Operation Guide

NOTE
Page programming is only available if the license is installed on the printer.
Used media
Gives an overview of all media used by the job.
Click any of the displayed media to change the media type.
Available settings
You can change settings in the following categories:
• [Media]
• [Layout]
• [Image]
• [Finishing]
• [Production]
These settings are the same settings that are available on the PRISMAsync controller of the
printer.
The available settings depend on the type of print job and the printer capabilities.
NOTE
When you select an impossible combination of settings, the conflicting setting will become
orange.
You cannot continue until you solve the conflict.
Click on the orange setting and select the indicated (correct) setting to solve this problem.
For additional information on the available settings see the printer Operation guide.
Submit job extra settings
52
Chapter 6 - Views
PRISMAsync Remote Manager