Operation Guide

Proxy servers and firewalls
PRISMAsync Remote Manager does not support proxy servers.
When you use a firewall or proxy server check that the required network ports are open.
See :
Which protocols and ports are used by PRISMAsync Remote Manager? on page 36.
Printing protocol
PRISMAsync Remote Manager uses the LPR protocol for the [Copy to] function.
To use LPR check that LPD is enabled on the printing system.
The LPD setting can be found in Settings Editor at this position :[Configuration] -> [Connectivity] -
> [LPD] -> [LPD enabled].
Copy jobs between printers
20
Chapter 2 - Common tasks
PRISMAsync Remote Manager