Operation Guide

Error or other situation that prevents printing
The tile above shows that the printer has stopped printing. You can click on the red bar to see
more information.
Operator intervention is needed to continue printing.
Some examples of the situations are:
• The printer is on hold.
• The required media has run out.
• The printer does not have the required media.
use the media status view to see what media is missing. See
Media status information on
page 55.
• The printer has an error that prevents further printing.
Attention needed
The tile above shows that the printer is operational but it needs a calibration.
Use the printer operation guide to calibrate the printer.
All the special icons that show on the control panel of the printer can also show up in the printer
tile.
Some examples are Low on toner, Out of toner , Finisher offline etcetera.
Transaction printing mode active
The tile above shows that the printer is operational but is in transaction printing mode.
This is a regular operational mode for the printer.
Monitor printers
Chapter 2 - Common tasks
17
PRISMAsync Remote Manager