User Manual

Clean the roller (main unit)
Introduction
If dirt or streaks appear on printed output, clean the roller inside of the main unit.
#
NOTE
■
It takes approximately one minute to clean the roller.
■
Roller cleaning cannot be performed during printing.
Clean the roller (main unit)
1.
Touch 'System' -> 'Maintenance'.
2.
Press 'Start maintenance'.
3.
Touch 'Clean the clean roller (main unit)' and touch 'Start' .
A wizard opens.
4.
Touch 'Next'
A status message displays.
5.
Press 'Finish'.
6.
Touch 'Stop' to close the 'Maintenance tasks' menu.
■ The main unit, on page 20
Chapter 11 - Maintenance and calibration338
Clean the roller (main unit)