User Manual

The stacker/stapler, optional inserter and optional integrated
punch unit
Introduction
With the Finisher-AJ1 and Saddle Finisher-AJ2 you can stack and staple prints. With
the Saddle Finisher-AJ2 you can also saddle stitch booklets. With the optional Puncher
Unit-BC1/BD1/BB1 you can punch holes in your prints.
External view
(I side)
( side)
1
2
3
2
3
4
5
6 6
7
7
8
[19] The Saddle Finisher-AJ2 with inserter (left side) and Finisher-AJ1 (right side)
Main parts#
FunctionComponent
Press to the "I" side to turn on the
stacker/stapler.
Main power switch1
Open the top cover to clear a paper
jam inside the unit.
Top cover2
Open the front cover to replace the
staple cartridge, remove jammed pa-
per, or clear a staple jam in the stapler
unit and saddle stitcher unit.
Front cover3
Receives saddle stitched booklets.Booklet tray
Saddle Finisher-AJ2 only
4
Chapter 2 - Main parts 43
The stacker/stapler, optional inserter and optional integrated punch unit