Operation Guide

Button Function
[Stop after job]
Stop the print process, after the selected job is printed.
[Ticket]
When you give the [Ticket] command, the job ticket print goes to
the last position of the list of scheduled jobs. You can recognise
the job ticket print by the prefix "Properties of" in front of the job
name.
[To top]
To print a scheduled job as soon as possible but not immediately,
use the [To top] function. The job goes to the first position of the
list of scheduled jobs.
The buttons for [Waiting jobs]
Button Function
[Copy to]
Copy the selected job to another printer.
Creates a copy of the selected job on the selected target printer.
Al settings done on the printing system either local or via PRISMA-
sync Remote Manager are lost during the copy to the other print-
er. Only the original setting in the job are kept.
For a complete description see
Copy jobs between printers on
page 19.
[Delete]
Delete the selected jobs.
[Print]
Moves the selected job to [Scheduled jobs] for printing.
The job is added to the end of the queue.
[Proof]
You can make a proof print of jobs that are ready for the print
process in the list of waiting jobs and in the DocBox. The proof
print does not affect the number of sets that the print system
prints for the job. The proof print is an additional set.
[Properties]
Open the properties window to change the properties of the selec-
ted job.
NOTE
If someone else is currently changing the properties of
this job, the job is greyed out and cannot be selected.
For further information see The properties view on page 62.
[Select] Select jobs based on the following options:
• [All]
• [None]
• [Invert selection]
• [Jobs with available media ]
• [Jobs with a certain label ]
4
The button bars
Chapter 6 - Views
59
PRISMAsync Remote Manager