User Manual

The power buttons and power modes
The power buttons
The printer has the following switches and buttons to control the power supply.
■
Power switch
The power switch is located on top of the fusing unit of the printer. The power switch
connects and disconnects the printer to the power outlet.
■
Sleep button with LED.
The Sleep button is located at the right-hand side of the operator panel.
The Sleep button on the printer allows you to switch between the Ready mode and
the Sleep mode. This is only possible if the power switch is in the 'I' position and
the start-up phase is completed.
The power modes
The power modes#
DescriptionOperator pan-
el
Sleep buttonPower mode
The printer is completely off.
The power switch is in the 'O'
position. There is no power
consumption. The printer can-
not receive or print jobs.
OffOffOff
The printer is ready to print
jobs.
OnOffReady
The printer automatically enters
the low-power mode after the
time that was defined in the Set-
tings Editor and no button was
pressed.
The printer wakes up when a job
arrives in the list of Scheduled
jobs or when you touch a but-
ton. The printer will start to
warm up.
OffOnLow power
Chapter 5 - Power information90
The power buttons and power modes