User Manual

Make sure that the two black adjustment screws are fastened securely.
12.
Remove the second stack of paper, such as A4 paper if you have loaded next to the first
stack of paper.
#
IMPORTANT
If you have loaded a second stack of paper for fine adjustment, make sure to remove
it after adjusting the outer size change plate. Leaving the second stack of paper in the
paper tray may lead to a paper tray malfunction.
13.
Remove the spacer, and store it in the back of the rear edge retainer.
14.
Align the rear edge retainer with the marks of the desired paper size.
Chapter 9 - Paper, toner, and staples 255
Adjust the outer size change plate of the bulk paper module (optional)