User Manual

Disable the warning time
Introduction
When operator interaction is required now or soon, the dashboard and the operator at-
tention light warn you. However, you can disable this warning function.
Disable the warning time
1.
Touch 'System' -> 'Setup' -> 'Warning time' (under 'Operator panel').
When the box for 'Warning in advance' has a check mark and states 'On', the function
is enabled.
2.
Touch the 'Warning in advance' button.
The check mark disappears. The status 'On' changes into 'Off'.
3.
Press 'OK'.
■ The dashboard, on page 80
■ The operator attention light, on page 40
Chapter 10 - Adapt printer settings to your needs 313
Disable the warning time