User Manual

■
Press 'Start'.
Wait until an information window pops up.
#
IMPORTANT
Do NOT touch 'OK' yet. Continue with the next step of this procedure.
5.
Press the open button to open the paper tray.
6.
Remove the blue screw on the rear edge retainer (1) using a coin or something similar.
1
#
IMPORTANT
Do not loosen or remove the blue screw on the outer size change plate.
7.
Remove the rear edge retainer, then remove the spacer that is stored in the back of the
rear edge retainer.
Chapter 9 - Paper, toner, and staples 253
Adjust the outer size change plate of the bulk paper module (optional)