Owner's Manual

When the main power is turned off during operations (check
the stacker)
Introduction
If the main power is tuned off during operations, the cuttings may remain in the stacker.
When the main power is turned off during operations (check the stacker)
1.
After turning the main power on again, open the stacker and check if the cuttings remain
in it.
2.
If the cuttings remain in the stacker, remove all of the cuttings from the stacker.
#
CAUTION
Do not operate the machine when the cuttings remain in the stacker, as this may
result in a malfunction.
Chapter 4 - Troubleshooting 87
When the main power is turned off during operations (check the stacker)