Operation Guide

Some examples are Calibration required, Low on toner, Out of toner , Finisher offline etcetera.

• Click on the printer tile to go to the printer view.

The printer view allows the same functionality as the control panel of the printer. Only the

bundle functionality is missing.

For further information see

The printer view

on page 57.

Click outside of the printer view to return to the main view.

For a full description see

Monitor printers

on page 16

Submit job

Introduction

When you add a new job you get a this basic dialogue to enter the settings for the job.

The default values in this window are the values you last used. Only [Media] is set to [As in

document] and [Number of sets] is set to 1

If you use drag and drop the values for printer and destination are already filled in. Values not

applicable to the selected printer are set to the defaults for this printer.

The following options are available in this dialogue:

[Submit job] window

Option Description

[Job] This field contains the job name and size.

You can change the job name.

[Printer] Select which printer must print this job.

NOTE

Only available if you use the + job button in the schedule view be-

cause then the destination printer is unknown.

[Automated

workflow]

Select an [Automated workflow] for this job if required.

Automated workflow can be setup on the printing system. Automated work-

flow handles print jobs in a predefined way (e.g. booklet with cover of differ-

ent media etc). The Printer Operation guide contains a full description of this

functionality.

NOTE

Automated workflow can override the settings in the print job.

[Automated workflow] is a licensed option. If there is no license

this feature is not available.

Submit job

Chapter 6 - Views

PRISMAsync Remote Manager