Operation Guide

Media status information
Definition
Each job in the [Schedule] contains a small coloured bar at the bottom.
This coloured bar is an indication about the status of the media and output locations used by the
job.
You can use the Colour to determine if action is necessary.
Colour Meaning
Green No problems and no action required.
Grey There is no information about this item.
Some supported printer do not provide all information to PRISMA-
sync Remote Manager
Yellow The time gap in which you need to solve the problem that is com-
ing up.
Orange
A problem will occur in due time if no action is taken.
The warning icon in the time line will show at what time the prob-
lem occurs.
If the orange bar reaches time 0 the printer shows a red warning
bar and printing stops.
Red
A problem has occurred and printing has stopped.
The warning icon in the time line will show what problem occur-
red.
Use the [More] button to show detailed media status information.
This sample view shows the A4 media will run out shortly.
You can see the following information
• If the required media for a job is available.
• If the media runs out during a job.
• If an output location has to be emptied during a job.
Also the printer tile contains a link to the available media of the printer .
You can check the resources of the printer at any time here.
Media status information
Chapter 6 - Views
55
PRISMAsync Remote Manager