User Manual

When returning the staple case, always make sure that the staple case is inserted until the
arrows are aligned as shown in the diagram.
#
IMPORTANT
Follow steps 3 to 8 to replace the other staple cartridge in the saddle stitcher unit.
9.
Gently push the saddle stitcher unit (F-C4) back into the machine.
Always make sure to push the saddle stitcher unit in as far as it can go.
#
CAUTION
When returning the saddle stitcher unit to its original position, be careful not
to get your fingers caught, as this may result in personal injury.
Chapter 9 - Paper, toner, and staples 303
Replacing the staple cartridge in the saddle stitcher unit