Owner's Manual

Check the status of the trimmer waste unit
Introduction
The perfect binder contains a trimmer waste unit. The trimmer waste unit contains the
cuttings that result from the trimming process. You can check the status of the trimmer
waste unit in the dashboard (see manual of the printer) and in the 'System' view of the
printer. The icons in the following table indicate the status of the trimmer waste unit.
#
NOTE
Only when the trimmer waste unit is full, the status is visible in the dashboard.
The meaning of the trimmer waste unit icons
The waste box icons#
DescriptionTrimmer waste
unit icon
The trimmer waste unit icon is blue. The waste box inside the
icon is grayed out. The trimmer waste unit status is: 'Absent'.
The trimmer waste unit icon is blue. The trimmer waste unit
is not full. The trimmer waste unit status is: 'OK'.
The trimmer waste unit icon is red. The trimmer waste unit
status is: 'Full'. The printer stops.
To continue printing, empty the trimmer waste unit (see ‘Dis-
card cuttings’ on page 52).
Check the status of the trimmer waste unit
1.
Check the trimmer waste unit icon in the dashboard.
#
NOTE
Only when the trimmer waste unit is full, the status is visible in the dashboard.
2.
Touch the 'System' button.
3.
Press 'Printer'.
The 'System' view displays the status of the trimmer waste unit.
Chapter 4 - Troubleshooting78
Check the status of the trimmer waste unit