setting Item Description K Up Click to move the selected favorite up in the A Favorites list. L Down Click to move the selected favorite down in the A Favorites list.
Printer Driver Utility Sheet (Windows) The following settings are available on the Utility sheet. For details on the utilities, refer to the relevant utility help. Button Corresponding Utility A Maintenance Click to start the imagePROGRAF Status Monitor, which offers the following maintenance for the printer.
Printer Driver Support Sheet (Windows) On the Support sheet, you can view support information and the user’s manual. Button Corresponding Utility A Support Information Click to access the Canon support webpage, where you can nd the latest information on the printer and consumables, check for printer driver updates, and browse other information. B User Manual Click to view the printer user’s manual. This function requires the user’s manual to be installed on your computer.
Printer Driver Device Settings Sheet (Windows) Many settings items on the printer properties sheets are controlled by Windows applications. However, the Device Settings sheet is for conguring the printer, and it is an extension of the printer driver. The following settings are available on the Device Settings sheet. Setting Item A About 444 Windows Software Description You can display version information for the printer driver.
Printer Driver Settings Summaries Dialog Box (Windows) The Settings Summaries dialog box enables you to conrm the settings for the Main, Page Setup, Layout, and Favorites sheets. Button A Copy Corresponding Utility Click to copy the settings information to the clipboard. You can paste the settings information into a le created with a text editor or similar application.
Status Monitor Status Monitor imagePROGRAF Status Monitor (Windows) imagePROGRAF Status Monitor is a utility for checking the printer status and managing print jobs. Two screens are available in imagePROGRAF Status Monitor : “Printer List” shows a list of printers, and “Status Monitor” shows details for each printer. • You can view a list of the printers for which printer drivers have been installed on your computer, printers connected to your computer, and printers found on the network.
Digital Photo Front-Access Digital Photo Front-Access Digital Photo Front-Access Digital Photo Front-Access is an application that links photos from Canon digital cameras and other image les on your computer with various other applications. • Simply select an image and click the icon of the application you want to start to launch the application. • You can also print from Digital Photo Front-Access.
PosterArtist PosterArtist Using PosterArtist to Compose Originals You can print a variety of source documents from word-processing or spreadsheet programs or screen shots from web browsers after composing an original with them using PosterArtist. Important • PosterArtist (sold separately) must be installed to use this function. Edit Using PosterArtist PosterArtist offers a wide range of features, including features to insert source documents in posters and compose an original with them.
PosterArtist Using PosterArtist to Compose Originals (Windows) This topic describes how to use PosterArtist to compose originals from multiple applications, creating a poster layout for printing. Important • PosterArtist (sold separately) must be installed to use this function. 1. 2. 3. Choose Print in the application menu. 4. Click the Layout tab to display the Layout sheet. 5. 6. 7. Select the A Page Layout check box.
PosterArtist 9. Edit and rearrange the image in the PosterArtist window as desired. Important • Without closing the PosterArtist window, repeat steps 1-8 to arrange originals from multiple applications on the same page. Note • For instructions on editing and rearranging images, refer to the PosterArtist Manual. 10. Print from the PosterArtist menu.
Device Setup Utility Device Setup Utility imagePROGRAF Device Setup Utility imagePROGRAF Device Setup Utility is a utility to establish communication between the printer and your computer by completing relevant settings. After the printer is installed, for example, you can use imagePROGRAF Device Setup Utility to complete the network settings initially. • Starting imagePROGRAF Device Setup Utility will show a list of printers found on the network.
Device Setup Utility Conguring the IP Address Using imagePROGRAF Device Setup Utility From a computer running Windows, you can use imagePROGRAF Device Setup Utility provided with the printer to congure the printer’s IP address. This topic describes how to congure the IP address using imagePROGRAF Device Setup Utility. Important • To congure network settings, you must be logged in with administrative rights such as “Administrator” account.
Printer Driver Mac OS X Software Printer Driver Printer Driver Settings (Mac OS X) For instructions on accessing the Mac OS X printer driver, refer to the following topics. • Accessing the Printer Driver Dialog Box from Applications (Mac OS X) (→P.460) For information on the Mac OS X printer driver settings, refer to the following topics. • Main Pane (Mac OS X) (→P.461) You can specify the media type, color processing, print quality, print preview, and other settings.
Printer Driver Specifying Paper in the Printer Driver (Mac OS X) If you have replaced the paper, you must complete the following settings in the printer driver. 1. Choose Page Setup from the application menu to display the Page Attributes dialog box. 2. 3. 4. 5. 6. Select the printer in the B Format for list. 7. In the A Media Type list, select the type of paper that is loaded. Choose the original size in the C Paper Size list. Click F OK to close the dialog box.
Printer Driver 8. 9. 10. Access the Page Setup pane. In the A Media Source list, select how paper is supplied. If you have selected Cut Sheet or Manual in A Media Source, make sure the size as selected in Page Setup is displayed in C Page Size. If you have selected Roll Paper in A Media Source, make sure the width of the loaded roll is displayed in B Roll Paper Width.
Printer Driver Conrming Print Settings (Mac OS X) There are two ways to conrm what printing conditions have been specied, as follows. • Checking a preview of the settings (→P.456) • Checking a print preview (→P.457) Checking a preview of the settings A preview of the settings is displayed on the left side of the Main, Page Setup, Utility, and Additional Settings panes.
Printer Driver Note • To conrm the Print Target specied in Easy Settings, click F View set. on the Main pane to display the View settings dialog box. Checking a print preview You can check an image of the original just as it will be printed. Conrming the image of print jobs beforehand helps prevent printing errors. For details on print previews, see “Checking the Layout in a Preview Before Printing”. (→P.
Printer Driver Checking the Layout Before Printing (Mac OS X) This topic describes how to check the layout before printing using the Preview function. 1. 2. Choose Print in the application menu. 3. The Canon imagePROGRAF Preview window is displayed. 4. 5. Check the layout and adjust settings in the Canon imagePROGRAF Preview window as desired. Click PDF and select Canon imagePROGRAF Preview. Print from the Canon imagePROGRAF Preview menu.
Printer Driver Using Favorites (Mac OS X) You can use the Presets function in Mac OS X for favorite-based printing. Note • In the printing dialog box, click Save As in the Presets list to save the current print settings. This is a standard feature of the operating system. For details, refer to the Mac OS documentation.
Printer Driver Accessing the Printer Driver Dialog Box from Applications (Mac OS X) 1. In the application software, select Print from the File menu to display the dialog box for printing conditions. Note • This dialog box includes basic printing options and enables you to choose the printer, specify the range of pages, number of copies, and so on. 2. Select the printer in the Printer list. 3. Click Print to start printing.
Printer Driver Main Pane (Mac OS X) The following settings are available on the Main pane. For details on settings items, refer to the printer driver help. Note • On the Main pane, choose Easy Settings to specify basic print settings based on the print target, or switch to Advanced Settings to complete more detailed settings as desired. Conguration using Easy Settings Setting Item A Media Type Description Select the paper type.
Printer Driver Conguration using Advanced Settings Setting Item A Media Type B Get Information C Set Description Select the paper type. For information on the types of paper the printer supports, refer to the Paper Reference Guide. (→P.95) Click to display the Get Information dialog box, which shows media types specied on the printer for each media source. When you select a media source, your selection is applied to the printer driver settings for the media source and media type.
Printer Driver Paper Information on Printer Dialog Box (Mac OS X) On the Paper Information on Printer dialog box, you can obtain information on the paper in the printer and congure printer driver media type setting. Note • To display the Paper Information on Printer dialog box, on the Main pane, click Get Information by Media Type. (→P.461) Setting Item A Paper Source Description Shows the Paper Source supported by the printer, as well as the type of paper loaded.
Printer Driver Media Detailed Settings Dialog Box (Mac OS X) The Paper Detailed Settings dialog box offers the following settings. For details on settings items, refer to the printer driver help. Note • To display the Paper Detailed Settings dialog box, on the Main pane, click Settings by Media Type. (→P.461) Setting Item Description A Media Type Select the paper type. For information on the types of paper the printer supports, refer to the Paper Reference Guide. (→P.
Printer Driver View Settings Dialog Box for the Printing Application (Mac OS X) In the View Settings dialog box, you can check details of the selected printing application. Note • To display the View Settings dialog box, on the Main pane, click View Settings by Print Target. (→P.461) Setting Item Description A Print Target Shows all Print Target options (settings items for the printing application). B Name Identies the item selected in Print Target by its name and an icon.
Printer Driver Color Settings Pane: Color (Mac OS X) In general, make any needed adjustments to the color of documents in the application used to create them. However, if the color tone as printed is not as you expected, you can also adjust the color in the printer driver. Color Adjustment pane: color If the color tone as printed is not as you expected, you can adjust it on the Color Adjustment pane.
Printer Driver Note • For details on settings items, see “Adjusting the Color in the Printer Driver”. (→P.178) Matching pane On the Matching pane, you can specify color matching, to compensate for differences in the appearance of colors on various devices. Note • To display the Matching pane, on the Main pane, click Color Settings by Color Mode in Advanced Settings, and then click Matching. (→P.461) Setting Item Description A Matching Mode Select the color matching mode to use, as desired.
Printer Driver Color Settings Pane: Monochrome (Mac OS X) The following settings are available on the Color Settings pane for monochrome printing. Color Adjustment pane: monochrome On the Color Adjustment pane for monochrome printing, you can adjust the brightness and contrast. Note • To display the Color Adjustment pane, on the Main pane, click Color Settings in Advanced Settings. (→P.
Printer Driver Page Setup Pane (Mac OS X) The following settings are available on the Page Setup pane. For details on settings items, refer to the printer driver help. Setting Item Description A Media Source Choose how paper is supplied. Options displayed in the list vary depending on the selection in A Media Type in the Main pane. B Roll Paper Width Displays the paper width of the roll loaded in the printer. Unknown is displayed if the printer cannot detect the roll paper width.
Printer Driver Setting Item Description J Print Centered Activate this setting to print document images in the center of the paper. Printing Originals Centered on Rolls (→P.342) Printing Originals Centered on Sheets (→P.351) K No Spaces at Top or Activate this setting to print the next image skipping blank areas above and below printable data in documents, which enables you to conserve the paper. Conserving Roll Paper by Printing Originals Without Top and Bottom Margins (→P.
Printer Driver Utility Pane (Mac OS X) The following settings are available on the Utilitypane. Setting Item Description A Set Click to display the Printer dialog box, which offers the following maintenance for the printer. • Nozzle (ink ejecting outlet) cleaning • Head alignment adjustment • Feed amount adjustment B View Click to start imagePROGRAF Printmonitor, which enables you to view the status of print jobs.
Printer Driver Additional Settings Pane (Mac OS X) The following settings are available on the Additional Settingspane. Setting Item A Data Send Method 472 Mac OS X Software Description Choose how printing data is sent to the printer.
Printer Driver Support Pane (Mac OS X) On the Support pane, you can view support information and the user’s manual. Button Corresponding Utility A Support Information Click to access the Canon support webpage, where you can nd the latest information on the printer and consumables, check for printer driver updates, and browse other information. B User Manual Click to view the printer user’s manual. This function requires the user’s manual to be installed on your computer.
Printmonitor Printmonitor imagePROGRAF Printmonitor (Macintosh) imagePROGRAF Printmonitor is a utility for checking the printer status and managing print jobs. • • • • Printer status can be checked in real time on a computer monitor. You can check the status of print jobs, cancel jobs, and manage them as needed. If a printer error occurs, you can investigate the corrective action immediately.
Printer Driver Mac OS 9 Software Printer Driver Printer Driver Settings (Mac OS 9) For instructions on accessing the Mac OS 9 printer driver, refer to the following topics. • Accessing the Printer Driver Dialog Box from Applications (Mac OS 9) (→P.483) For information on the Mac OS 9 printer driver settings, refer to the following topics. • Main Pane (Mac OS 9) (→P.484) You can specify the number of copies, page range, media type, color processing, print quality, and print preview.
Printer Driver Specifying Paper in the Printer Driver (Mac OS 9) If you have replaced the paper, you must complete the following settings in the printer driver. 1. 2. Select the printer in Chooser. 3. 4. 5. 6. Choose the original size in the A Page Size list. 7. In the C Media Type list, select the type of paper that is loaded. Choose Page Setup from the application menu to display the Page Attribute dialog box. Click I OK to close the dialog box. Choose Print in the application menu.
Printer Driver 8. 9. 10. Access the Finishing pane. In the A Media Source list, select how paper is supplied. If you have selected Roll Paper in A Media Source, make sure the width of the loaded roll is displayed in B Roll Paper Width. Note • If the width of the roll loaded in the printer is not shown in B Roll Paper Width, click L Printer Information on the Main pane to update the printer information.
Printer Driver Conrming Print Settings (Mac OS 9) There are two ways to conrm what printing conditions have been specied, as follows. • Checking a preview of the settings (→P.478) • Checking a print preview (→P.479) Checking a preview of the settings A preview of the settings is displayed on the left side of the Main, Page Setup, Finishing, Utility, and Additional Settings panes.
Printer Driver Note • To conrm the Print Target specied in Easy Settings, click G View set. on the Main pane to display the View set. dialog box. Checking a print preview You can check an image of the original just as it will be printed. Conrming the image of print jobs beforehand helps prevent printing errors. For details on print previews, see “Previewing Images Before Printing (Mac OS 9)”. (→P.
Printer Driver Previewing Images Before Printing (Mac OS 9) This topic describes how to preview images of print jobs before actually printing them. 1. 2. 3. In the application menu, choose Print. Click Preview to open the preview window. Check the layout and other aspects of the printing image, and then click Print this page to start printing. Note • “Preview” is provided as a standard feature of the operating system. For details, refer to the Mac OS documentation.
Printer Driver Using Favorites (Mac OS 9) This topic describes how to register favorites and print using favorite settings. Registering a favorite Follow the steps below to save the current print settings as a favorite. 1. 2. 3. 4. 5. Select the printer in Chooser. 6. Click OK to close the Add Favorite dialog box. Choose Print in the application menu. Complete the print settings. In the Favorites list, click Add Favorite to display the Add Favorite dialog box.
Printer Driver Printing using the favorite Follow the steps below to print using the favorite you have registered. 1. 2. Select the printer in Chooser. 3. 4. 5. 6. Choose the original size in the A Page Size list. Choose Page Setup from the application menu to display the Page Attribute dialog box. Click I OK to close the dialog box. In the application menu, choose Print. In the Favorites list, choose the favorite you registered. Note • To import a favorite, click Import and specify the favorite le.
Printer Driver Accessing the Printer Driver Dialog Box from Applications (Mac OS 9) 1. In the application software, select Print from the File menu to display the dialog box for printing conditions. Note • This dialog box includes basic printing options and enables you to choose the printer, specify the range of pages, number of copies, and so on. 2. Select the printer in the Printer list. 3. Click Print to start printing.
Printer Driver Main Pane (Mac OS 9) The following settings are available on the Main pane. For details on settings items, refer to the printer driver help. Note • On the Main pane, choose Easy Settings to specify basic print settings based on the print target, or switch to Advanced Settings to complete more detailed settings as desired. Conguration using Easy Settings Setting Item Description A Copies Enter the number of copies to print, in a range of “1-999.” B Page Specify the pages to print.
Printer Driver Conguration using Advanced Settings Setting Item Description A Copies Enter the number of copies to print, in a range of “1-999.” B Page Specify the pages to print. • All Pages • From and To C Media Type Select the paper type. For information on the types of paper the printer supports, refer to the Paper Reference Guide. (→P.95) D Set Click to display the Media Detailed Settings dialog box for ink drying time and other detailed settings based on the paper type.
Printer Driver Setting Item Description P Reduce Print Unevenness This option is displayed if you have selected Plain Paper in C Media Type and Ofce Document in F Print Priority. Activate this option to automatically switch between one-pass and two-pass printings, which reduces color shading. Deactivate this option for one-pass printing only.
Printer Driver Page Setup Pane (Mac OS 9) The following settings are available on the Page Setup pane. For details on settings items, refer to the printer driver help. Setting Item Description A Roll Paper Width Displays the paper width of the roll loaded in the printer. B Page Size Displays the page size, as specied in the source application. For details on paper sizes available from the source application, see “Paper Sizes”. (→P.
Printer Driver Setting Item Description J Layout Direction This setting is available when I Page Layout is selected. Here, you can specify the orientation of multiple pages to be printed on a single sheet. K Page Border This setting is available when I Page Layout is selected. Here, you can specify the type of boundary line around each page of multiple pages printed on a single sheet. *1: Selecting poster layout from the I Page Layout list displays a check box for specifying the pages to print.
Printer Driver Finishing Pane (Mac OS 9) The following settings are available on the Finishing pane. For details on settings items, refer to the printer driver help. Setting Item Description A Media Source You can choose the media source. Options displayed in the list vary depending on the selection in C Media Type in the Main pane. B Roll Paper Width Displays the paper width of the roll loaded in the printer. Unknown is displayed if the printer cannot detect the roll paper width.
Printer Driver Device Settings Pane (Mac OS 9) The following settings are available on the Device Settings pane. Setting Item A Utility 490 Mac OS 9 Software Description Click to display the Printer Information dialog box, which offers the following maintenance for the printer.
Printer Driver Additional Settings Pane (Mac OS 9) The following settings are available on the Additional Settingspane. For details on settings items, refer to the printer driver help. Setting Item Description A Background Printing Choose the printing method. Activate this setting by clicking B On to print in the background. Deactivate this setting by clicking C Off to print in the foreground. D Data Send Method Choose how printing data is sent to the printer.
Printer Driver Color Settings Pane: Color (Mac OS 9) In general, make any needed adjustments to the color of documents in the application used to create them. However, if the color tone as printed is not as you expected, you can also adjust the color in the printer driver. Color Adjustment pane: color If the color tone as printed is not as you expected, you can adjust it on the Color Adjustment pane.
Printer Driver Setting Item Description I Gray Tone Adjustment Adjust the color tone of grays as desired. Choose Cool Black (tinged with blue), Warm Black (tinged with red), and so on. J Object Adjustment Select this option to display the Object Adjustment dialog box, in which you can specify objects subject to color adjustment. Note • For details on settings items, see “Adjusting the Color in the Printer Driver”. (→P.
Printer Driver Matching pane On the Matching pane, you can specify color matching, to compensate for differences in the appearance of colors on various devices. Note • To display the Matching pane, on the Main pane, click Color Settings by Color Mode in Advanced Settings, and then click Matching. (→P.484) Setting Item Description A Matching Mode Select the color matching mode to use, as desired. B Matching Method Select the matching method that suits the document to be printed.
Printer Driver Color Settings Pane: Monochrome (Mac OS 9) The following settings are available on the Color Settings pane for monochrome printing. Color Adjustment pane: monochrome On the Color Adjustment pane for monochrome printing, you can adjust the brightness and contrast. Note • To display the Color Adjustment pane, on the Main pane, click Color Settings by Color Mode in Advanced Settings. (→P.
Printer Driver Note • For details on settings items, see “Adjusting the Color in the Printer Driver”. (→P.178) Object Adjustment dialog box In the Object Adjustment dialog box, you can specify what type of print jobs to apply color adjustment to. If an original comprises images, graphics, and text, you can specify which portion to apply color adjustment to. Note • To display the Object Adjustment dialog box, on the Color Adjustment pane, click Object Adjustment.
Printer Driver Media Detailed Settings Dialog Box (Mac OS 9) The Paper Detailed Settings dialog box offers the following settings. For details on settings items, refer to the printer driver help. Note • To display the Paper Detailed Settings dialog box, on the Main pane, click Settings by Media Type. (→P.484) Setting Item Description A Media Type Select the paper type. For information on the types of paper the printer supports, refer to the Paper Reference Guide. (→P.
Printer Driver View Settings Dialog Box for the Printing Application (Mac OS 9) In the View Settings dialog box, you can check details of the selected printing application. Note • To display the View Settings dialog box, on the Main pane, click View Settings by Print Target. (→P.484) Setting Item Description A Print Target Shows all Print Target options (settings items for the printing application). B Name Identies the item selected in Print Target by its name and an icon.
Printer Driver Special Settings Dialog Box (Mac OS 9) If the printing results are not as you expected, you can change how printing is processed in the Special Settings dialog box. Note • To display the Special Settings dialog box, on the Additional Settings pane, click Special Settings. (→P.491) Setting Item A Fast Graphic Process Description If image colors are inconsistent in printed documents or if lines are printed in varying thicknesses, clearing this option may help produce the expected results.
Printmonitor Printmonitor imagePROGRAF Printmonitor (Macintosh) imagePROGRAF Printmonitor is a utility for checking the printer status and managing print jobs. • • • • Printer status can be checked in real time on a computer monitor. You can check the status of print jobs, cancel jobs, and manage them as needed. If a printer error occurs, you can investigate the corrective action immediately.
Network Setting Network Setting Network Setting Network Environment System requirements The system requirements, which vary depending on your network, are as follows. • Printing over a TCP/IP network • Compatible operating systems • Windows 2000 (Professional or Server) • Windows XP (Home Edition or Professional) • Windows Server 2003 (Standard Edition) • Windows Vista (Home Basic/Business/Ultimate) • Mac OS 9.1 or later • Mac OS X 10.2.
Network Setting Network environment After conrming what type of network environment you will connect the printer to, set up the printer and computers as needed. • Example of a Windows network In Windows networks, print over TCP/IP. Note • NetBIOS is not supported. • Example of a Macintosh network In Macintosh networks, print over AppleTalk (EtherTalk) or TCP/IP, using Bonjour(Zeroconf) functions.
Network Setting Conguring the IP Address on the Printer You must congure the printer’s IP address before using the printer in a TCP/IP network. The printer’s IP address is congured automatically when you install the printer driver following the instructions in the Quick Start Guide. Congure the IP address by using imagePROGRAF Device Setup Utility, the printer Control Panel, or ARP or PING commands, if the IP address is changed, or if you change the printer connection mode to a network connection.
Network Setting Conguring the IP Address Using imagePROGRAF Device Setup Utility From a computer running Windows, you can use imagePROGRAF Device Setup Utility provided with the printer to congure the printer’s IP address. This topic describes how to congure the IP address using imagePROGRAF Device Setup Utility. Important • To congure network settings, you must be logged in with administrative rights such as “Administrator” account.
Network Setting Conguring the IP Address Using the Printer Control Panel This topic describes how to congure the printer’s IP address on the Control Panel. 1. Press the Menu button to display MAIN MENU. 2. 3. 4. 5. 6. 7. Press ▲ or ▼ to select Interface Setup, and then press the ► button. Press ▲ or ▼ to select TCP/IP, and then press the ► button. Press ▲ or ▼ to select IP Setting, and then press the ► button. Press ▲ or ▼ to select IP Address, and then press the ► button.
Network Setting Conguring the IP Address Using ARP and PING Commands This topic describes how to congure the IP address using ARP and PING commands. To use the ARP and PING commands, you will need to know the printer’s MAC address. You can conrm the MAC address on the Control Panel. 1. Check the printer’s MAC address. You can conrm the MAC address on the Control Panel as follows: 1. Press the Menu button to display MAIN MENU. 2. Press ▲ or ▼ to select Interface Setup, and then press the ► button. 3.
Network Setting Using RemoteUI Enter the printer’s IP address in a web browser to display the RemoteUI page. After you log on to RemoteUI from the page, you can check and change the status of the printer and print jobs, and congure network settings. To access RemoteUI, start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI page. http://“printer IP address or name”/ Example: http://xxx.xxx.xxx.
Network Setting Conguring the Printer’s TCP/IP Network Settings Follow the steps below to congure the TCP/IP network settings. 1. Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI page. http://“printer IP address or name”/ Example: http://xxx.xxx.xxx.xxx/ 2. 3. 4. 5. Select Administrator Mode and click Logon. If a password has been set on the printer, enter the password.
Network Setting Item 7. Default Setting Details RAW Mode Bi-direction Activate this setting to use Raw mode bidirectional communication. Off FTP Printing Activate this setting to use FTP Printing. On SMTP Server Address Specify the SMTP server’s IP address. 0.0.0.0 Primary DNS Server Address Specify the IP address of the primary DNS server. 0.0.0.0 Secondary DNS Server Address Specify the IP address of the secondary DNS server. 0.0.0.
Network Setting Conguring the Printer’s AppleTalk Network Settings Follow the steps below to congure the AppleTalk network settings. 1. Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI page. http://“printer IP address or name”/ Example: http://xxx.xxx.xxx.xxx/ 2. 3. 4. 5. Select Administrator Mode and click Logon. If a password has been set on the printer, enter the password.
Network Setting Conguring the Printer’s NetWare Network Settings Follow the steps below to congure the NetWare network settings. 1. Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI page. http://“printer IP address or name”/ Example: http://xxx.xxx.xxx.xxx/ 2. 3. 4. 5. Select Administrator Mode and click Logon. If a password has been set on the printer, enter the password.
Network Setting Item NDS PServer NPrinter 7. Printer Number Specify the number of the printer connected to the NetWare print server. (0-15) 0 Tree Name Specify the name of an NDS tree that has a NetWare print server. (0-32 characters) - Context Name Specify the name of a context that has a NetWare print server. (0-255 characters) Print Server Name Specify the name of a NetWare print server. (0-64 characters) Print Server Password Set a password for the print server.
Network Setting Specifying Printer-Related Information Follow the steps below to specify device information and security settings. 1. Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI page. http://“printer IP address or name”/ Example: http://xxx.xxx.xxx.xxx/ 2. 3. 4. 5. Select Administrator Mode and click Logon. If a password has been set on the printer, enter the password.
Network Setting Conguring the Communication Mode Manually This topic gives instructions for conguring the communication mode manually. 1. Press the Menu button to display MAIN MENU. 2. 3. 4. 5. Press ▲ or ▼ to select Interface Setup, and then press ►. Press ▲ or ▼ to select Ethernet Driver, and then press ►. Press ▲ or ▼ to select Auto Detect, and then press ►. Press ▲ or ▼ to select Off, and then press OK. Return to the Ethernet Driver menu. 6. 7. Press ▲ or ▼ to select Comm.
Network Setting Email Notication When Printing is Finished or Errors Occur The printer can notify you of the printer status by email. Even when you are away from the printer, you can know when printing is nished or if errors occur. Receive notication via email on your mobile phone or at your computer. Use the imagePROGRAF Status Monitor (Windows) function to set up email recipients and message timing.
Network Setting Initializing the Network Settings Use RemoteUI to restore the network settings to the default values as follows. Important • Initializing the network settings will also restore the default value of the printer’s IP address. As a result, the RemoteUI page cannot be displayed in the web browser after this procedure. • For instructions on reconguring the IP address, see “Conguring the IP Address on the Printer”. (→P.503) • For details on RemoteUI, see “Using RemoteUI”. (→P.507) 1.
Network Setting (Windows) Network Setting (Windows) Conguring the Printer Driver Destination (Windows) This topic describes how to specify the printer driver destination if the printer’s IP address is changed, or if you will use the printer over a network connection instead of via USB connection. The procedure described below is the conguration based on the LPR or Raw protocol using the standard TCP/IP port in Windows ( Standard TCP/IP Port ).
Network Setting (Windows) Sharing the Printer in Windows If you set up a computer as a print server in Windows 2000, Windows XP, Windows Server 2003, Windows Vista, or Windows Server 2008, the computer can receive print jobs sent from other computers (clients) connected to it for printing. This topic describes how to share the printer in Windows. Important • We recommend that your network administrator congure your network for printer sharing. 1. Open the Printers and Faxes (or Printers ) window. 2.
Network Setting (Windows) 3. On the Sharing sheet, click Share this printer and enter the shared name. 4. To print jobs from clients running other versions of Windows, click Additional Drivers and follow the instructions to install the printer driver of the corresponding version. If you are prompted to choose the location of the printer driver le, insert the provided User Software CD-ROM in the CD-ROM drive and specify the folder where the printer driver is located. 5. Click OK.
Network Setting (Windows) Conguring the Printer’s NetWare Network Settings Follow the steps below to congure the NetWare network settings. 1. Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI page. http://“printer IP address or name”/ Example: http://xxx.xxx.xxx.xxx/ 2. 3. 4. 5. Select Administrator Mode and click Logon. If a password has been set on the printer, enter the password.
Network Setting (Windows) Item NDS PServer NPrinter 7. Default Setting Details Printer Number Specify the number of the printer connected to the NetWare print server. (0-15) 0 Tree Name Specify the name of an NDS tree that has a NetWare print server. (0-32 characters) - Context Name Specify the name of a context that has a NetWare print server. (0-255 characters) Print Server Name Specify the name of a NetWare print server.
Network Setting (Windows) Specifying the Printer’s Frame Type To enable communication between the printer and computers on your network, specify the Ethernet frame type in your NetWare environment. Follow the steps below to specify the frame type by using imagePROGRAF Device Setup Utility or the printer Control Panel. Note • You can specify the frame type by using RemoteUI if the printer’s IP address is congured.
Network Setting (Windows) Specifying the Frame Type Using the Printer Control Panel 1. Press the Menu button to display MAIN MENU. 2. 3. 4. 5. Press ▲ or ▼ to select Interface Setup, and then press the ► button. Press ▲ or ▼ to select NetWare, and then press the ► button. Press ▲ or ▼ to select NetWare, and then press the ► button. Press ▲ or ▼ to select On, and then press the OK button. Return to the NetWare menu. 6. 7. Press ▲ or ▼ to select Frame Type, and then press the ► button.
Network Setting (Windows) Specifying NetWare Print Services Before printing in a NetWare network, you must congure print services such as print servers, print queues, and so on. You can congure the print service settings from a computer using any of the following software. • NWADMIN • PCONSOLE (from Novell, provided with NetWare) Important • If you use NWADMIN to congure the print service settings, Novell Client (the Novell NetWare client software) must be installed as the client software application.
Network Setting (Windows) Using NWADMIN or PCONSOLE to set up the print server Use NWADMIN to set up the print server if NDS queue server mode or remote printer mode is used. 1. 2. Log into NetWare as Administrator or with equivalent rights, and then start NWADMIN. Run Quick Setup. 1. Choose Print Services Quick Setup in the Tools menu. 2. Enter a desired name in Print Server Name. To use an existing print server, click the button at right and choose the name from the list. 3.
Network Setting (Windows) Use PCONSOLE to set up the print server if bindery queue server mode or remote printer mode is used. 1. 2. 3. Log into NetWare as Supervisor and start PCONSOLE. Switch to bindery mode. If the print server has not been created, create it. 1. In Available Options, select Quick Setup and press the Enter key. 2. Enter the name of the new print server, the new printer, and the queue. Note • The print server name will be required when conguring the printer’s protocol settings.
Network Setting (Windows) Specifying NetWare Protocols Follow the steps below to congure NetWare protocol settings other than the frame type by using RemoteUI. Note • For details on RemoteUI, see “Using RemoteUI”. (→P.507) 1. Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI page. http://“printer IP address or name”/ Example: http://xxx.xxx.xxx.xxx/ 2. 3. 4. 5. Select Administrator Mode and click Logon.
Network Setting (Windows) • If you have selected NDS PServer: Queue Server Mode (Using an NDS Print Server) 1. In Tree Name and Context Name, enter the tree and context name of the print server. 2. In Print Server Name, enter the name of the print server created in "Specifying NetWare Print Services. (→P.524)" 3. In Print Server Password, enter the password of the print server created in "Specifying NetWare Print Services. (→P.524)" 4.
Network Setting (Windows) Conguring NetWare Network Settings To print over a NetWare network, congure the network environment as follows. Important • To congure network settings, you must be logged in with administrative rights such as “Administrator” account. We recommend that your network administrator congure the network settings. 1. Specify the Ethernet frame type for communication between the printer and computers. For instructions, see “Specifying the Printer’s Frame Type”. (→P.522) 2.
Network Setting (Windows) Installing imagePROGRAF Device Setup Utility Install imagePROGRAF Device Setup Utility from the User Software CD-ROM provided with the printer as follows: Important • In Windows 2000/Windows XP/Windows Server 2003/Windows Vista, you must log on with administrative rights equivalent to the “Administrator” account. 1. 2. 3. 4. Insert the User Software CD-ROM in the CD-ROM drive. On the Setup Menu window, click Install Individual Software.
Network Setting (Macintosh) Network Setting (Macintosh) Conguring the Printer Driver Destination (Macintosh) Specify the printer driver destination as follows if the printer’s IP address is changed, or if you will use the printer over a network connection instead of via USB connection. • If you switch to printing in an AppleTalk network, see “Conguring the Destination for AppleTalk Network (Macintosh)”. (→P.
Network Setting (Macintosh) Conguring the Printer’s AppleTalk Network Settings Follow the steps below to congure the AppleTalk network settings. 1. Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI page. http://“printer IP address or name”/ Example: http://xxx.xxx.xxx.xxx/ 2. 3. 4. 5. Select Administrator Mode and click Logon. If a password has been set on the printer, enter the password.
Network Setting (Macintosh) Conguring the Destination for AppleTalk Network (Macintosh) To print over an AppleTalk network, activate the AppleTalk protocol and congure the destination as follows. Activating AppleTalk on the printer Important • By factory default, the AppleTalk protocol is disabled on the printer. 1. Press the Menu button to display MAIN MENU. 2. 3. 4. 5. Press ▲ or ▼ to select Interface Setup, and then press the ► button.
Network Setting (Macintosh) Conguring the Destination (Mac OS X) Note • The following procedures are based on Mac OS X 10.4. The method of conguring the destination varies depending on the version of Mac OS X. 1. 2. In System Preferences, click Network to display the Network window. In Show, choose Built-in Ethernet. Next, click AppleTalk, select Make AppleTalk Active, and click Apply now. 3. 4. 5. 6. Close the Network window and save the settings.
Network Setting (Macintosh) 7. Select the printer from the list in the Printer Browser window and click Add.
Network Setting (Macintosh) Conguring the Destination (Mac OS 9) 1. 2. Choose Chooser from the Apple menu to display the Chooser window. 3. 4. 5. Close the Chooser window. 6. 7. 8. 9. Close the AppleTalk window and save the settings. 10. In AppleTalk, click Active. Click AppleTalk under Control Panels to display the AppleTalk window. In Connect via, choose Built-in Ethernet. Choose Chooser from the Apple menu to display the Chooser window. In the list at left, click GARO Printer Driver.
Network Setting (Macintosh) Conguring the Destination for TCP/IP Network (Macintosh) Follow the steps below to congure the destination if you use the printer on TCP/IP network. Important • If you use the printer on TCP/IP network, make sure the printer’s IP address is congured correctly. • Conguring the IP Address Using the Printer Control Panel (→P.505) Conguring the Destination (Mac OS X) Note • The following procedures are based on Mac OS X 10.4.
Network Setting (Macintosh) 5. In the list of connection methods, click Canon IP(iPF). 6. Enter the printer’s IP address in Printer’s Address and click Add. 7. Make sure the printer has been added, and then close the Printer List window.
Network Setting (Macintosh) Conguring the Destination (Mac OS 9) 1. 2. Choose Chooser from the Apple menu to display the Chooser window. 3. Click Registering IP Address in the Destination list to display the IP Address Register/Edit In the list at left, click GARO Printer Driver. dialog box. 4. Enter the printer’s IP address in IP Address and click Add. 5. Click OK to close the IP Address Register/Edit dialog box.
Network Setting (Macintosh) 6. In the Destination list, click the address you registered. 7. Close the Chooser window and click OK after the conrmation message is displayed.
Network Setting (Macintosh) Conguring the Destination for Bonjour Network (Macintosh) In Mac OS X 10.2.8 and later, use Bonjour functions to easily connect the printer to the network. Follow the steps below to congure the destination if you use the printer on TCP/IP network. Note • In Mac OS 9, if the computer’s TCP/IP settings have been congured, you can connect the printer to the network as easily as with the Bonjour function.
Adjusting the Printhead Adjustments for Better Print Quality Adjusting the Printhead Correcting Print Misalignment If printed vertical lines are warped or colors are out of alignment, adjust the Printhead alignment. Adjust the Printhead alignment automatically or manually by using a printed test pattern. For instructions on automatic adjustment, see “Adjusting the Printhead Alignment Automatically”. (→P.542) For instructions on manual adjustment, see “Adjusting the Printhead Alignment Manually”. (→P.
Adjusting the Printhead 2. Press the Menu button to display MAIN MENU. 3. 4. 5. 6. Press ▲ or ▼ to select Adjust Printer, and then press the ► button. Press ▲ or ▼ to select Auto Head Adj., and then press the ► button. Press ▲ or ▼ to select Advanced Adj., and then press the ► button. Press ▲ or ▼ to select Yes, and then press the OK button. A test pattern is printed for printhead adjustment. After reading the pattern, the printer automatically adjusts the Printhead alignment.
Adjusting the Printhead Adjusting the Printhead Alignment Manually If printed vertical lines are warped or colors are out of alignment, adjust the Printhead alignment. Adjust the Printhead alignment automatically or manually by using a printed test pattern. You can adjust the Printhead alignment automatically or manually. Normally, choose automatic adjustment. If using special media or printing does not improve even after performing automatic adjustment using advanced adjustment, try manual adjustment.
Adjusting the Printhead 8. Examine test pattern D-1 for printhead adjustment. After you determine the pattern with straight lines, press ▲ or ▼ to choose the pattern number, and then press the OK button. Note • If lines seem straightest in two patterns but you cannot decide which one is better, choose an intermediate value. For example, choose 11 if you cannot decide whether pattern 10 or 12 is better. 9. 10. 11. 12. Repeat steps 7 and 8 to specify the adjustment value for D-2 to D-5 and D-7 to D-11.
Adjusting the Printhead Adjusting the Printhead Orientation If printed lines are misaligned, try adjusting the angle of the Printhead. Even slight misalignment can be corrected. Adjust the Printhead orientation by printing and reading a test pattern. 1. When using sheets, have an unused sheet A4/Letter-sized or larger ready. When using a roll, load a roll 10 inches (254 mm) or wider. • Loading the Sheet in the Printer (→P.135) • Loading Rolls on the Roll Holder (→P.
Adjusting the Printhead Important • Do not touch the Linear Scale (a) or Carriage Shaft (b). 6. Examine the test pattern for adjustment. Determine the straightest set of lines. Note • If no single set of lines is perfectly straight, choose the two sets of lines that are least misaligned. 7. Open the Top Cover and move the Angle Adjustment Lever to match the number (or the square) of the straightest set of lines.
Adjusting the Printhead Adjusting the Printhead Height If printed documents rub against the printer during printing or if the edge of paper is wrinkled from rubbing, it may help to raise the Printhead. If image edges are blurred, it may help to lower the Printhead. 1. Press the Menu button to display MAIN MENU. 2. 3. 4. 5. Press ▲ or ▼ to select Paper Details, and then press the ► button. Press ▲ or ▼ to select the type of paper, and then press the ► button.
Adjusting the feed amount Adjusting the feed amount Adjusting the Feed Amount Automatically If printed images are affected by banding in different colors, adjust the amount that paper is fed. There are two modes for adjusting the amount paper is fed, Standard Adj. and Advanced Adj.. Advanced Adj. offers a wider range of adjustment than Standard Adj.. If using Standard Adj. does not eliminate streaks, or if streaks are quite noticeable, try Advanced Adj..
Adjusting the feed amount Follow the steps below to adjust the feed amount automatically. 1. Prepare one unused sheet A4/Letter-sized or larger when Standard Adj. is selected or two when Advanced Adj. is selected (or one when using a sheet A2-sized or larger). When using a roll, load a roll 10 inches (254 mm) or wider. • Loading Rolls on the Roll Holder (→P.107) • Loading Rolls in the Roll Holder Slot (→P.109) • Loading the Roll in the Printer (→P.110) • Loading the Sheet in the Printer (→P.
Adjusting the feed amount Adjusting the feed amount during printing If, during printing, the contrast is uneven sideways across the paper or banding in different colors appears every 40 mm (1.6 in) or so, try adjusting the feed amount as follows. However, note that because printing is paused, colors may be slightly different. 1. Press the Online button to pause printing. 2. Press the Menu button to display Menu Durng Prtng. 3. 4. Press ▲ or ▼ to select Fine Band Adj., and then press the OK button.
Adjusting the feed amount Adjusting the Feed Amount Manually If printed images are affected by banding in different colors, adjust the amount that paper is fed. This topic describes how to adjust the feed amount manually. When using highly transparent media for which automatic adjustment is not supported, adjust the feed amount manually. We recommend automatic adjustment for other types of media. For instructions on automatic adjustment, see “Adjusting the Feed Amount Automatically”. (→P.
Adjusting the feed amount 2. Press the Menu button to display MAIN MENU. 3. 4. 5. Press ▲ or ▼ to select Adjust Printer, and then press the ► button. Press ▲ or ▼ to select Manual Band Adj, and then press the ► button. Press ▲ or ▼ to select Yes, and then press the OK button. Test pattern A is printed for band adjustment. 6. Examine test pattern A for band adjustment.
Adjusting the feed amount Adjusting the feed amount during printing If, during printing, the contrast is uneven sideways across the paper or banding in different colors appears every 40 mm (1.6 in) or so, try adjusting the feed amount as follows. The results of adjustment are applied to printing in progress, enabling you to check the results immediately. However, note that because printing is paused, colors may be slightly different. 1. Press the Online button to pause printing. 2.
Adjusting the feed amount Adjusting the Measurement Scale for Better Accuracy To adjust the measurement scale and ensure accuracy (so that lines in CAD drawings are printed at exactly the right length, for example), specify the amount of paper stretching or shrinkage when adjusting the feed amount. Note • If printed images are affected by banding in different colors, adjust the amount that paper is fed. (→P.552) Important • Use paper of the same type and size for adjustment as you will use for printing.
Adjusting the feed amount 2. Press the Menu button to display MAIN MENU. 3. 4. 5. Press ▲ or ▼ to select Adjust Printer, and then press the ► button. Press ▲ or ▼ to select Adjust Length, and then press the ► button. Press ▲ or ▼ to select Yes, and then press the OK button. A test pattern is printed for adjustment based on the amount of paper stretching or shrinkage. The scale bar shows “Millimeter” in 50 mm units and “Inch” in 1 inch units. 6. Measure the length of the adjustment pattern.
Adjusting the feed amount Adjusting the Vacuum Strength When printing on heavyweight paper or paper that curls or wrinkles easily, if paper rubs against the printer or the edge is wrinkled from rubbing, adjusting the level of suction against paper on the Platen may improve results. 1. Press the Menu button to display MAIN MENU. 2. 3. 4. 5. Press ▲ or ▼ to select Paper Details, and then press the ► button. Press ▲ or ▼ to select the type of paper, and then press the ► button.
Ink Tanks Maintenance Ink Tanks Ink Tanks An Ink Tank that can be used in the printer is labeled with a white letter “A” in a black circle on the side. When purchasing an Ink Tank, make sure an “A” is printed on the label, along with the following Ink Tank part numbers. • • • • • BK Ink Tank PFI-102BK MBK Ink Tank PFI-102MBK C Ink Tank PFI-102C M Ink Tank PFI-102M Y Ink Tank PFI-102Y 130 ml (4.4 oz) per color Note • For instructions on replacing Ink Tank, see “Replacing Ink Tanks”. (→P.
Ink Tanks Replacing Ink Tanks Compatible Ink Tank An Ink Tank that can be used in the printer is labeled with a white letter “A” in a black circle on the side. Request an Ink Tank with the same label when you purchase a new Ink Tank. For more information, see “Ink Tanks”. (→P.558) Precautions when handling an Ink Tank Take the following precautions when handling an Ink Tank. Caution • For safety, keep an Ink Tank out of the reach of children.
Ink Tanks Replacing an Ink Tank 1. Make sure no print jobs are in progress. You can replace Ink Tank if the Display Screen indicates the printer is Online or Ofine, or if messages advise you to check the amount of ink left or replace the Ink Tank. If a message prompts you to replace the Ink Tank, press the OK button. Steps 2-4 are unnecessary in this case. Go to step 5 and remove the Ink Tank.
Ink Tanks 6. Press the tip of the Ink Tank Lock Lever of the color for replacement and lift the Ink Tank Lock Lever to open it. 7. Hold the empty Ink Tank by the grip to remove it, and press the OK button. Note • If there is still some ink left in the Ink Tank you removed, store the ink tank with the ink holes (a) facing up. Otherwise, ink may leak and cause stains. Put the Ink Tank in a plastic bag and seal it. • Dispose of used Ink Tank according to local regulations.
Ink Tanks 8. Before opening the pouch, shake the Ink Tank gently seven or eight times. Agitate the ink in the Ink Tank by slowly turning the Ink Tank upside-down and right side up several times. Note • If you do not shake the Ink Tank, the ink may sediment, which may affect printing quality. 9. Open the pouch and remove the Ink Tank. Note • Never touch the ink holes or metal contacts. This may cause stains, damage the Ink Tank, and affect printing quality.
Ink Tanks 11. Close the Ink Tank Lock Lever until it clicks. 12. Make sure the Ink Lamp is lit in red. Note • Ink Lamp ashes when there is little ink left. 13. Close the Ink Tank Cover. The printer returns to the mode before replacement of Ink Tank.
Ink Tanks Checking Ink Tank Levels On the Display Screen, you can check how much ink is left in the Ink Tank. The Display Screen indicates the remaining ink levels, unless an error message is displayed. During error messages, press the Information button to view the ink levels on the Display Screen. These levels shown on the Display Screen correspond to the inks identied by the Color Label on the bottom of the Display Screen.
Ink Tanks When to Replace Ink Tanks Replace or prepare to replace Ink Tank in the following situations. If a message for checking the ink is shown on the Display Screen When there is little ink left, the Message lamp is lit and Ink Level: Check is shown on the Display Screen. You can continue to print, but prepare to replace the Ink Tank. (→P.
Printheads Printheads Printhead • Printhead PF-03 Note • For instructions on replacing the Printhead, see “Replacing the Printhead”. (→P.569) Checking the Print Quality If printing is faint or streaked in different colors, make sure the Printhead nozzles are clear by printing a test pattern to check the nozzles. For instructions, see “Checking for Nozzle Clogging”. (→P.
Printheads Checking for Nozzle Clogging If printing is faint or streaked in different colors, make sure the Printhead nozzles are clear by printing a test pattern to check the nozzles. Note • You can specify a number of pages in the printer’s Noz. Check Freq. menu for automatic nozzle checking every time you nish printing that quantity. (→P.48) 1. Load unused paper. • Loading Rolls on the Roll Holder (→P.107) • Loading Rolls in the Roll Holder Slot (→P.109) • Loading the Roll in the Printer (→P.
Printheads Cleaning the Printhead Cleaning the Printhead may help clear nozzles that are clogged. Note • You can specify a number of pages in the printer’s Noz. Check Freq. menu for automatic nozzle checking and cleaning every time you nish printing that quantity. (→P.48) • You can start Head Cleaning A by holding down the Information button for three seconds or more. Cleaning the Printhead 1. Press the Menu button to display MAIN MENU. 2. 3.
Printheads Replacing the Printhead When to replace the Printhead Replace the Printhead in the following situations. • If the printing quality does not improve even after two cycles of Head Cleaning B from the printer menu • If the Display Screen indicates Open top cover and replace the printhead. • If your Canon dealer has advised you to replace the Printhead Compatible Printhead For information on the compatible Printhead, see “Printhead”. (→P.
Printheads Replacing the Printhead Follow the steps below to replace the Printhead. Failure to follow this procedure may cause ink leak from the Printhead, which may cause stains. Note • Prepare a new Ink Tank when ink levels are low. • Your hands may become dirty during Printhead replacement. Use the gloves provided with the new Printhead for replacement. • Choose On in Auto Print to have the printer automatically adjust the Printhead alignment after replacement of the Printhead. (→P.48) 1.
Printheads 8. If the Printhead Fixer Cover or Printhead Fixer Lever is dirty, use a damp cloth that you have wrung out completely to wipe it clean. Important • Never touch the Linear Scale (a) or Carriage Shaft (b). • Never touch the metal contacts of the Carriage. This may damage the printer. 9. Lift the Carriage Cover to open it fully.
Printheads 10. Pull the Printhead Fixer Lever forward all the way to open it completely. 11. Pull up the Printhead Fixer Cover to open it completely. 12. Remove the used Printhead. Caution • When replacing the Printhead immediately after printing, wait a few minutes before replacing it. The metal parts of the Printhead become hot during printing, and there is a risk of burns from touching these parts. Note • Dispose of the used Printhead in accordance with local regulations.
Printheads 13. Holding the new Printhead by the grips (a), remove it from the case. Important • When handling the Printhead, always hold it by the grips (a). Never touch the nozzles (b) or the metal contacts (c). This may damage the Printhead and affect printing quality. 14. While rmly holding the Printhead you have removed, use your other hand to remove the orange Safety Cap 1 (a). Squeeze the grips (c) of Safety Cap 2 (b) and pull it down to remove it.
Printheads 15. With the nozzles facing down and the metal contacts toward the back, insert the Printhead into the Carriage. Making sure that the metal contacts do not touch the Carriage, carefully push the printhead rmly into the carriage. 16. Pull the Printhead Fixer Cover down toward the front to lock the Printhead in place. 17. Push the Printhead Fixer Lever toward the back of the printer until it clicks. 18. Push the Carriage Cover forward until it clicks.
Printheads 19. Close the Top Cover. Ink now lls the system. After about 13 minutes, the Printhead alignment will be automatically adjusted, and the printer will go online. If no paper has been loaded, a message is displayed requesting you to load paper. Important • Never remove an Ink Tank while the system is lling with ink. • If Auto Print is Off in the printer menu, the Printhead alignment will not be adjusted. In this case, adjust the alignment after Printhead replacement by accessing Auto Head Adj.
Cutter Unit Cutter Unit Cutter Unit A reaplacement Cutter Unit. • Cutter Unit CT-05 Note • For instructions on replacing the Cutter Unit, see “Replacing the Cutter Unit”. (→P.
Cutter Unit Replacing the Cutter Unit Note • For information on compatible Cutter Unit, see “Cutter Unit”. (→P.576) • During Cutter Unit replacement, do not open the Carriage Cover. Ink will automatically ll the Printhead after the Carriage Cover is opened, which consumes ink. 1. 2. Turn the printer on. (→P.22) 3. Select Maintenance → Change Cutter → Yes, and then press the OK button. Press the Menu button to display MAIN MENU.
Cutter Unit 6. Hold the Cutter Unit by the grip (a). Pushing down at the position indicated (b), remove it from the Carriage. Important • Never touch any part of the Cutter Unit except the grips (a) and (b). This poses a risk of injury and may stain your hands. Also, it may damage the printer. Caution • Dispose of the used Cutter Unit according to local regulations. • Do not disassemble the Cutter Unit. Touching the blade may cause injury. 7. Hold the new Cutter Unit by the grip (a).
Maintenance Cartridge Maintenance Cartridge Maintenance Cartridge A replacement Maintenance Cartridge. Maintenance Cartridge includes a Shaft Cleaner. • Maintenance Cartridge MC-07 Note • For instructions on replacing the Maintenance Cartridge, see “Replacing the Maintenance Cartridge”. (→P.579) Replacing the Maintenance Cartridge Compatible Maintenance Cartridge For information on the compatible Maintenance Cartridge, see “Maintenance Cartridge”. (→P.
Maintenance Cartridge Replacing the Maintenance Cartridge 1. Make sure no print jobs are in progress. You can replace the Maintenance Cartridge if the Display Screen indicates the printer is Ofine or if messages advise you to replace the Maintenance Cartridge. If a message prompts you to replace the Maintenance Cartridge, go to step 6 and remove the Maintenance Cartridge.
Maintenance Cartridge 7. Hold the handle (a) of the used Maintenance Cartridge and pull out the cartridge. Grasp the handles on both sides (b) and keep the cartridge level as you remove it. Important • Used Maintenance Cartridge is heavy. Always grasp the cartridge handles on both sides rmly and keep the cartridge level during removal and storage. If you drop a used Maintenance Cartridge or store it at an angle, ink may leak and cause stains. 8.
Maintenance Cartridge 10. Conrm the Maintenance Cartridge is right-side up, put it in the box, and store it so that it stays level. Important • Always put the used Maintenance Cartridge back in the box and store the box on a at surface. Otherwise, ink may leak and cause stains. • In accordance with its active and ongoing policy to protect the environment, Canon collects used Maintenance Cartridge.
Maintenance Cartridge 15. Replace the Shaft Cleaner. Replacing the (→P.584) The printer returns to the mode before replacement of the Maintenance Cartridge. If a message is displayed advising you to replace the Maintenance Cartridge, printing is not possible. Make sure that the Maintenance Cartridge is installed correctly. If a print job was in progress when the Maintenance Cartridge was replaced, printing is resumed.
Maintenance Cartridge Replacing the Shaft Cleaner Replace the Shaft Cleaner when you replace the Maintenance Cartridge. New Shaft Cleaner is included with replacement Maintenance Cartridge. After Maintenance Cartridge replacement, a message on the Display Screen prompts you to replace the Shaft Cleaner. Select Yes and press the OK button. Next, go to step 3. 1. Press the Menu button to display MAIN MENU. 2. 3. 4. Press ▲ or ▼ to select Maintenance, and then press the ► button.
Maintenance Cartridge 7. After removing the cap of the new Shaft Cleaner, hold it by the grips (a) and attach it to the Carriage. Push the Shaft Cleaner until it clicks into place. Note • Attach the cap from the new Shaft Cleaner on the used one. Be sure to put the used Shaft Cleaner in the small box before putting it in the larger box with the used Maintenance Cartridge for disposal. 8. Close the Top Cover. The Carriage is moved, and the printer goes online.
Maintenance Cartridge Checking the Remaining Maintenance Cartridge Capacity The Maintenance Cartridge absorbs excess ink from borderless printing, printhead cleaning, and other processes. You can conrm the remaining capacity of the Maintenance Cartridge by checking the Maintenance Cartridge capacity shown on the Display Screen. Press the Information button to display the remaining capacity of the Maintenance Cartridge on the Display Screen.
Maintenance Cartridge When to Replace the Maintenance Cartridge Replace or prepare to replace the Maintenance Cartridge in the following situations. If a message for checking the Maintenance Cartridge is shown on the Display Screen When the Maintenance Cartridge capacity is low, the Message lamp is lit and Prepare for maint cart replacement. is displayed. You can continue to print, but check the remaining Maintenance Cartridge capacity and prepare to replace the Maintenance Cartridge with a new one. (→P.
Cleaning the Printer Cleaning the Printer Cleaning the Printer Exterior Clean the printer regularly to maintain better printing quality and help prevent problems. About once a month, clean the printer exterior. 1. 2. Turn the printer off. (→P.22) Unplug the power cord from the outlet. Caution • Always turn off the printer and unplug the power cord before cleaning or maintenance. Accidentally leaving the printer on poses a risk of injury if you touch moving parts inside the printer. 3.
Cleaning the Printer Cleaning Inside the Top Cover Clean inside the Top Cover about once a month to maintain better printing quality and help prevent problems. Also clean inside the Top Cover in the following situations to ensure optimal operation.
Cleaning the Printer 3. Using a damp cloth that you have wrung out completely, wipe inside the Top Cover to clean it. Wipe away any ink residue on the Top Cover Roller (a), all over the Platen (b), the Paper Retainer (c), the Borderless Printing Ink Grooves (d), the Ejection Guide (e), and the guide rail (f). Important • Do not use a dry cloth to wipe inside the Top Cover. This may create a static charge, which may attract dust and affect the printing quality.
Cleaning the Printer Cleaning the Paper Retainer Clean the Paper Retainer about once a month to maintain better printing quality and help prevent problems. Also clean the Paper Retainer in the following situations to ensure the printer offers a comfortable working environment. • If the printed surface or the underside of paper is dirty after printing • After printing on small paper Caution • During cleaning, use a type of paper that does not generate much dust from cutting, such as Plain Paper.
Cleaning the Printer 5. Pull the Release Lever forward. 6. Plug the power cord into the outlet.
Cleaning the Printer Cleaning the Printhead Cleaning the Printhead may help clear nozzles that are clogged. Note • You can specify a number of pages in the printer’s Noz. Check Freq. menu for automatic nozzle checking and cleaning every time you nish printing that quantity. (→P.48) • You can start Head Cleaning A by holding down the Information button for three seconds or more. Cleaning the Printhead 1. Press the Menu button to display MAIN MENU. 2. 3.
Other Maintenance Other Maintenance Preparing to Transfer the Printer To protect the internal parts in transit, always follow the steps below before transferring the printer to a new location. Refer to the Quick Start Guide for details on packing the printer and installing it after transfer. Note • It is not possible to prepare the printer for transfer if the Display Screen prompts you to replace the Maintenance Cartridge or check the remaining capacity.
Other Maintenance 7. Open the Ink Tank Lock Lever and remove every Ink Tank. Put the Ink Tank in a plastic bag and seal it. Note • Store the Ink Tank you removed with the ink holes (a) facing up. Otherwise, ink may leak and cause stains. 8. Close every Ink Tank Lock Lever, and close the Ink Tank Cover. At this point, ink is drawn out from inside the tubes. Important • Do not remove the Maintenance Cartridge during this process. When the suction is nished, Turn Power Off!! is displayed. 9.
Other Maintenance 11. Open the Top Cover. 12. Grasp the Belt, insert it between the Belt Stopper, and afx the Belt Stopper to the Carriage Shaft. Important • Never touch the Linear Scale (a) or Carriage Shaft (b). Note • Here, the Belt Stopper is the one that was removed and stored after initial installation. 13. Close the Top Cover.
Other Maintenance 14. 15. Tape down printer covers to secure them, in the reverse order of tape removal during installation. Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package them in a shipping box.
Other Maintenance Updating the Firmware Update the printer rmware to take advantage of new and improved printer functions. Conrming the rmware version 1. Press the Menu button to display MAIN MENU. 2. 3. Press ▲ or ▼ to select Information, and then press ►. Press ▲ or ▼ to select System Info, and then press the ► button. The rmware version is displayed. Updating the Firmware To obtain the latest rmware, visit the Canon website.
Frequently Asked Questions Troubleshooting Frequently Asked Questions Frequently Asked Questions This section presents frequently asked questions and answers. To view more detailed explanations, click the hyperlinks in the answer column. Question Answer How do I print on a roll? When printing on rolls, after loading the roll, specify the paper type and length, both on the Control Panel and in the printer driver. ÞLoading and Printing on Rolls (→P.
Frequently Asked Questions Question Answer How do I print without wasting paper? To conserve paper, you can specify in the printer driver to rotate originals 90 degrees or to print without top and bottom margins. ÞConserving Roll Paper by Rotating Originals 90 Degrees (→P.359) ÞConserving Roll Paper by Printing Originals Without Top and Bottom Margins (→P.
Problems Regarding Paper Problems Regarding Paper Clearing Jammed Roll Paper If roll paper jams, follow the steps below to remove jams. 1. 2. Turn the printer off. (→P.22) 3. If the Carriage is out, move the Carriage to separate it from the paper. Open the Top Cover. Important • If you push the Carriage to the left edge, the blade of the Cutter Unit will be lowered in preparation to cut the paper.
Problems Regarding Paper 4. Push the Release Lever back. 5. Holding the paper on both sides, pull the jammed portion out toward the front. Use a scissors to cut away the printed or wrinkled portion. Caution • When cutting paper, be careful to avoid injury and damaging the printer. 6. If the Carriage is on the left, move the Carriage to the right until it stops. Important • Always move the Carriage to the right side.
Problems Regarding Paper 7. Pull the roll edge gently and align it with the Paper Alignment Line (a). Lower the Release Lever toward the front. Important • Do not force the roll paper into alignment with the Paper Alignment Line (a). This may prevent the paper from being advanced straight. • The amount of paper pulled from the roll corresponds to the margin of the leading edge. 8. Close the Top Cover. 9. Turn the printer on. (→P.22) The roll is now advanced.
Problems Regarding Paper Clearing a Jammed Sheet If a sheet jams, follow the steps below to remove it. 1. 2. Turn the printer off. (→P.22) 3. If the Carriage is out, move the Carriage to separate it from the paper. Open the Top Cover. Important • Do not touch the Linear Scale (a) or Carriage Shaft (b). 4. Push the Release Lever back.
Problems Regarding Paper 5. If the paper is visible, grasp the paper and pull it forward. 6. If you cannot see the paper, remove the scrap from behind the printer. After removing the paper, make sure there are no other scraps of paper in the printer. 7. If the Carriage is on the left, move the Carriage to the right until it stops. Important • Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may occur when you turn on the printer. 8. Turn the printer on.
Problems Regarding Paper Roll paper cannot be inserted into the Paper Feed Slot Cause The roll paper is warped. Corrective Action Straighten out curls and reload the roll. Cannot Load Sheets Cause The paper source selection is incorrect. Corrective Action Press the Feeder Selection button to activate the Cut Sheet lamp. Paper is not cut neatly Cause Corrective Action The paper is bent or curled at the cut position. Straighten out any curling by the edges of the paper.
Printing does not start Printing does not start The Data lamp on the Control Panel does not light up Cause Corrective Action The printer is not on. Make sure the power cord is securely plugged in, all the way. Press the Power button to turn the printer on. The printer is not selected in the printer driver. (The printer is in Sleep mode.) In Windows, select the printer by clicking Select Printer or Printer in the printing dialog box and try printing again.
The printer stops during a print job The printer stops during a print job An error message is shown on the Display Screen Status Corrective Action An error message is displayed during printing. Check the error message and take action as necessary. (→P.629) The last portion of roll paper was used during a print job, and paper could not be advanced because the trailing edge is taped to the roll. Remove the used roll and insert a new roll. (→P.113) (→P.114) (→P.115) (→P.
Problems with the printing quality Problems with the printing quality Printing is faint Cause Corrective Action You may be printing on the wrong side of the paper. Print on the printing surface. The Printhead nozzles are clogged. Print a test pattern to check the nozzles and see if they are clogged. (→P.567) Because the printer was left without Ink Tanks installed for some time, ink has become clogged in the ink supply system. After the Ink Tank has been installed for 24 hours, run Head Cleaning B.
Problems with the printing quality Paper rubs against the Printhead Cause Corrective Action The paper type as specied in the printer driver does Load paper of the same type as you have specied not match the type loaded in the printer. (*1) in the printer driver. (→P.110) (→P.135) Make sure the same type of paper is specied in the printer driver as you have loaded in the printer. 1. Hold down the Stop button for a second or more to cancel printing. 2.
Problems with the printing quality The edges of the paper are dirty Cause Corrective Action The Platen has become dirty after borderless printing Open the Top Cover and clean the Platen. or printing on small paper. (→P.589) The paper type as specied on the printer does not match the type specied in the printer driver. Make sure the same paper type is specied on the printer as in the printer driver. (→P.105) (→P.134) Make sure the same paper type is specied in the printer driver as on the printer. 1.
Problems with the printing quality The back side of the paper is dirty Cause Corrective Action The Platen has become dirty after borderless printing Open the Top Cover and clean the Platen. or printing on small paper. (→P.589) The Paper Retainer is soiled. Clean the Paper Retainer. (→P.591) Printed colors are inaccurate Cause Corrective Action Color adjustment has not been activated in the Advanced Settings of the printer driver.
Problems with the printing quality Banding in different colors occurs Cause Corrective Action The paper feed amount is not adjusted correctly. Adjust the feed amount. (→P.549) Printing does not proceed smoothly because print jobs are interrupted during transmission. Exit other applications and cancel other print jobs. In the printer menu, Print Length is specied in Feed Priority. Selecting Band Joint may improve printing results.
Problems with the printing quality Colors in printed images are uneven Cause Corrective Action Line Drawing/Text is selected when printing images Specify Image in the printer driver. in many solid colors. You are printing on paper that curls easily. Printed colors may appear uneven on the leading edge of paper that is susceptible to curling. Increase the level of vacuum holding the paper against the Platen or specify a margin of 20 mm (0.79 in) or more for the leading edge. (→P.
Problems with the printing quality The length of printed images is inaccurate Cause Corrective Action In the printer menu, Band Joint is specied in Feed Priority. To ensure the feed amount matches the paper size, select Print Length in Feed Priority in the printer menu and enter the amount for adjustment in Adjust Length. You can adjust the feed amount in 0.02 0ncrements. (→P.48) Documents are printed crooked Cause Corrective Action Skew Skew Check Lv. has been set to Loose or Off.
Problems with the printing quality Thin lines are not printed after switching to Economy Printing mode Cause Corrective Action You have selected Economy Printing in the printer driver before printing. Clear the Economy Printing check box in the printer driver and try printing again. Problems with the printing quality caused by the type of paper For paper-specic troubleshooting tips to improve the printing quality, refer to the Paper Reference Guide. (→P.
Cannot print over a network Cannot print over a network Cannot connect the printer to the network Cause Corrective Action The Ethernet cable is not connected correctly to the printer’s Ethernet port. 1. Make sure the printer is connected to the network with the correct Ethernet cable, and then turn the printer on. For instructions on connecting the cable, refer to the Quick Start Guide. 2. Make sure the Link indicator is lit.
Cannot print over a network Cannot print over a NetWare network Cause Corrective Action The printer’s NetWare settings are not congured correctly. Make sure the printer’s NetWare settings are congured correctly. In particular, make sure a valid frame type is selected. For details, see “Conguring the Printer’s NetWare Network Settings”. (→P.511) The computer you are trying to print from is not congured correctly. Make sure the computer’s NetWare settings are congured correctly.
Installation problems Installation problems The IEEE 1394 Driver Cannot Be Installed Correctly In Windows, the device interface driver may not be installed correctly in some cases if you connected the IEEE 1394 cable before installing the printer driver. If so, reinstall the IEEE 1394 device interface driver and the printer driver as follows. Important • This procedure is based on an example for Windows XP. The name of the wizard may be different in other operating systems. 1. 2. 3. 4.
Installation problems Removing Installed Printer Drivers Follow the steps below to remove installed printer drivers and utilities. Removing printer drivers (Windows) Remove the printer driver as follows. Note • In Windows 2000/Windows XP/Windows Server 2003/Windows Vista, you must log on with administrative rights such as “Administrator” account. 1. From the Windows start menu, select Programs > Canon Printer Uninstaller > imagePROGRAF Printer Driver Uninstaller to display the Delete Printer window.
HP-GL/2 problems HP-GL/2 problems With HP-GL/2, printing is misaligned. Cause The plotter origin is incorrect. Corrective Action Check the printing commands. Lines or images are missing in the HP-GL/2 data that was printed. Cause Corrective Action The memory is full. Check the size of the data in the print job. An HP-GL/2 command not supported by this printer was received. Check the print job and settings. The printer has received print data that includes HP RTL commands when Auto Rotate is On.
HP-GL/2 problems Replotting with HP-GL/2 jobs is not possible. Cause The data was lost because of replotting. Corrective Action Data for replotting is lost after the following operations. In this case, send the print job again. • The memory buffer was cleared from the Control Panel. • The printer was turned off. • The printer has received a new HP-GL/2 print job.
Other problems Other problems The printer does not go on Cause Corrective Action The printer is unplugged. Plug the power cord into the outlet, and then turn on the printer. The specied voltage is not supplied. Check the voltage of the outlet and breaker. (→P.70) If the Printer Makes a Strange Sound The following sounds do not indicate a problem with the printer.
Other problems The printer consumes a lot of ink Cause Corrective Action Many full-page color images are printed. In print jobs such as photos, images are lled with color. This consumes a lot of ink. This does not indicate a problem with the printer. Head Cleaning B is used often. Head Cleaning B consumes a lot of ink. This does not indicate a problem with the printer.
Other problems Disabling ink level detection 1. On the Display Screen, a message indicates that the ink level cannot be detected. After checking the message, press the ► button. 2. Press ▲ or ▼ to select Information, and then press the OK button. 3. A conrmation message is shown on the Display Screen about disabling ink level detection. After checking the message, press the ► button. 4. After checking the message, press the ► button. 5. Press ▲ or ▼ to select Yes, and then press the OK button.
Other problems 7. Check the message and press the ► button. 8. Press ▲ or ▼ to select Yes, and then press the OK button. 9. A conrmation message about updating ink information is shown on the Display Screen. After checking the message, press the ► button. 10. Press ▲ or ▼ to select Yes, and then press the OK button. Ink level detection is now disabled, and the printer goes online.
Responding to Messages Error Message Responding to Messages Responding to Messages Warning messages Warning messages are shown on lines 2-4 of the Display Screen. Although warning messages do not prevent printer operation, you should check the message and take the appropriate action. (→P.629) Error messages (if action can be taken) Error messages are indicated on the Display Screen if you must respond before the printer can resume operation. Check the message and take the appropriate action. (→P.
Responding to Messages Other Messages These messages do not prevent printer operation. Check the information on the Display Screen and take action as necessary. Messages requiring special attention are as follows: Note • Messages are also displayed in imagePROGRAF Status Monitor (Windows) or imagePROGRAF Printmonitor (Macintosh).
Responding to Messages Error Messages Warning messages Warning messages are shown on lines 2-4 of the Display Screen. Although warning messages do not prevent printer operation, you should check the message and take the appropriate action. • • • • • • • • • • • • • • GARO Wxxxx (x represents a number) (→P.645) GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904) (→P.644) GL2: W0502 The parameter is out of range. (→P.644) GL2: W0504 This command is not supported. (→P.644) Ink Level: Check (→P.
Responding to Messages • • • • • • • • • • • • • • • No Maintenance Cartridge capacity. (→P.643) Paper Mismatch (→P.631) Paper jam. (→P.635) Paper loaded askew. (→P.635) Papr Size Mismatch (→P.631) Paper size not detected. (→P.632) Papr Type Mismatch (→P.631) Leading edge detection error. (→P.636) Cannot cut this paper. (→P.636) Cannot feed paper. (→P.636) Cannot detect papr (→P.635) Rel lever is in wrong position. (→P.636) Roll printing is selected. (→P.
Messages regarding paper Messages regarding paper Paper Mismatch Cause Corrective Action You printed a test pattern for printer adjustment on several sheets, but sheets of different types or sizes of paper were used. When printing a test pattern, use sheets of the same type and size of paper. Papr Type Mismatch Cause The paper type as specied on the printer does not match the type specied in the printer driver.
Messages regarding paper Paper size not detected. Cause Paper has been loaded askew, or warped paper has been loaded. Corrective Action Reload paper straight, in the correct position. (→P.110) (→P.135) Insufcient paper for job Cause The printer has received a print job longer than the amount of roll paper left. Corrective Action Follow the steps below to replace the roll. 1. Remove the roll. (→P.113) (→P.114) (→P.115) 2. Load a roll with enough paper left. (→P.107) (→P.109) (→P.110) 3.
Messages regarding paper Roll printing is selected. Cause You have attempted to print a test print sheet or other printer status information on a roll, but no roll is loaded. Corrective Action Load a roll and try printing again. To print on a sheet instead, hold the Stop button for more than a second to cancel printing, load a sheet, and then print. (→P.81) Roll printing is selected, but sheets are loaded. Cause A print job for rolls was received when a sheet is loaded.
Messages regarding paper No sheets. Cause A sheet is not loaded. Corrective Action Load paper of the type and size you have specied in the printer driver. (→P.135) Hold down the Stop button for a second or more to cancel printing. Sheet printing is selected. Cause Corrective Action You have attempted to print a test print sheet or other Load a sheet and try printing again. printer status information on a sheet, but no sheet To print on a roll instead, hold the Stop button for is loaded.
Messages regarding paper Paper jam. Cause A paper jam occurred in the printer during printing. Corrective Action Lift the Release Lever and remove the jammed paper. (→P.116) (→P.140) Paper loaded askew. Cause Paper has been loaded askew. Corrective Action Follow the steps below to reload the roll. 1. Open the Top Cover. 2. Push the Release Lever back. 3. Align the right edge of the roll paper parallel to the Paper Alignment Line. 4. Pull the Release Lever forward. 5. Close the Top Cover. 6.
Messages regarding paper Leading edge detection error. Cause Corrective Action A roll has been loaded when sheets are selected as the paper source on the Control Panel. Either remove the roll and load a sheet or select the roll as the media source on the Control Panel. The sheet is loaded askew. Reload the sheet straight, in the correct position. (→P.135) Cannot feed paper. Cause Paper came out of the feed path during feeding. Corrective Action Reload the paper correctly and advance it again. (→P.
Messages regarding paper Borderless printng not possible. Check roll position. Cause The paper is loaded askew. Corrective Action Press the Load/Eject button and reload the paper. Insert the roll rmly until it touches the ange of the Roll Holder. (→P.107) (→P.109) (→P.110) If you press the Online button and continue printing, the document will be printed with a border. The paper loaded is not compatible with borderless printing. Load paper compatible with borderless printing and try printing again.
Messages regarding ink Messages regarding ink Ink insufcient. Cause Corrective Action The ink level is low, so you cannot clean the Printhead. Press the OK button and replace the Ink Tank that is low with a new Ink Tank. (→P.559) The ink level is low, so there may not be enough ink to nish printing. Press the OK button and replace the Ink Tank that is low with a new Ink Tank. (→P.559) You can print until the ink runs out by pressing the Online button.
Messages regarding ink Remaining level of the ink cannot be correctly detected. Cause Ink level detection cannot work correctly if you use rell ink tanks. Corrective Action The rell ink tank can no longer be used. See the section “Ink level detection” and take the appropriate action. (→P.624) Ink Level: Check Cause Not much ink is left. Corrective Action Prepare a new Ink Tank.
Messages regarding printing or adjusment Messages regarding printing or adjusment Use another paper. Cause Corrective Action The Printhead and feed amount cannot be adjusted when highly transparent lm is loaded. We recommend using a type of paper that you often use, other than lm, for Printhead adjustment. (→P.542) Adjust the feed amount manually. (→P.552) Cannot print as specied. Lift the release lever and replace paper with A4/LTR (vertical) or larger Cause The loaded paper is too small.
Messages regarding printheads Messages regarding printheads Cannot adjust printhead. Cause The Printhead nozzles are clogged. Corrective Action Follow the steps below to check the nozzles. 1. Print a test pattern to check the nozzles. (→P.567) 2. Clean the Printhead if the nozzles are clogged. (→P.568) Highly transparent lm is loaded that cannot be used We recommend using a type of paper that you often for Printhead adjustment. use, other than lm, for Printhead adjustment. (→P.542) Cannot adjust band.
Messages regarding printheads Printhead error Cause Corrective Action An incompatible Printhead has been installed. Install a Printhead specied for use with the printer. (→P.569) There is a problem with the Printhead. Open the Top Cover. If the Carriage is over the Platen, replace the Printhead with a new one. (→P.569) If, after opening the Top Cover, you see that the Carriage is not over the Platen, follow the steps below. 1. Close the Top Cover and press the Online button. 2. Replace the Printhead.
Messages regarding the maintenance cartridge Messages regarding the maintenance cartridge No maintenance cartridge. Cause The Maintenance Cartridge is not installed. Corrective Action Install the Maintenance Cartridge. (→P.579) Prepare for maint cart replacement. Cause The Maintenance Cartridge is almost full. Corrective Action You can continue to print, but prepare a new Maintenance Cartridge to use when the message for replacement is displayed. No Maintenance Cartridge capacity.
Messages regarding HP-GL/2 Messages regarding HP-GL/2 This type of paper is not compatible with HP-GL/2. Cause The printer has received a HP-GL/2 print job that cannot be printed on the paper that has been advanced. Corrective Action Replace the paper with a type compatible with HP-GL/2. For details on paper compatible with HP-GL/2, refer to the Paper Reference Guide. (→P.95) The printer may continue printing, but the printing quality may be affected. Check the printing results. There is no data.
Other Messages Other Messages GARO Wxxxx (x represents a number) Cause There is a problem with the print job. Corrective Action Try printing again, using the correct printer driver. It is also possible to continue printing in this state. However, you may not be able to obtain the desired printing results. ERROR Exxx-xxxx (x represents a letter or number) In the following situations, turn off the printer and wait at least three seconds before restoring power.
Other Messages Carriage Cover is open. Cause The Carriage Cover is open. Corrective Action Close the Carriage Cover. (→P.569) If the error occurs again, turn off the printer and wait a while before restoring power. Prepare for parts replacement. Cause It is almost time to replace consumables for which service is required. Corrective Action If Parts replacement time has passed. is displayed, you can continue to use the printer for some time. Contact your Canon dealer for assistance.
Index Index A Borderless Printing..................................................263 Borderless Printing at Actual Size...................253, 283 About This User Manual..............................................1 Borderless Printing....................................253, 283 Accessing the Printer Driver Dialog Box from Applications (Mac OS 9)..........................................483 Borderless Printing Method.......................
Index Cannot connect the printer to the network..............617 Color Adjustment Sheet: Color (Windows)..............427 Cannot cut this paper..............................................636 Object Adjustment dialog box............................428 Cannot detect papr..................................................635 Cannot feed paper...........................................634, 636 Color Adjustment Sheet: Monochrome (Windows)...............................................................
Index Checking a print preview...................................479 Confirming Print Settings (Mac OS X).....................456 Checking a preview of the settings....................456 Checking a print preview...................................457 E Email Notification When Printing is Finished or Errors Occur............................................................515 Confirming Print Settings (Windows)....................... 411 End of paper feed....................................................
Index How to use this manual...............................................1 Loading Rolls on the Roll Holder.............................107 HP-GL/2 jobs are printed in monochrome (or color)..................................................................621 Loading the Roll in the Printer................................. 110 HP-GL/2 Printing.....................................................166 HP-GL/2 printing takes a long time.........................621 HP-GL/2 problems..........................
Index Manually Loading Paper to the Position for Printing....................................................................138 Page Setup Sheet (Windows).................................433 Matching Sheet (Windows).....................................429 Paper cannot be cut................................................606 Driver Matching Mode.......................................429 Paper Information on Printer Dialog Box (Mac OS X)..............................................................
Index Submenu mode, and state of the Control Panel...................................................................28 Printing Line Drawings and Text (Windows, Mac OS X).............................................157 Printer Parts..............................................................13 Easy Settings....................................................157 Printer Specifications.................................................70 Print Target......................................................
Index Printing Originals Centered on Rolls.......................342 Printmonitor.....................................................474, 500 Centering originals relative to roll paper width..342 Problem with Printhead...........................................641 Printing Originals Centered on Rolls (Mac OS 9)....348 Problems Regarding Paper.....................................601 Printing Originals Centered on Rolls (Mac OS X)...345 Problems with the printing quality............................
Index Resizing Originals by Entering a Scaling Value (Windows)...............................................................230 Using NWADMIN or PCONSOLE to set up the print server........................................................525 Resizing Originals to Fit the Roll Width...................220 Specifying NetWare Protocols.................................527 Enlarged/Reduced Printing...............................220 Specifying Paper in the Printer Driver.....................
Index The Display Screen indicates the system is filling with ink............................................................607, 639 The edges of the paper are dirty............................. 611 Edit Using PosterArtist......................................448 Using PosterArtist to Compose Originals (Windows)...............................................................449 The IEEE 1394 Driver Cannot Be Installed Correctly..................................................................
©CANON INC.
