Specifications

© 2008 Buyers Laboratory Inc. WARNING: This material is copyrighted by Buyers Laboratory Inc. and is the sole property of Buyers Laboratory. Duplication of this proprietary report or excerpts from this report, in any
manner, whether printed or electronic (including, but not limited to, copying, faxing, scanning or use on a fax-back system), is illegal and strictly forbidden without written permission from Buyers Laboratory. Violators will
be prosecuted to the fullest extent of the law. To purchase reprints of any BLI reports or articles, contact us at [e-mail]. Buyers Laboratory Inc., 20 Railroad Avenue, Hackensack, NJ 07601 USA.
22
LAB TEST
Canon imagePROGRAF iPF710
Buyers LaBoratory LAB TEST REPORT—European Edition
© 2008 Buyers Laboratory Inc. WARNING: This material is copyrighted by Buyers Laboratory Inc. and is the sole property of Buyers Laboratory. Duplication of this proprietary report or excerpts from this report, in any
manner, whether printed or electronic (including, but not limited to, copying, faxing, scanning or use on a fax-back system), is illegal and strictly forbidden without written permission from Buyers Laboratory. Violators will
be prosecuted to the fullest extent of the law. To purchase reprints of any BLI reports or articles, contact us at [e-mail]. Buyers Laboratory Inc., 20 Railroad Avenue, Hackensack, NJ 07601 USA.
23
LAB TEST
Canon imagePROGRAF iPF710
Buyers LaBoratory LAB TEST REPORT—European Edition
Colour Density Readings – Heavy Weight Satin Photo Paper
Speed Draft Default Highest Quality
Dot Fill 100% 50% 100% 50% 100% 50%
Cyan N/A N/A .79 .53 .79 .54
Magenta N/A N/A 1.34 .43 1.31 .42
Yellow N/A N/A 1.00 .45 .98 .45
Black N/A N/A 1.46 .41 1.45 .41
Note: Colour density readings (Dot Fill) were measured on solid colour patches and at 50% density for plain and HeavyWeight
Satin Photo papers at draft, default and highest quality settings.
N/A: Mode not available for Heavy Weight Satin Photo Paper
Black Print Quality – Plain Paper
Text Good
Line Art Good
Halftone Pattern Good
Halftone Range Good
Solids Very Good
Black Density – Plain Paper
Speed Draft Default Highest Quality
Density 1.13 to 1.25 1.36 to 1.40 1.32 to 1.39
Note: Solid black density measurements are based on eight readings corresponding to eight different solid black locations
on the output.
Print density for inkjet-based printers tested to date:
1.06 to 1.48
Halftone range:
Grayscale is clearly visible from the 1% to 91% dot-ll levels,
with distinct transitions between levels and consistent ink
coverage within levels.
Typical halftone range for colour inkjet printers:
From the 4% to 90% dot-ll levels.
0 1.00.5
iPF710
Print density (default)
21.5
Range for
tested units