User Manual

4.
Lock the lever of the size change plate and fix it.
5.
Squeeze the lever on the outer size change plate below. Without releasing the lever, slide
the rear guide to align it with the desired paper size.
6.
Load all remaining paper whose size you want to change into the paper tray.
#
CAUTION
When loading paper into the paper tray, take care not to cut your hands on the
edges of the paper.
#
IMPORTANT
■
Do not load paper into the paper tray that has been previously printed onto, as
this may result in a malfunction or damage to the copier. Always use the special
feeder to feed paper when you want to print onto the back of a sheet of paper that
already has something printed on its front side (2nd side of 2-Sided print).
■
Paper which has been rolled or curled must be straightened out before loading it
into the paper tray.
■
Make sure that the height of the paper stack does not exceed the loading limit
mark on the inside of the paper tray.
■
Never place paper or any other items in the empty part of the paper tray next to
the paper stack. Doing so may cause paper jams.
Chapter 9 - Paper, toner, and staples232
Adjust the paper tray to hold a different media size