User Manual

Perform the '2. Auto gradation adjustment' procedure separately
1.
Touch 'System' -> 'Color management'.
2.
Press '2. Auto gradation adjustment'.
3.
Touch one of the following options.
■
'Full adjustment' (recommended)
■
'Quick adjustment'
4.
From the 'Calibration method' window, select 'Automatic (internal sensor)' and touch
'OK'.
An instruction window opens.
Wait a few minutes while the printer performs the '2. Auto gradation adjustment'.
5.
Remove the test prints.
6.
Press 'OK'.
7.
Press 'Finish'.
■ Calibrate the printer - 1. Shading correction, on page 345
■ Calibrate the controller - 3. Media family calibration, on page 349
Chapter 11 - Maintenance and calibration348
Calibrate the printer - '2. Auto gradation adjustment'