Operation Guide

Possible actions in this view
Select one or more jobs and use the button bar to carry out the required action.
See
The button bars on page 58 for a description of the available actions and buttons.
The button bars
Definition
Select one or more jobs in one of the printer queues and you will see a button bar with the
functions described below.
If there is not enough room, buttons can be combined under a [Collapse] button
.
Each location has different options.
The buttons for [Scheduled jobs]
Button Function
[Copy to]
Copy the selected job to another printer.
Creates a copy of the selected job on the selected target printer.
Al settings done on the printing system either local or via PRISMA-
sync Remote Manager are lost during the copy to the other print-
er. Only the original setting in the job are kept.
For a complete description see
Copy jobs between printers on
page 19.
[Delete]
Delete the selected jobs or the [Stop after job] bar.
You cannot delete jobs that are being printed.
[Move]
Move the selected job to the [Waiting jobs].
You cannot move jobs that are being printed.
[Print now]
The [Print now] button allows to print a job immediately. The print
system stops the active print job after the current set has finished.
After this printing continues.
[Properties]
Open the properties window to change the properties of the selec-
ted job.
NOTE
If someone else is currently changing the properties of
this job, the job is greyed out and cannot be selected.
For further information see The properties view on page 62.
[Select] Select jobs based on the following options:
• [All]
• [None]
• [Invert selection]
• [Jobs with available media ]
• [Jobs with a certain label ]
4
The button bars
58
Chapter 6 - Views
PRISMAsync Remote Manager