Owner's Manual

Main power
How to turn the main power on
Introduction
This product has two switches for controlling power: a main power switch and a Energy
saver. A breaker is also equipped to detect over current and short circuits.
How to turn on power
1.
Confirm that the power plug is plugged securely into a power outlet.
#
WARNING
Never plug in or unplug the power plug while your hands are wet. Doing so
creates the risk of electric shock.
2.
Open the power switch cover and press the ON side (I) of the power switch to turn on
power.
#
IMPORTANT
If the unit does not operate when you turn on the power switch, check if the breaker
is OFF. See ‘Power does not turn on’ on page 86.
#
NOTE
The binder goes to energy save mode immediately after the power switch is turned
on. To turn off the energy save mode, press the energy saver. See ‘Energy saver and
energy save mode’ on page 35.
3.
Close the power switch cover.
Chapter 2 - Before you start using this machine 33
How to turn the main power on