Specifications

© 2008 Buyers Laboratory Inc. WARNING: This material is copyrighted by Buyers Laboratory Inc. and is the sole property of Buyers Laboratory. Duplication of this proprietary report or excerpts from this report, in any
manner, whether printed or electronic (including, but not limited to, copying, faxing, scanning or use on a fax-back system), is illegal and strictly forbidden without written permission from Buyers Laboratory. Violators will
be prosecuted to the fullest extent of the law. To purchase reprints of any BLI reports or articles, contact us at [e-mail]. Buyers Laboratory Inc., 20 Railroad Avenue, Hackensack, NJ 07601 USA.
10
LAB TEST
Canon imagePROGRAF iPF710
Buyers LaBoratory LAB TEST REPORT—European Edition
© 2008 Buyers Laboratory Inc. WARNING: This material is copyrighted by Buyers Laboratory Inc. and is the sole property of Buyers Laboratory. Duplication of this proprietary report or excerpts from this report, in any
manner, whether printed or electronic (including, but not limited to, copying, faxing, scanning or use on a fax-back system), is illegal and strictly forbidden without written permission from Buyers Laboratory. Violators will
be prosecuted to the fullest extent of the law. To purchase reprints of any BLI reports or articles, contact us at [e-mail]. Buyers Laboratory Inc., 20 Railroad Avenue, Hackensack, NJ 07601 USA.
11
LAB TEST
Canon imagePROGRAF iPF710
Buyers LaBoratory LAB TEST REPORT—European Edition
 The print driver’s “Draft” setting is available for selected media for users
who require the fastest output possible on the iPF710, although, as would
be expected, with some sacrice to image quality.
+ The Status Monitor can be displayed either as a pop-up window or as a task-
bar icon and can be congured to automatically launch either when printing
starts and/or when the Windows operating system is started. Errors and/or
warnings such as ink out, paper out and ink low can be set to display.
 Ink-low or ink-out conditions are reported in the Web page and in the Status
Monitor in 20-percent increments. Users should have replacement tanks on-
hand when a status of 20 percent is displayed. When one matte black car-
tridge is empty, printing will stop even though the second matte black tank
may not be empty.
 There are three paper type mismatch settings selectable in the control
panel, which govern how a mismatch in paper size or type will be handled.
Users can choose “None,” which will ignore the mismatch. Choosing “Warn-
ing” will display a warning message both on the control panel and in the
Status Monitor, but will still print the job. Or users can choose “Pause,”
which will pause the job from printing until corrective action is taken.
 The Web page (Remote User Interface) offers much of the same information
that is found in the Status Monitor. The most noteworthy features found
FEEDBACK TO WORKSTATIONS
VERY GOOD
