Manualshelf

Operation Guide

ManualsBrandsCanon ManualsColor imagePRESS Digital PressesCanon imagePRESS C7011VPS/C6011VPS/C6011S
11121314151617181920
How to start PRISMAsync Remote Manager
Before you begin
You need:
• the network address of the system that runs PRISMAsync Remote Manager.
Check that the system is configured properly see
Enable PRISMAsync Remote Manager
on
page 30.
• a supported web browser.
See
Supported web browsers
on page 9.
• When you use a firewall or proxy server check that the required network ports are open.
See :
Which protocols and ports are used by PRISMAsync Remote Manager?
on page 36.
Starting PRISMAsync Remote Manager
1. Start the browser.
2. Enter the network address of the system that runs PRISMAsync Remote Manager.
Example : http://remotemanager-address/.
This will start Settings Editor on the printing system.
3. Click on [Remote Manager] in the upper right corner of the screen.
4. Logon with your credentials.
5. PRISMAsync Remote Manager starts now.
See
The Schedule view
on page 46.
NOTE
Alternatively you can start PRISMAsync Remote Manager directly via : http://
remotemanager-address/RuiClient.
How to start PRISMAsync Remote Manager
12
Chapter 2 - Common tasks
PRISMAsync Remote Manager